On Tue, 21 Dec 2010 18:52:50 +0100 dd diasemi wrote: Hi, Please include a "diffstat" with your patches, as described in Documentation/SubmittingPatches, so we can easily see what files are being added or modified. > HWMON module for DA9052 PMIC device from Dialog Semiconductor. > > Changes made since last submission: > . removed the DA9052 customized success and error codes > . changed da9052_manual_read() return type > > Linux Kernel Version: 2.6.34 Kernel patches should be made to the latest version (but maybe it doesn't matter in some cases). > > Signed-off-by: D. Chen <dchen@xxxxxxxxxxx> > --- You probably didn't mean to submit all of these changes to this Kconfig file ?? Did you look at this patch? > diff -Naur linux-2.6.34-orig2/drivers/hwmon/Kconfig > linux-2.6.34/drivers/hwmon/Kconfig > --- linux-2.6.34-orig2/drivers/hwmon/Kconfig 2010-10-12 17:00:39.000000000 +0500 > +++ linux-2.6.34/drivers/hwmon/Kconfig 2010-10-12 14:15:56.000000000 +0500 > @@ -28,17 +28,6 @@ > tristate > default n > > -config HWMON_DEBUG_CHIP > - bool "Hardware Monitoring Chip debugging messages" > - default n > - help > - Say Y here if you want the I2C chip drivers to produce a bunch of > - debug messages to the system log. Select this if you are having > - a problem with I2C support and want to see more of what is going > - on. > - > -comment "Native drivers" > - > config SENSORS_ABITUGURU > tristate "Abit uGuru (rev 1 & 2)" > depends on X86 && EXPERIMENTAL > @@ -170,16 +159,6 @@ > This driver can also be built as a module. If so, the module > will be called adm9240. > > -config SENSORS_ADT7411 > - tristate "Analog Devices ADT7411" > - depends on I2C && EXPERIMENTAL > - help > - If you say yes here you get support for the Analog Devices > - ADT7411 voltage and temperature monitoring chip. > - > - This driver can also be built as a module. If so, the module > - will be called adt7411. > - > config SENSORS_ADT7462 > tristate "Analog Devices ADT7462" > depends on I2C && EXPERIMENTAL > @@ -200,30 +179,15 @@ > This driver can also be built as a module. If so, the module > will be called adt7470. > > -config SENSORS_ADT7475 > - tristate "Analog Devices ADT7473, ADT7475, ADT7476 and ADT7490" > +config SENSORS_ADT7473 > + tristate "Analog Devices ADT7473" > depends on I2C && EXPERIMENTAL > - select HWMON_VID > help > If you say yes here you get support for the Analog Devices > - ADT7473, ADT7475, ADT7476 and ADT7490 hardware monitoring > - chips. > + ADT7473 temperature monitoring chips. > > - This driver can also be build as a module. If so, the module > - will be called adt7475. > - > -config SENSORS_ASC7621 > - tristate "Andigilog aSC7621" > - depends on HWMON && I2C > - help > - If you say yes here you get support for the aSC7621 > - family of SMBus sensors chip found on most Intel X38, X48, X58, > - 945, 965 and 975 desktop boards. Currently supported chips: > - aSC7621 > - aSC7621a > - > - This driver can also be built as a module. If so, the module > - will be called asc7621. > + This driver can also be built as a module. If so, the module > + will be called adt7473. > > config SENSORS_K8TEMP > tristate "AMD Athlon64/FX or Opteron temperature sensor" > @@ -237,18 +201,6 @@ > This driver can also be built as a module. If so, the module > will be called k8temp. > > -config SENSORS_K10TEMP > - tristate "AMD Phenom/Sempron/Turion/Opteron temperature sensor" > - depends on X86 && PCI > - help > - If you say yes here you get support for the temperature > - sensor(s) inside your CPU. Supported are later revisions of > - the AMD Family 10h and all revisions of the AMD Family 11h > - microarchitectures. > - > - This driver can also be built as a module. If so, the module > - will be called k10temp. > - > config SENSORS_AMS > tristate "Apple Motion Sensor driver" > depends on PPC_PMAC && !PPC64 && INPUT && ((ADB_PMU && I2C = y) || > (ADB_PMU && !I2C) || I2C) && EXPERIMENTAL > @@ -300,6 +252,13 @@ > This driver can also be built as a module. If so, the module > will be called atxp1. > > +config SENSORS_DA9052 > + tristate "Dialog DA9052 HWMon" > + depends on PMIC_DA9052 > + help > + Say y here to support the ADC