Cascaded conditionals are inefficient. Reorder the fields so that
PWM register addresses can be computed more efficiently.
Signed-off-by: Jean Delvare <khali@xxxxxxxxxxxx>
---
drivers/hwmon/w83795.c | 18 +++++++-----------
1 file changed, 7 insertions(+), 11 deletions(-)
--- linux-2.6.36-rc4.orig/drivers/hwmon/w83795.c 2010-09-15 15:14:13.000000000 +0200
+++ linux-2.6.36-rc4/drivers/hwmon/w83795.c 2010-09-15 15:15:24.000000000 +0200
@@ -178,15 +178,11 @@ static const u8 IN_LSB_SHIFT_IDX[][2] =
#define W83795_REG_TSS(index) (0x209 + (index))
#define PWM_OUTPUT 0
-#define PWM_START 1
-#define PWM_NONSTOP 2
-#define PWM_STOP_TIME 3
-#define PWM_FREQ 4
-#define W83795_REG_PWM(index, nr) \
- (((nr) == 0 ? 0x210 : \
- (nr) == 1 ? 0x220 : \
- (nr) == 2 ? 0x228 : \
- (nr) == 3 ? 0x230 : 0x218) + (index))
+#define PWM_FREQ 1
+#define PWM_START 2
+#define PWM_NONSTOP 3
+#define PWM_STOP_TIME 4
+#define W83795_REG_PWM(index, nr) (0x210 + (nr) * 8 + (index))
#define W83795_REG_FTSH(index) (0x240 + (index) * 2)
#define W83795_REG_FTSL(index) (0x241 + (index) * 2)
@@ -356,8 +352,8 @@ struct w83795_data {
u8 has_pwm; /* 795g supports 8 pwm, 795adg only supports 2,
* no config register, only affected by chip
* type */
- u8 pwm[8][5]; /* Register value, output, start, non stop, stop
- * time, freq */
+ u8 pwm[8][5]; /* Register value, output, freq, start,
+ * non stop, stop time */
u16 clkin; /* CLKIN frequency in kHz */
u8 pwm_fcms[2]; /* Register value */
u8 pwm_tfmr[6]; /* Register value */
_______________________________________________
lm-sensors mailing list
lm-sensors@xxxxxxxxxxxxxx
http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
