Hi, since 2.6.38-rc1, the following shows up in dmesg. Full dmesg is included below the signature. This is a Macmini1,1 i.e. a first-generation Intel-based mini. I haven't experienced any actual problem during usage but haven't used it a lot under 2.6.38-rc yet. applesmc: key=137 fan=1 temp=7 acc=0 lux=0 kbd=0 applesmc: init_smcreg() took 50 ms BUG: key f4891a1c not in .data! ------------[ cut here ]------------ WARNING: at kernel/lockdep.c:2701 lockdep_init_map+0xd8/0x442() Hardware name: Macmini1,1 Modules linked in: snd_hda_codec_idt snd_hda_intel snd_hda_codec applesmc(+) input_polldev snd_pcm rtc snd_timer i2c_i801 sg sr_mod cdrom snd sky2 snd_page_alloc Pid: 763, comm: modprobe Not tainted 2.6.38-rc2 #2 Call Trace: [<c1029b5b>] ? warn_slowpath_common+0x60/0x75 [<c1029b7f>] ? warn_slowpath_null+0xf/0x13 [<c104a15a>] ? lockdep_init_map+0xd8/0x442 [<c10cbea1>] ? sysfs_new_dirent+0x73/0xdb [<c10cb829>] ? sysfs_add_file_mode+0x4c/0x88 [<c10cb873>] ? sysfs_add_file+0xe/0x13 [<c10cb905>] ? sysfs_create_file+0x20/0x22 [<f8116eb9>] ? applesmc_create_nodes+0xac/0xf1 [applesmc] [<f812b0b2>] ? applesmc_init+0xb2/0x1000 [applesmc] [<c100115e>] ? do_one_initcall+0x71/0x113 [<f812b000>] ? applesmc_init+0x0/0x1000 [applesmc] [<c1053d13>] ? sys_init_module+0xb3/0x1e2 [<c1002910>] ? sysenter_do_call+0x12/0x31 ---[ end trace f4dc91d2a456dccb ]--- BUG: key f42962fc not in .data! BUG: key f4296394 not in .data! BUG: key f42b7dac not in .data! BUG: key f42b7d14 not in .data! BUG: key f42b7c7c not in .data! BUG: key f42b7be4 not in .data! BUG: key f42b7b4c not in .data! BUG: key f42b7ab4 not in .data! BUG: key f42b7a1c not in .data! BUG: key f4296f74 not in .data! BUG: key f4296edc not in .data! BUG: key f4296e44 not in .data! BUG: key f4296dac not in .data! BUG: key f411adfc not in .data! BUG: key f411ae3c not in .data! BUG: key f411ae7c not in .data! BUG: key f411aebc not in .data! BUG: key f411aefc not in .data! BUG: key f411af3c not in .data! BUG: key f411af7c not in .data! BUG: key f4100dfc not in .data! BUG: key f4100e3c not in .data! BUG: key f4100e7c not in .data! BUG: key f4100ebc not in .data! BUG: key f4100efc not in .data! BUG: key f4100f3c not in .data! BUG: key f4100f7c not in .data! Any ideas where this may come from? -- Stefan Richter -=====-==-== ---= =-==- http://arcgraph.de/sr/ Linux version 2.6.38-rc2 (stefan@mini) (gcc version 4.3.4 (Gentoo 4.3.4 p1.0, pie-10.1.5) ) #2 SMP PREEMPT Sat Jan 22 13:15:45 CET 2011 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000ede00 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000007e0d5000 (usable) BIOS-e820: 000000007e0d5000 - 000000007e2d6000 (ACPI NVS) BIOS-e820: 000000007e2d6000 - 000000007eebf000 (ACPI data) BIOS-e820: 000000007eebf000 - 000000007eeef000 (ACPI NVS) BIOS-e820: 000000007eeef000 - 000000007ef00000 (ACPI data) BIOS-e820: 000000007ef00000 - 0000000080000000 (reserved) BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved) BIOS-e820: 00000000fed1c000 - 00000000fed20000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) BIOS-e820: 00000000ffe00000 - 0000000100000000 (reserved) Notice: NX (Execute Disable) protection cannot be enabled: non-PAE kernel! DMI 2.4 present. DMI: Mac-F4208EC8/Macmini1,1, BIOS MM11.88Z.0055.B08.0610121326 10/12/06 e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) e820 remove range: 00000000000a0000 - 0000000000100000 (usable) last_pfn = 0x7e0d5 max_arch_pfn = 0x100000 MTRR default type: uncachable MTRR fixed ranges enabled: 00000-9FFFF write-back A0000-BFFFF uncachable C0000-CFFFF write-protect D0000-DFFFF uncachable E0000-FFFFF write-protect MTRR variable ranges enabled: 0 base 0FFE00000 mask FFFE00000 write-protect 1 base 000000000 mask F80000000 write-back 2 base 07F000000 mask FFF000000 uncachable 3 base 07EF00000 mask FFFF00000 uncachable 4 disabled 5 disabled 6 disabled 7 disabled x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 initial memory mapped : 0 - 01c00000 init_memory_mapping: 0000000000000000-00000000377fe000 0000000000 - 00377fe000 page 4k kernel direct mapping tables up to 377fe000 @ 1b1f000-1c00000 ACPI: RSDP 000fe020 