found on > + Dialog Semiconductor DA9052 PMIC. > + > config SENSORS_DS1621 > tristate "Dallas Semiconductor DS1621 and DS1625" > depends on I2C > @@ -332,12 +291,11 @@ > will be called f71805f. > > config SENSORS_F71882FG > - tristate "Fintek F71858FG, F71862FG, F71882FG, F71889FG and F8000" > + tristate "Fintek F71882FG and F71883FG" > depends on EXPERIMENTAL > help > If you say yes here you get support for hardware monitoring > - features of the Fintek F71858FG, F71862FG/71863FG, F71882FG/F71883FG, > - F71889FG and F8000 Super-I/O chips. > + features of the Fintek F71882FG and F71883FG Super-I/O chips. > > This driver can also be built as a module. If so, the module > will be called f71882fg. > @@ -352,31 +310,39 @@ > This driver can also be built as a module. If so, the module > will be called f75375s. > > -config SENSORS_FSCHMD > - tristate "Fujitsu Siemens Computers sensor chips" > +config SENSORS_FSCHER > + tristate "FSC Hermes" > depends on X86 && I2C > help > - If you say yes here you get support for the following Fujitsu > - Siemens Computers (FSC) sensor chips: Poseidon, Scylla, Hermes, > - Heimdall, Heracles, Hades and Syleus including support for the > - integrated watchdog. > + If you say yes here you get support for Fujitsu Siemens > + Computers Hermes sensor chips. > > - This is a merged driver for FSC sensor chips replacing the fscpos, > - fscscy and fscher drivers and adding support for several other FSC > - sensor chips. > + This driver can also be built as a module. If so, the module > + will be called fscher. > + > +config SENSORS_FSCPOS > + tristate "FSC Poseidon" > + depends on X86 && I2C > + help > + If you say yes here you get support for Fujitsu Siemens > + Computers Poseidon sensor chips. > > This driver can also be built as a module. If so, the module > - will be called fschmd. > + will be called fscpos. > > -config SENSORS_G760A > - tristate "GMT G760A" > - depends on I2C > +config SENSORS_FSCHMD > + tristate "FSC Poseidon, Scylla, Hermes, Heimdall and Heracles" > + depends on X86 && I2C && EXPERIMENTAL > help > - If you say yes here you get support for Global Mixed-mode > - Technology Inc G760A fan speed PWM controller chips. > + If you say yes here you get support for various Fujitsu Siemens > + Computers sensor chips. > + > + This is a new merged driver for FSC sensor chips which is intended > + as a replacment for the fscpos, fscscy and fscher drivers and adds > + support for several other FCS sensor chips. > > This driver can also be built as a module. If so, the module > - will be called g760a. > + will be called fschmd. > > config SENSORS_GL518SM > tristate "Genesys Logic GL518SM" > @@ -400,12 +366,12 @@ > will be called gl520sm. > > config SENSORS_CORETEMP > - tristate "Intel Core/Core2/Atom temperature sensor" > - depends on X86 && PCI && EXPERIMENTAL > + tristate "Intel Core (2) Duo/Solo temperature sensor" > + depends on X86 && EXPERIMENTAL > help > If you say yes here you get support for the temperature > - sensor inside your CPU. Most of the family 6 CPUs > - are supported. Check documentation/driver for details. > + sensor inside your CPU. Supported all are all known variants > + of Intel Core family. > > config SENSORS_IBMAEM > tristate "IBM Active Energy Manager temperature/power sensors and control" > @@ -416,7 +382,7 @@ > power sensors and capping hardware in various IBM System X > servers that support Active Energy Manager. This includes > the x3350, x3550, x3650, x3655, x3755, x3850 M2, x3950 M2, > - and certain HC10/HS2x/LS2x/QS2x blades. > + and certain HS2x/LS2x/QS2x blades. > > This driver can also be built as a module. If so, the module > will be called ibmaem. > @@ -440,8 +406,7 @@ > select HWMON_VID > help > If you say yes here you get support for ITE IT8705F, IT8712F, > - IT8716F, IT8718F, IT8720F and IT8726F sensor chips, and the > - SiS960 clone. > + IT8716F, IT8718F and IT8726F sensor chips, and the SiS960 clone. > > This driver can also be built as a module. If so, the module > will be called it87. > @@ -459,25 +424,15 @@ > will be called lm63. > > config SENSORS_LM70 > - tristate "National Semiconductor LM70 / Texas Instruments