Supermicro support supplied the following info on the Winbond W83795AG on SuperMicro 7046T-NTR+ board Bus Type = SMBus One W83795AG Windbond W83795AG, Slave Address=0x2f (0x5E in 8-Bit format) ============================================================= Fan1 Fan Speed, Offset 0x2e RPM = 84375/Data Fan2 Fan Speed, Offset 0x2f RPM = 84375/Data Fan3 Fan Speed, Offset 0x30 RPM = 84375/Data Fan4 Fan Speed, Offset 0x31 RPM = 84375/Data Fan5 Fan Speed, Offset 0x32 RPM = 84375/Data Fan6 Fan Speed, Offset 0x33 RPM = 84375/Data Fan7 Fan Speed, Offset 0x34 RPM = 84375/Data Fan8 Fan Speed, Offset 0x35 RPM = 84375/Data Fan9 Fan Speed, Offset 0x36 RPM = 84375/Data CPU1 Voltage, Offset 0x11 Voltage = Data* 0.008 CPU2 Voltage, Offset 0x10 Voltage = Data* 0.008 +1.5V Voltage, Offset 0x12 Voltage = Data* 0.008 +5V Voltage, Offset 0x13 Voltage = Data* 0.008 * (40/10) +12V Voltage, Offset 0x14 Voltage = Data* 0.008/ (10./66.2) +5VSB Voltage, Offset 0x15 Voltage = Data* 0.008 * (40/10) CPU1 DIMM Voltage, Offset 0x17 Voltage = Data* 0.008 CPU2 DIMM Voltage, Offset 0x16 Voltage = Data* 0.008 +3.3V Voltage, Offset 0x1c Voltage = Data* 0.024 +3.3VSB Voltage, Offset 0x1d Voltage = Data* 0.024 VBAT Voltage, Offset 0x1e Voltage = Data* 0.024 CPU1 Temperature, Offset 0x26 Temperature = Data CPU2 Temperature, Offset 0x27 Temperature = Data System Temperature, Offset 0x1f Temperature = Data Chassis Intrusion, Bank 0, Offset 0x46, BitMask 0x40 1 = Bad, 0 = Good (Clear Bit: Bank 0, Offset 0x4d, BitMask 0x80) Power Supply Failure, GP21(From W83527HG) 1 = Good, 0 = Bad I don't yet understand how to use this info though. Ubuntu 10.10. -- Free as in lawsuit. _______________________________________________ lm-sensors mailing list lm-sensors@xxxxxxxxxxxxxx http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