00024 (v02 APPLE ) ACPI: XSDT 7eefd120 00074 (v01 APPLE Apple00 00000055 01000013) ACPI: FACP 7eefb000 000F4 (v03 APPLE Apple00 00000055 Loki 0000005F) ACPI: DSDT 7eef1000 0389A (v01 APPLE Macmini 00010001 INTL 20050309) ACPI: FACS 7eec1000 00040 ACPI: HPET 7eefa000 00038 (v01 APPLE Apple00 00000001 Loki 0000005F) ACPI: APIC 7eef9000 00068 (v01 APPLE Apple00 00000001 Loki 0000005F) ACPI: MCFG 7eef8000 0003C (v01 APPLE Apple00 00000001 Loki 0000005F) ACPI: ASF! 7eef7000 0009C (v32 APPLE Apple00 00000001 Loki 0000005F) ACPI: SBST 7eef6000 00030 (v01 APPLE Apple00 00000001 Loki 0000005F) ACPI: ECDT 7eef5000 00053 (v01 APPLE Apple00 00000001 Loki 0000005F) ACPI: SSDT 7eebd000 0064F (v01 APPLE SataPri 00001000 INTL 20050309) ACPI: SSDT 7eebc000 0069C (v01 APPLE SataSec 00001000 INTL 20050309) ACPI: SSDT 7eef0000 004DC (v01 APPLE CpuPm 00003000 INTL 20050309) ACPI: Local APIC address 0xfee00000 1128MB HIGHMEM available. 887MB LOWMEM available. mapped low ram: 0 - 377fe000 low ram: 0 - 377fe000 Zone PFN ranges: DMA 0x00000010 -> 0x00001000 Normal 0x00001000 -> 0x000377fe HighMem 0x000377fe -> 0x0007e0d5 Movable zone start PFN for each node early_node_map[2] active PFN ranges 0: 0x00000010 -> 0x0000009f 0: 0x00000100 -> 0x0007e0d5 On node 0 totalpages: 516196 DMA zone: 32 pages used for memmap DMA zone: 0 pages reserved DMA zone: 3951 pages, LIFO batch:0 Normal zone: 1744 pages used for memmap Normal zone: 221486 pages, LIFO batch:31 HighMem zone: 2258 pages used for memmap HighMem zone: 286725 pages, LIFO batch:31 Using APIC driver default ACPI: PM-Timer IO Port: 0x408 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Using ACPI (MADT) for SMP configuration information ACPI: HPET id: 0x8086a201 base: 0xfed00000 SMP: Allowing 2 CPUs, 0 hotplug CPUs nr_irqs_gsi: 40 PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 PM: Registered nosave memory: 00000000000a0000 - 00000000000ee000 PM: Registered nosave memory: 00000000000ee000 - 0000000000100000 Allocating PCI resources starting at 80000000 (gap: 80000000:60000000) setup_percpu: NR_CPUS:2 nr_cpumask_bits:2 nr_cpu_ids:2 nr_node_ids:1 PERCPU: Embedded 12 pages/cpu @f6000000 s25216 r0 d23936 u2097152 pcpu-alloc: s25216 r0 d23936 u2097152 alloc=1*4194304 pcpu-alloc: [0] 0 1 Built 1 zonelists in Zone order, mobility grouping on. Total pages: 512162 Kernel command line: root=/dev/sda3 PID hash table entries: 4096 (order: 2, 16384 bytes) Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Initializing CPU#0 Initializing HighMem for node 0 (000377fe:0007e0d5) Memory: 2037440k/2065236k available (2497k kernel code, 27344k reserved, 1394k data, 336k init, 1155932k highmem) virtual kernel memory layout: fixmap : 0xfff8f000 - 0xfffff000 ( 448 kB) pkmap : 0xff800000 - 0xffc00000 (4096 kB) vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB) lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB) .init : 0xc13cd000 - 0xc1421000 ( 336 kB) .data : 0xc127066a - 0xc13ccf80 (1394 kB) .text : 0xc1000000 - 0xc127066a (2497 kB) Checking if this processor honours the WP bit even in supervisor mode...Ok. Preemptable hierarchical RCU implementation. RCU-based detection of stalled CPUs is disabled. Verbose stalled-CPUs detection is disabled. NR_IRQS:320 CPU 0 irqstacks, hard=f5c0a000 soft=f5c0c000 Extended CMOS year: 2000 Console: colour VGA+ 80x25 console [tty0] enabled Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar ... MAX_LOCKDEP_SUBCLASSES: 8 ... MAX_LOCK_DEPTH: 48 ... MAX_LOCKDEP_KEYS: 8191 ... CLASSHASH_SIZE: 4096 ... MAX_LOCKDEP_ENTRIES: 16384 ... MAX_LOCKDEP_CHAINS: 32768 ... CHAINHASH_SIZE: 16384 memory used by lock dependency info: 3551 kB per task-struct memory footprint: 1152 bytes ODEBUG: 5 of 5 active objects replaced hpet clockevent registered Fast TSC calibration using PIT Detected 2333.309 MHz processor. Calibrating delay loop (skipped), value calculated using timer frequency.. 