TMP121" > + tristate "National Semiconductor LM70" > depends on SPI_MASTER && EXPERIMENTAL > help > If you say yes here you get support for the National Semiconductor > - LM70 and Texas Instruments TMP121/TMP123 digital temperature > - sensor chips. > + LM70 digital temperature sensor chip. > > This driver can also be built as a module. If so, the module > will be called lm70. > > -config SENSORS_LM73 > - tristate "National Semiconductor LM73" > - depends on I2C > - help > - If you say yes here you get support for National Semiconductor LM73 > - sensor chips. > - This driver can also be built as a module. If so, the module > - will be called lm73. > - > config SENSORS_LM75 > tristate "National Semiconductor LM75 and compatibles" > depends on I2C > @@ -572,10 +527,9 @@ > depends on I2C > help > If you say yes here you get support for National Semiconductor LM90, > - LM86, LM89 and LM99, Analog Devices ADM1032 and ADT7461, Maxim > - MAX6646, MAX6647, MAX6648, MAX6649, MAX6657, MAX6658, MAX6659, > - MAX6680, MAX6681 and MAX6692, and Winbond/Nuvoton W83L771AWG/ASG > - sensor chips. > + LM86, LM89 and LM99, Analog Devices ADM1032 and ADT7461, and Maxim > + MAX6646, MAX6647, MAX6649, MAX6657, MAX6658, MAX6659, MAX6680 and > + MAX6681 sensor chips. > > This driver can also be built as a module. If so, the module > will be called lm90. > @@ -601,37 +555,6 @@ > This driver can also be built as a module. If so, the module > will be called lm93. > > -config SENSORS_LTC4215 > - tristate "Linear Technology LTC4215" > - depends on I2C && EXPERIMENTAL > - default n > - help > - If you say yes here you get support for Linear Technology LTC4215 > - Hot Swap Controller I2C interface. > - > - This driver can also be built as a module. If so, the module will > - be called ltc4215. > - > -config SENSORS_LTC4245 > - tristate "Linear Technology LTC4245" > - depends on I2C && EXPERIMENTAL > - default n > - help > - If you say yes here you get support for Linear Technology LTC4245 > - Multiple Supply Hot Swap Controller I2C interface. > - > - This driver can also be built as a module. If so, the module will > - be called ltc4245. > - > -config SENSORS_LM95241 > - tristate "National Semiconductor LM95241 sensor chip" > - depends on I2C > - help > - If you say yes here you get support for LM95241 sensor chip. > - > - This driver can also be built as a module. If so, the module > - will be called lm95241. > - > config SENSORS_MAX1111 > tristate "Maxim MAX1111 Multichannel, Serial 8-bit ADC chip" > depends on SPI_MASTER > @@ -686,47 +609,6 @@ > This driver can also be built as a module. If so, the module > will be called pc87427. > > -config SENSORS_PCF8591 > - tristate "Philips PCF8591 ADC/DAC" > - depends on I2C > - default n > - help > - If you say yes here you get support for Philips PCF8591 4-channel > - ADC, 1-channel DAC chips. > - > - This driver can also be built as a module. If so, the module > - will be called pcf8591. > - > - These devices are hard to detect and rarely found on mainstream > - hardware. If unsure, say N. > - > -config SENSORS_SHT15 > - tristate "Sensiron humidity and temperature sensors. SHT15 and compat." > - depends on GENERIC_GPIO > - help > - If you say yes here you get support for the Sensiron SHT10, SHT11, > - SHT15, SHT71, SHT75 humidity and temperature sensors. > - > - This driver can also be built as a module. If so, the module > - will be called sht15. > - > -config SENSORS_S3C > - tristate "S3C24XX/S3C64XX Inbuilt ADC" > - depends on ARCH_S3C2410 > - help > - If you say yes here you get support for the on-board ADCs of > - the Samsung S3C24XX or S3C64XX series of SoC > - > - This driver can also be built as a module. If so, the module > - will be called s3c-hwmo. > - > -config SENSORS_S3C_RAW > - bool "Include raw channel attributes in sysfs" > - depends on SENSORS_S3C > - help > - Say Y here if you want to include raw copies of all the ADC > - channels in sysfs. > - > config SENSORS_SIS5595 > tristate "Silicon Integrated Systems Corp. SiS5595" > depends on PCI > @@ -802,16 +684,6 @@ > This driver can also be built as a module. If so, the module > will be called