Hi all,
Some lm-sensor drivers for Fedora 13 (kernel 2.6.33) for the Nuvoton's chips were implemented.
They are put here for open use but without warranty. Use or modify them based on your own risk.
Driver 1 : for NCT6775 ..., in theory it also supports NCT5572, W83677HG
Driver 2 : for NCT6776 ..., in theory it also supports NCT5573, NCT5577, NCT5579
However these drivers only report generic voltage, temperature, and fan speed reading data.
No control parts were implemented because those should had been properly fine tuned by system maker.
Adjusting them could cause system unstable. That's not recommended.
Besides, there is some information about the current driver for W83667HG-B (w83627ehf) : it should be able
to support MB with NCT5571 chips on board in theory, and the effort needed would only be configuring sensors.conf.
Best Regards.
LC
===========================================================================================
The privileged confidential information contained in this email is intended for use only by the addressees as indicated by the original sender of this email. If you are not the addressee indicated in this email or are not responsible for delivery of the email to such a person, please kindly reply to the sender indicating this fact and delete all copies of it from your computer and network server immediately. Your cooperation is highly appreciated. It is advised that any unauthorized use of confidential information of Nuvoton is strictly prohibited; and any information in this email irrelevant to the official business of Nuvoton shall be deemed as neither given nor endorsed by Nuvoton.
<<attachment: NCT6776.zip>>
<<attachment: NCT6775.zip>>
_______________________________________________ lm-sensors mailing list lm-sensors@xxxxxxxxxxxxxx http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