4666.61 BogoMIPS (lpj=2333309) pid_max: default: 32768 minimum: 301 Mount-cache hash table entries: 512 CPU: Physical Processor ID: 0 CPU: Processor Core ID: 0 mce: CPU supports 6 MCE banks CPU0: Thermal monitoring enabled (TM2) using mwait in idle threads. ACPI: Core revision 20110112 Enabling APIC mode: Flat. Using 1 I/O APICs ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 CPU0: Intel(R) Core(TM)2 CPU T7600 @ 2.33GHz stepping 06 Performance Events: PEBS fmt0-, Core2 events, Intel PMU driver. PEBS disabled due to CPU errata. ... version: 2 ... bit width: 40 ... generic registers: 2 ... value mask: 000000ffffffffff ... max period: 000000007fffffff ... fixed-purpose events: 3 ... event mask: 0000000700000003 lockdep: fixing up alternatives. CPU 1 irqstacks, hard=f5d42000 soft=f5d44000 Booting Node 0, Processors #1 Ok. Initializing CPU#1 Brought up 2 CPUs Total of 2 processors activated (9333.03 BogoMIPS). NET: Registered protocol family 16 ACPI: bus type pci registered PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820 PCI: Using MMCONFIG for extended config space PCI: Using configuration type 1 for base access bio: create slab <bio-0> at 0 ACPI: EC: EC description table is found, configuring boot EC [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored ACPI: SSDT 7eebac90 0022A (v01 APPLE Cpu0Ist 00003000 INTL 20050309) ACPI: Dynamic OEM Table Load: ACPI: SSDT (null) 0022A (v01 APPLE Cpu0Ist 00003000 INTL 20050309) ACPI: SSDT 7eeb9e10 001BA (v01 APPLE Cpu0Cst 00003001 INTL 20050309) ACPI: Dynamic OEM Table Load: ACPI: SSDT (null) 001BA (v01 APPLE Cpu0Cst 00003001 INTL 20050309) ACPI: SSDT 7eebaf10 00087 (v01 APPLE Cpu1Ist 00003000 INTL 20050309) ACPI: Dynamic OEM Table Load: ACPI: SSDT (null) 00087 (v01 APPLE Cpu1Ist 00003000 INTL 20050309) ACPI: SSDT 7eeb8f10 00085 (v01 APPLE Cpu1Cst 00003000 INTL 20050309) ACPI: Dynamic OEM Table Load: ACPI: SSDT (null) 00085 (v01 APPLE Cpu1Cst 00003000 INTL 20050309) ACPI: Interpreter enabled ACPI: (supports S0 S3 S4 S5) ACPI: Using IOAPIC for interrupt routing ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62 ACPI: No dock devices found. PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7] (ignored) pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff] (ignored) pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored) pci_root PNP0A08:00: host bridge window [mem 0x80000000-0xfebfffff] (ignored) pci 0000:00:00.0: [8086:27a0] type 0 class 0x000600 pci 0000:00:02.0: [8086:27a2] type 0 class 0x000300 pci 0000:00:02.0: reg 10: [mem 0x90380000-0x903fffff] pci 0000:00:02.0: reg 14: [io 0x20f0-0x20f7] pci 0000:00:02.0: reg 18: [mem 0x80000000-0x8fffffff pref] pci 0000:00:02.0: reg 1c: [mem 0x90400000-0x9043ffff] pci 0000:00:07.0: [8086:27a3] type 0 class 0x001101 pci 0000:00:07.0: reg 10: [mem 0x90444000-0x90444fff] pci 0000:00:1b.0: [8086:27d8] type 0 class 0x000403 pci 0000:00:1b.0: reg 10: [mem 0x90440000-0x90443fff 64bit] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold pci 0000:00:1b.0: PME# disabled pci 0000:00:1c.0: [8086:27d0] type 1 class 0x000604 pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold pci 0000:00:1c.0: PME# disabled pci 0000:00:1c.1: [8086:27d2] type 1 class 0x000604 pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold pci 0000:00:1c.1: PME# disabled pci 0000:00:1d.0: [8086:27c8] type 0 class 0x000c03 pci 0000:00:1d.0: reg 20: [io 0x20a0-0x20bf] pci 0000:00:1d.1: [8086:27c9] type 0 class 0x000c03 pci 0000:00:1d.1: reg 20: [io 0x2080-0x209f] pci 0000:00:1d.2: [8086:27ca] type 0 class 0x000c03 pci 0000:00:1d.2: reg 20: [io 0x2060-0x207f] pci 0000:00:1d.3: [8086:27cb] type 0 class 0x000c03 pci 0000:00:1d.3: reg 20: [io 0x2040-0x205f] pci 0000:00:1d.7: [8086:27cc] type 0 class 0x000c03 pci 0000:00:1d.7: reg 10: [mem 0x90445400-0x904457ff] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold pci 0000:00:1d.7: PME# disabled pci 0000:00:1e.0: [8086:2448] type 1 class 0x000604 pci 0000:00:1f.0: [8086:27b9] type 0 class 0x000601 pci 0000:00:1f.0: quirk: [io 0x0400-0x047f] claimed by ICH6 ACPI/GPIO/TCO pci 0000:00:1f.0: quirk: [io 0x0500-0x053f] claimed by ICH6 GPIO pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0680 (mask 000f) pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 1640 (mask 000f) pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 