ads7828. > > -config SENSORS_AMC6821 > - tristate "Texas Instruments AMC6821" > - depends on I2C && EXPERIMENTAL > - help > - If you say yes here you get support for the Texas Instruments > - AMC6821 hardware monitoring chips. > - > - This driver can also be build as a module. If so, the module > - will be called amc6821. > - > config SENSORS_THMC50 > tristate "Texas Instruments THMC50 / Analog Devices ADM1022" > depends on I2C && EXPERIMENTAL > @@ -822,34 +694,6 @@ > This driver can also be built as a module. If so, the module > will be called thmc50. > > -config SENSORS_TMP401 > - tristate "Texas Instruments TMP401 and compatibles" > - depends on I2C && EXPERIMENTAL > - help > - If you say yes here you get support for Texas Instruments TMP401 and > - TMP411 temperature sensor chips. > - > - This driver can also be built as a module. If so, the module > - will be called tmp401. > - > -config SENSORS_TMP421 > - tristate "Texas Instruments TMP421 and compatible" > - depends on I2C && EXPERIMENTAL > - help > - If you say yes here you get support for Texas Instruments TMP421, > - TMP422 and TMP423 temperature sensor chips. > - > - This driver can also be built as a module. If so, the module > - will be called tmp421. > - > -config SENSORS_VIA_CPUTEMP > - tristate "VIA CPU temperature sensor" > - depends on X86 > - help > - If you say yes here you get support for the temperature > - sensor inside your CPU. Supported are all known variants of > - the VIA C7 and Nano. > - > config SENSORS_VIA686A > tristate "VIA686A" > depends on PCI > @@ -896,7 +740,7 @@ > > config SENSORS_W83791D > tristate "Winbond W83791D" > - depends on I2C > + depends on I2C && EXPERIMENTAL > select HWMON_VID > help > If you say yes here you get support for the Winbond W83791D chip. > @@ -919,8 +763,7 @@ > select HWMON_VID > help > If you say yes here you get support for the Winbond W83793 > - hardware monitoring chip, including support for the integrated > - watchdog. > + hardware monitoring chip. > > This driver can also be built as a module. If so, the module > will be called w83793. > @@ -958,7 +801,7 @@ > will be called w83627hf. > > config SENSORS_W83627EHF > - tristate "Winbond W83627EHF/EHG/DHG, W83667HG" > + tristate "Winbond W83627EHF/DHG" > select HWMON_VID > help > If you say yes here you get support for the hardware > @@ -969,32 +812,9 @@ > chip suited for specific Intel processors that use PECI such as > the Core 2 Duo. > > - This driver also supports the W83667HG chip. > - > This driver can also be built as a module. If so, the module > will be called w83627ehf. > > -config SENSORS_WM831X > - tristate "WM831x PMICs" > - depends on MFD_WM831X > - help > - If you say yes here you get support for the hardware > - monitoring functionality of the Wolfson Microelectronics > - WM831x series of PMICs. > - > - This driver can also be built as a module. If so, the module > - will be called wm831x-hwmon. > - > -config SENSORS_WM8350 > - tristate "Wolfson Microelectronics WM835x" > - depends on MFD_WM8350 > - help > - If you say yes here you get support for the hardware > - monitoring features of the WM835x series of PMICs. > - > - This driver can also be built as a module. If so, the module > - will be called wm8350-hwmon. > - > config SENSORS_ULTRA45 > tristate "Sun Ultra45 PIC16F747" > depends on SPARC64 > @@ -1022,39 +842,24 @@ > Say Y here if you have an applicable laptop and want to experience > the awesome power of hdaps. > > -config SENSORS_LIS3_SPI > - tristate "STMicroeletronics LIS3LV02Dx three-axis digital accelerometer (SPI)" > - depends on !ACPI && SPI_MASTER && INPUT > - select INPUT_POLLDEV > +config SENSORS_LIS3LV02D > + tristate "STMicroeletronics LIS3LV02Dx three-axis digital accelerometer" > + depends on ACPI && INPUT > default n > help > - This driver provides support for the LIS3LV02Dx accelerometer connected > - via SPI. The accelerometer data is readable via > + This driver provides support for the LIS3LV02Dx accelerometer. In > + particular, it can be found in a number of HP laptops, which have the > + "Mobile Data Protection System 3D" or "3D DriveGuard" feature. On such > + systems the driver