4700 (mask 0003) pci 0000:00:1f.0: ICH7 LPC Generic IO decode 4 PIO at 0300 (mask 001f) pci 0000:00:1f.1: [8086:27df] type 0 class 0x000101 pci 0000:00:1f.1: reg 10: [io 0x20e8-0x20ef] pci 0000:00:1f.1: reg 14: [io 0x2104-0x2107] pci 0000:00:1f.1: reg 18: [io 0x20e0-0x20e7] pci 0000:00:1f.1: reg 1c: [io 0x2100-0x2103] pci 0000:00:1f.1: reg 20: [io 0x20c0-0x20cf] pci 0000:00:1f.2: [8086:27c4] type 0 class 0x000101 pci 0000:00:1f.2: reg 10: [io 0x20d8-0x20df] pci 0000:00:1f.2: reg 14: [io 0x20fc-0x20ff] pci 0000:00:1f.2: reg 18: [io 0x20d0-0x20d7] pci 0000:00:1f.2: reg 1c: [io 0x20f8-0x20fb] pci 0000:00:1f.2: reg 20: [io 0x2020-0x202f] pci 0000:00:1f.2: reg 24: [mem 0x90445000-0x904453ff] pci 0000:00:1f.2: PME# supported from D3hot pci 0000:00:1f.2: PME# disabled pci 0000:00:1f.3: [8086:27da] type 0 class 0x000c05 pci 0000:00:1f.3: reg 20: [io 0xefa0-0xefbf] pci 0000:01:00.0: [11ab:4362] type 0 class 0x000200 pci 0000:01:00.0: reg 10: [mem 0x90200000-0x90203fff 64bit] pci 0000:01:00.0: reg 18: [io 0x1000-0x10ff] pci 0000:01:00.0: reg 30: [mem 0xfffe0000-0xffffffff pref] pci 0000:01:00.0: supports D1 D2 pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:01:00.0: PME# disabled pci 0000:01:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' pci 0000:00:1c.0: PCI bridge to [bus 01-01] pci 0000:00:1c.0: bridge window [io 0x1000-0x1fff] pci 0000:00:1c.0: bridge window [mem 0x90200000-0x902fffff] pci 0000:00:1c.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) pci 0000:02:00.0: [168c:001c] type 0 class 0x000200 pci 0000:02:00.0: reg 10: [mem 0x90100000-0x9010ffff 64bit] pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' pci 0000:00:1c.1: PCI bridge to [bus 02-02] pci 0000:00:1c.1: bridge window [io 0xf000-0x0000] (disabled) pci 0000:00:1c.1: bridge window [mem 0x90100000-0x901fffff] pci 0000:00:1c.1: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) pci 0000:03:03.0: [11c1:5811] type 0 class 0x000c00 pci 0000:03:03.0: reg 10: [mem 0x90000000-0x90000fff] pci 0000:03:03.0: supports D1 D2 pci 0000:03:03.0: PME# supported from D0 D1 D2 D3hot pci 0000:03:03.0: PME# disabled pci 0000:00:1e.0: PCI bridge to [bus 03-03] (subtractive decode) pci 0000:00:1e.0: bridge window [io 0xf000-0x0000] (disabled) pci 0000:00:1e.0: bridge window [mem 0x90000000-0x900fffff] pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) pci 0000:00:1e.0: bridge window [io 0x0000-0xffff] (subtractive decode) pci 0000:00:1e.0: bridge window [mem 0x00000000-0xffffffff] (subtractive decode) pci_bus 0000:00: on NUMA node 0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 *10 12 14 15) ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 *11 12 14 15) ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 12 14 15) *11 ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 *11 12 14 15) ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 10 12 14 15) *11 ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *11 12 14 15) vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none vgaarb: loaded SCSI subsystem initialized libata version 3.00 loaded. usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb PCI: Using ACPI for IRQ routing PCI: pci_cache_line_size set to 64 bytes reserve RAM buffer: 000000000009fc00 - 000000000009ffff reserve RAM buffer: 000000007e0d5000 - 000000007fffffff Switching to clocksource hpet pnp: PnP ACPI init ACPI: bus type pnp registered pnp 00:00: [bus 00-ff] pnp 00:00: [io 0x0000-0x0cf7 window] pnp 00:00: [io 0x0cf8-0x0cff] pnp 00:00: [io 0x0d00-0xffff window] pnp 00:00: [mem 0x000a0000-0x000bffff window] pnp 00:00: [mem 0x000c0000-0x000c3fff window] pnp 00:00: [mem 0x000c4000-0x000c7fff window] pnp 00:00: [mem 0x000c8000-0x000cbfff window] pnp 00:00: [mem 0x000cc000-0x000cffff window] pnp 00:00: [mem 0x000d0000-0x000d3fff window] pnp 00:00: [mem 0x000d4000-0x000d7fff window] pnp 00:00: [mem 0x000d8000-0x000dbfff window] pnp 00:00: [mem 0x000dc000-0x000dffff window] pnp 00:00: [mem 0x000e0000-0x000e3fff window] pnp 00:00: [mem 0x000e4000-0x000e7fff window] pnp 00:00: [mem 0x000e8000-0x000ebfff window] pnp 00:00: [mem 0x000ec000-0x000effff window] pnp 00:00: [mem 0x000f0000-0x000fffff window] pnp 00:00: [mem 0x80000000-0xfebfffff window] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active) pnp 00:01: [mem 0xe0000000-0xefffffff] pnp 00:01: [mem 0xfed14000-0xfed17fff] pnp 00:01: [mem 0xfed18000-0xfed18fff] pnp 00:01: [mem 0xfed19000-0xfed19fff] pnp 00:01: [mem 0xfed1c000-0xfed1ffff] pnp 00:01: [mem 0xfed20000-0xfed8ffff] system 00:01: [mem 0xe0000000-0xefffffff] has been reserved system 00:01: [mem 0xfed14000-0xfed17fff] has been reserved system 00:01: [mem 0xfed18000-0xfed18fff] has been reserved system 00:01: [mem 0xfed19000-0xfed19fff] has been reserved system 00:01: [mem 0xfed1c000-0xfed1ffff] has been reserved system 00:01: [mem 0xfed20000-0xfed8ffff] has been reserved system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active) pnp 00:02: [io 0x0300-0x031f] pnp 00:02: [irq 6] pnp 00:02: Plug and Play ACPI device, IDs APP0001 (active) pnp 00:03: [io 0x004e-0x004f] pnp 00:03: [io 0x4700-0x470b] pnp 00:03: Plug and Play ACPI device, IDs IFX0101 (active) pnp 00:04: [io 0x0000-0x001f] pnp 00:04: [io 0x0081-0x0091] pnp 00:04: [io 0x0093-0x009f] pnp 00:04: [io 0x00c0-0x00df] pnp 00:04: [dma 4] pnp 00:04: Plug and Play ACPI device, IDs PNP0200 (active) pnp 00:05: [mem 0xff000000-0xffffffff] pnp 00:05: Plug and Play ACPI device, IDs INT0800 (active) pnp 00:06: [irq 0 disabled] pnp 00:06: [irq 8] pnp 00:06: [mem 0xfed00000-0xfed003ff] system 00:06: [mem 0xfed00000-0xfed003ff] has been reserved system 00:06: Plug and Play ACPI device, IDs PNP0103 PNP0c01 (active) pnp 00:07: [io 0x00f0] pnp 00:07: [irq 13] pnp 00:07: Plug and Play ACPI device, IDs PNP0c04 (active) pnp 00:08: [io 0x002e-0x002f] pnp 00:08: [io 0x004e-0x004f] pnp 00:08: [io 0x0061] pnp 00:08: [io 0x0063] pnp 00:08: [io 0x0065] pnp 00:08: [io 0x0067] pnp 00:08: [io 0x0070] pnp 00:08: [io 0x0080] pnp 00:08: [io 0x0092] pnp 00:08: [io 0x00b2-0x00b3] pnp 00:08: [io 0x0680-0x06ef] pnp 00:08: [io 0x0800-0x080f] pnp 00:08: [io 0x0810-0x0817] pnp 00:08: [io 0x0400-0x047f] pnp 00:08: [io 0x0500-0x053f] pnp 00:08: [io 0x1640-0x164f] pnp 00:08: disabling [io 0x1640-0x164f] because it overlaps 0000:00:1c.0 BAR 7 [io 0x1000-0x1fff] system 00:08: [io 0x0680-0x06ef] has been reserved system 00:08: [io 0x0800-0x080f] has been reserved system 00:08: [io 0x0810-0x0817] has been reserved system 00:08: [io 0x0400-0x047f] has been reserved system 00:08: [io 0x0500-0x053f] has been reserved system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active) pnp 00:09: [io 0x0070-0x0077] pnp 00:09: Plug and Play ACPI device, IDs PNP0b00 (active) pnp: PnP ACPI: found 10 devices ACPI: ACPI bus type pnp unregistered pci 0000:01:00.0: no compatible bridge window for [mem 0xfffe0000-0xffffffff pref] pci 0000:00:1c.0: BAR 9: assigned [mem 0x90500000-0x906fffff pref] pci 0000:00:1c.1: BAR 9: assigned [mem 0x90700000-0x908fffff 64bit pref] pci 0000:00:1c.1: BAR 7: assigned [io 0x3000-0x3fff] pci 0000:01:00.0: BAR 6: assigned [mem 0x90500000-0x9051ffff pref] pci 0000:00:1c.0: PCI bridge to [bus 01-01] pci 0000:00:1c.0: bridge window [io 0x1000-0x1fff] pci 0000:00:1c.0: bridge window [mem 0x90200000-0x902fffff] pci 0000:00:1c.0: bridge window [mem 0x90500000-0x906fffff pref] pci 0000:00:1c.1: PCI bridge to [bus 02-02] pci 0000:00:1c.1: bridge window [io 0x3000-0x3fff] pci 0000:00:1c.1: bridge window [mem 0x90100000-0x901fffff] pci 0000:00:1c.1: bridge window [mem 0x90700000-0x908fffff 64bit pref] pci 0000:00:1e.0: PCI bridge to [bus 03-03] pci 0000:00:1e.0: bridge window [io disabled] pci 0000:00:1e.0: bridge window [mem 0x90000000-0x900fffff] pci 0000:00:1e.0: bridge window [mem pref disabled] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 pci 0000:00:1c.0: setting latency timer to 64 pci 0000:00:1c.