should load automatically (via ACPI). The > + accelerometer might also be found in other systems, connected via SPI > + or I2C. The accelerometer data is readable via > /sys/devices/platform/lis3lv02d. > > This driver also provides an absolute input class device, allowing > the laptop to act as a pinball machine-esque joystick. > > - This driver can also be built as modules. If so, the core module > - will be called lis3lv02d and a specific module for the SPI transport > - is called lis3lv02d_spi. > - > -config SENSORS_LIS3_I2C > - tristate "STMicroeletronics LIS3LV02Dx three-axis digital accelerometer (I2C)" > - depends on I2C && INPUT > - select INPUT_POLLDEV > - default n > - help > - This driver provides support for the LIS3LV02Dx accelerometer connected > - via I2C. The accelerometer data is readable via > - /sys/devices/platform/lis3lv02d. > - > - This driver also provides an absolute input class device, allowing > - the device to act as a pinball machine-esque joystick. > - > - This driver can also be built as modules. If so, the core module > - will be called lis3lv02d and a specific module for the I2C transport > - is called lis3lv02d_i2c. > + This driver can also be built as a module. If so, the module > + will be called lis3lv02d. > > config SENSORS_APPLESMC > tristate "Apple SMC (Motion sensor, light sensor, keyboard backlight)" > @@ -1081,58 +886,13 @@ > Say Y here if you have an applicable laptop and want to experience > the awesome power of applesmc. > > -config SENSORS_MC13783_ADC > - tristate "Freescale MC13783 ADC" > - depends on MFD_MC13783 > - help > - Support for the A/D converter on MC13783 PMIC. > - > -if ACPI > - > -comment "ACPI drivers" > - > -config SENSORS_ATK0110 > - tristate "ASUS ATK0110" > - depends on X86 && EXPERIMENTAL > - help > - If you say yes here you get support for the ACPI hardware > - monitoring interface found in many ASUS motherboards. This > - driver will provide readings of fans, voltages and temperatures > - through the system firmware. > - > - This driver can also be built as a module. If so, the module > - will be called asus_atk0110. > - > -config SENSORS_LIS3LV02D > - tristate "STMicroeletronics LIS3* three-axis digital accelerometer" > - depends on INPUT > - select INPUT_POLLDEV > - select NEW_LEDS > - select LEDS_CLASS > +config HWMON_DEBUG_CHIP > + bool "Hardware Monitoring Chip debugging messages" > default n > help > - This driver provides support for the LIS3* accelerometers, such as the > - LIS3LV02DL or the LIS331DL. In particular, it can be found in a number > - of HP laptops, which have the "Mobile Data Protection System 3D" or > - "3D DriveGuard" feature. On such systems the driver should load > - automatically (via ACPI alias). The accelerometer might also be found > - in other systems, connected via SPI or I2C. The accelerometer data is > - readable via /sys/devices/platform/lis3lv02d. > - > - This driver also provides an absolute input class device, allowing > - a laptop to act as a pinball machine-esque joystick. It provides also > - a misc device which can be used to detect free-fall. On HP laptops, > - if the led infrastructure is activated, support for a led indicating > - disk protection will be provided as hp::hddprotect. For more > - information on the feature, refer to Documentation/hwmon/lis3lv02d. > - > - This driver can also be built as modules. If so, the core module > - will be called lis3lv02d and a specific module for HP laptops will be > - called hp_accel. > - > - Say Y here if you have an applicable laptop and want to experience > - the awesome power of lis3lv02d. > - > -endif # ACPI > + Say Y here if you want the I2C chip drivers to produce a bunch of > + debug messages to the system log. Select this if you are having > + a problem with I2C support and want to see more of what is going > + on. > > endif # HWMON --- ~Randy *** Remember to use Documentation/SubmitChecklist when testing your code *** desserts: http://www.xenotime.net/linux/recipes/ _______________________________________________ lm-sensors mailing list lm-sensors@xxxxxxxxxxxxxx http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