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16 pci 0000:00:1c.1: setting latency timer to 64 pci 0000:00:1e.0: power state changed by ACPI to D0 pci 0000:00:1e.0: power state changed by ACPI to D0 pci 0000:00:1e.0: setting latency timer to 64 pci_bus 0000:00: resource 0 [io 0x0000-0xffff] pci_bus 0000:00: resource 1 [mem 0x00000000-0xffffffff] pci_bus 0000:01: resource 0 [io 0x1000-0x1fff] pci_bus 0000:01: resource 1 [mem 0x90200000-0x902fffff] pci_bus 0000:01: resource 2 [mem 0x90500000-0x906fffff pref] pci_bus 0000:02: resource 0 [io 0x3000-0x3fff] pci_bus 0000:02: resource 1 [mem 0x90100000-0x901fffff] pci_bus 0000:02: resource 2 [mem 0x90700000-0x908fffff 64bit pref] pci_bus 0000:03: resource 1 [mem 0x90000000-0x900fffff] pci_bus 0000:03: resource 4 [io 0x0000-0xffff] pci_bus 0000:03: resource 5 [mem 0x00000000-0xffffffff] NET: Registered protocol family 2 IP route cache hash table entries: 32768 (order: 5, 131072 bytes) TCP established hash table entries: 131072 (order: 8, 1048576 bytes) TCP bind hash table entries: 65536 (order: 9, 2359296 bytes) TCP: Hash tables configured (established 131072 bind 65536) TCP reno registered UDP hash table entries: 512 (order: 3, 40960 bytes) UDP-Lite hash table entries: 512 (order: 3, 40960 bytes) NET: Registered protocol family 1 pci 0000:00:02.0: Boot video device PCI: CLS mismatch (256 != 64), using 64 bytes DMA-API: preallocated 32768 debug entries DMA-API: debugging enabled by kernel config highmem bounce pool size: 64 pages msgmni has been set to 1721 io scheduler noop registered io scheduler deadline registered io scheduler cfq registered (default) pcieport 0000:00:1c.0: setting latency timer to 64 pcieport 0000:00:1c.1: setting latency timer to 64 intel_idle: MWAIT substates: 0x22220 intel_idle: does not run on family 6 model 15 input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0 ACPI: Power Button [PWRB] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 ACPI: Power Button [PWRF] ACPI: acpi_idle registered with cpuidle Monitor-Mwait will be used to enter C-1 state Monitor-Mwait will be used to enter C-2 state Marking TSC unstable due to TSC halts in idle Linux agpgart interface v0.103 agpgart-intel 0000:00:00.0: Intel 945GM Chipset agpgart-intel 0000:00:00.0: detected gtt size: 262144K total, 262144K mappable agpgart-intel 0000:00:00.0: detected 16384K stolen memory agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0x80000000 [drm] Initialized drm 1.1.0 20060810 i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 i915 0000:00:02.0: setting latency timer to 64 [drm] Supports vblank timestamp caching Rev 1 (10.10.2010). [drm] Driver supports precise vblank timestamp query. vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem [drm] initialized overlay support Console: switching to colour frame buffer device 210x65 fb0: inteldrmfb frame buffer device drm: registered panic notifier [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0 loop: module loaded ata_piix 0000:00:1f.1: version 2.13 ata_piix 0000:00:1f.1: power state changed by ACPI to D0 ata_piix 0000:00:1f.1: power state changed by ACPI to D0 ata_piix 0000:00:1f.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18 ata_piix 0000:00:1f.1: setting latency timer to 64 scsi0 : ata_piix scsi1 : ata_piix ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x20c0 irq 14 ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x20c8 irq 15 ata_piix 0000:00:1f.2: enabling device (0005 -> 0007) ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19 ata_piix 0000:00:1f.2: MAP [ P0 P2 -- -- ] ata_piix 0000:00:1f.2: setting latency timer to 64 ata1.00: ATAPI: MATSHITACD-RW CW-8124, DACH, max UDMA/33 scsi2 : ata_piix scsi3 : ata_piix ata3: SATA max UDMA/133 cmd 0x20d8 ctl 0x20fc bmdma 0x2020 irq 19 ata4: SATA max UDMA/133 cmd 0x20d0 ctl 0x20f8 bmdma 0x2028 irq 19 ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 21 (level, low) -> IRQ 21 ehci_hcd 0000:00:1d.7: setting latency timer to 64 ehci_hcd 0000:00:1d.7: EHCI Host Controller ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1 ata1.00: configured for UDMA/33 ehci_hcd 0000:00:1d.7: using broken periodic workaround ehci_hcd 0000:00:1d.7: debug port 1 ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported ehci_hcd 0000:00:1d.7: irq 21, io mem 0x90445400 ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 hub 1-0:1.0: USB hub found hub 1-0:1.0: 8 ports detected uhci_hcd: USB Universal Host Controller Interface driver uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21 uhci_hcd 0000:00:1d.0: setting latency timer to 64 uhci_hcd 0000:00:1d.0: UHCI Host Controller uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 scsi 0:0:0:0: CD-ROM MATSHITA CD-RW CW-8124 DACH PQ: 0 ANSI: 5 uhci_hcd 0000:00:1d.0: irq 21, io base 0x000020a0 hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 uhci_hcd 0000:00:1d.1: setting latency timer to 64 uhci_hcd 0000:00:1d.1: UHCI Host Controller uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 uhci_hcd 0000:00:1d.1: irq 19, io base 0x00002080 hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 uhci_hcd 0000:00:1d.2: setting latency timer to 64 uhci_hcd 0000:00:1d.2: UHCI Host Controller uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 uhci_hcd 0000:00:1d.2: irq 18, io base 0x00002060 hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16 uhci_hcd 0000:00:1d.3: setting latency timer to 64 uhci_hcd 0000:00:1d.3: UHCI Host Controller uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5 uhci_hcd 0000:00:1d.3: irq 16, io base 0x00002040 hub 5-0:1.0: USB hub found hub 5-0:1.0: 2 ports detected i8042: PNP: No PS/2 controller found. Probing ports directly. i8042: No controller found mousedev: PS/2 mouse device common for all mice cpuidle: using governor ladder cpuidle: using governor menu usbcore: registered new interface driver usbhid usbhid: USB HID core driver TCP cubic registered NET: Registered protocol family 17 Using IPI No-Shortcut mode ata3.01: ATA-7: STT_FTM28GX25H, 1571, max UDMA/133 ata3.01: 250069680 sectors, multi 1: LBA48 NCQ (depth 0/32) ata3.01: configured for UDMA/133 scsi 2:0:1:0: Direct-Access ATA STT_FTM28GX25H 1571 PQ: 0 ANSI: 5 sd 2:0:1:0: [sda] 250069680 512-byte logical blocks: (128 GB/119 GiB) sd 2:0:1:0: [sda] Write Protect is off sd 2:0:1:0: [sda] Mode Sense: 00 3a 00 00 sd 2:0:1:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sda: sda1 sda2 sda3 sda4 sd 2:0:1:0: [sda] Attached SCSI disk EXT3-fs: barriers not enabled kjournald starting. Commit interval 5 seconds EXT3-fs (sda3): mounted filesystem with writeback data mode VFS: Mounted root (ext3 filesystem) readonly on device 8:3. debug: unmapping init memory c13cd000..c1421000 Write protecting the kernel text: 2500k Write protecting the kernel read-only data: 1152k udev: starting version 151 udevd (678): /proc/678/oom_adj is deprecated, please use /proc/678/oom_score_adj instead. usb 3-1: new full speed USB device using uhci_hcd and address 2 sky2: driver version 1.28 sky2 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 sky2 0000:01:00.0: setting latency timer to 64 sky2 0000:01:00.0: Yukon-2 EC chip revision 2 sky2 0000:01:00.0: eth0: addr 00:16:cb:a7:02:56 i801_smbus 0000:00:1f.3: PCI INT B -> GSI 19 (level, low) -> IRQ 19 ACPI: resource 0000:00:1f.3 [io 0xefa0-0xefbf] conflicts with ACPI region SMBI [io 0xefa0-0xefaf] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver sr 0:0:0:0: Attached scsi generic sg0 type 5 sd 2:0:1:0: Attached scsi generic sg1 type 0 sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray cdrom: Uniform CD-ROM driver Revision: 3.20 sr 0:0:0:0: Attached scsi CD-ROM sr0 Real Time Clock Driver v1.12b input: Logitech USB Gaming Mouse as /devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1:1.0/input/input2 generic-usb 0003:046D:C042.0001: input: USB HID v1.11 Mouse [Logitech USB Gaming Mouse] on usb-0000:00:1d.1-1/input0 generic-usb 0003:046D:C042.0002: claimed by neither input, hiddev nor hidraw applesmc: F0Mn: read arg fail HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 HDA Intel 0000:00:1b.0: setting latency timer to 64 hda_codec: STAC922x, Apple subsys_id=106b0800 applesmc: key=137 fan=1 temp=7 acc=0 lux=0 kbd=0 applesmc: init_smcreg() took 50 ms BUG: key f4891a1c not in .data! ------------[ cut here ]------------ WARNING: at kernel/lockdep.c:2701 lockdep_init_map+0xd8/0x442() Hardware name: Macmini1,1 Modules linked in: snd_hda_codec_idt snd_hda_intel snd_hda_codec applesmc(+) input_polldev snd_pcm rtc snd_timer i2c_i801 sg sr_mod cdrom snd sky2 snd_page_alloc Pid: 763, comm: modprobe Not tainted 2.6.38-rc2 #2 Call Trace: [<c1029b5b>] ? warn_slowpath_common+0x60/0x75 [<c1029b7f>] ? warn_slowpath_null+0xf/0x13 [<c104a15a>] ? lockdep_init_map+0xd8/0x442 [<c10cbea1>] ? sysfs_new_dirent+0x73/0xdb [<c10cb829>] ? sysfs_add_file_mode+0x4c/0x88 [<c10cb873>] ? sysfs_add_file+0xe/0x13 [<c10cb905>] ? sysfs_create_file+0x20/0x22 [<f8116eb9>] ? applesmc_create_nodes+0xac/0xf1 [applesmc] [<f812b0b2>] ? applesmc_init+0xb2/0x1000 [applesmc] [<c100115e>] ? do_one_initcall+0x71/0x113 [<f812b000>] ? applesmc_init+0x0/0x1000 [applesmc] [<c1053d13>] ? sys_init_module+0xb3/0x1e2 [<c1002910>] ? sysenter_do_call+0x12/0x31 ---[ end trace f4dc91d2a456dccb ]--- BUG: key f42962fc not in .data! BUG: key f4296394 not in .data! BUG: key f42b7dac not in .data! BUG: key f42b7d14 not in .data! BUG: key f42b7c7c not in .data! BUG: key f42b7be4 not in .data! BUG: key f42b7b4c not in .data! BUG: key f42b7ab4 not in .data! BUG: key f42b7a1c not in .data! BUG: key f4296f74 not in .data! BUG: key f4296edc not in .data! BUG: key f4296e44 not in .data! BUG: key f4296dac not in .data! BUG: key f411adfc not in .data! BUG: key f411ae3c not in .data! BUG: key f411ae7c not in .data! BUG: key f411aebc not in .data! BUG: key f411aefc not in .data! BUG: key f411af3c not in .data! usb 4-1: new low speed USB device using uhci_hcd and address 2 BUG: key f411af7c not in .data! BUG: key f4100dfc not in .data! BUG: key f4100e3c not in .data! BUG: key f4100e7c not in .data! BUG: key f4100ebc not in .data! BUG: key f4100efc not in .data! BUG: key f4100f3c not in .data! BUG: key f4100f7c not in .data! input: USB keyboard as /devices/pci0000:00/0000:00:1d.2/usb4/4-1/4-1:1.0/input/input3 generic-usb 0003:0DC6:3412.0003: input: USB HID v1.00 Keyboard [USB keyboard] on usb-0000:00:1d.2-1/input0 input: USB keyboard as /devices/pci0000:00/0000:00:1d.2/usb4/4-1/4-1:1.1/input/input4 generic-usb 0003:0DC6:3412.0004: input: USB HID v1.00 Mouse [USB keyboard] on usb-0000:00:1d.2-1/input1 usb 5-1: new full speed USB device using uhci_hcd and address 2 EXT3-fs (sda3): using internal journal input: HID 05ac:1000 as /devices/pci0000:00/0000:00:1d.3/usb5/5-1/5-1:1.0/input/input5 generic-usb 0003:05AC:1000.0005: input: USB HID v1.11 Keyboard [HID 05ac:1000] on usb-0000:00:1d.3-1/input0 input: HID 05ac:1000 as /devices/pci0000:00/0000:00:1d.3/usb5/5-1/5-1:1.1/input/input6 generic-usb 0003:05AC:1000.0006: input: USB HID v1.11 Mouse [HID 05ac:1000] on usb-0000:00:1d.3-1/input1 ata3.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 ata3.01: BMDMA stat 0x5 ata3.01: failed command: DATA SET MANAGEMENT ata3.01: cmd 06/01:01:00:00:00/00:00:00:00:00/b0 tag 0 dma 512 out res 51/04:01:00:00:00/04:00:00:00:00/b0 Emask 0x1 (device error) ata3.01: status: { DRDY ERR } ata3.01: error: { ABRT } ata3.01: device reported invalid CHS sector 0 sd 2:0:1:0: [sda] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE sd 2:0:1:0: [sda] Sense Key : Aborted Command [current] [descriptor] Descriptor sense data with sense descriptors (in hex): 72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00 00 00 00 00 sd 2:0:1:0: [sda] Add. Sense: No additional sense information sd 2:0:1:0: [sda] CDB: Write same(16): 93 08 00 00 00 00 0e 8b c2 90 00 3f ff c0 00 00 end_request: I/O error, dev sda, sector 244040336 Adding 2883580k swap on /dev/sda4. Priority:-1 extents:1 across:2883580k SS usb 5-2: new full speed USB device using uhci_hcd and address 3 generic-usb 0003:05AC:8240.0007: claimed by neither input, hiddev nor hidraw usb 5-1: usbfs: USBDEVFS_CONTROL failed cmd hid2hci rqt 64 rq 0 len 0 ret -84 usb 5-1: USB disconnect, address 2 usb 5-1: new full speed USB device using uhci_hcd and address 4 sky2 0000:01:00.0: eth0: enabling interface sky2 0000:01:00.0: eth0: Link is up at 100 Mbps, full duplex, flow control both RPC: Registered udp transport module. RPC: Registered tcp transport module. RPC: Registered tcp NFSv4.1 backchannel transport module. _______________________________________________ lm-sensors mailing list lm-sensors@xxxxxxxxxxxxxx http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
