This patch adds support for max6695/96 to sensors-detect.
---
Index: prog/detect/sensors-detect
===================================================================
--- prog/detect/sensors-detect (revision 5857)
+++ prog/detect/sensors-detect (working copy)
@@ -921,8 +921,13 @@
name => "Maxim MAX6680/MAX6681",
driver => "lm90",
i2c_addrs => [0x18..0x1a, 0x29..0x2b, 0x4c..0x4e],
- i2c_detect => sub { lm90_detect(@_, 7); },
+ i2c_detect => sub { max6680_95_detect(@_, 0); },
}, {
+ name => "Maxim MAX6695/MAX6696",
+ driver => "lm90",
+ i2c_addrs => [0x18..0x1a, 0x29..0x2b, 0x4c..0x4e],
+ i2c_detect => sub { max6680_95_detect(@_, 1); },
+ }, {
name => "Winbond W83L771W/G",
driver => "to-be-written",
i2c_addrs => [0x4c],
@@ -4051,10 +4056,46 @@
return $confidence;
}
+# Chip to detect: 0 = MAX6680/81, 1 = MAX6695/96
+# Registers used:
+# 0x03: Configuration
+# 0x04: Conversion rate
+# 0x12: Status2
+# 0x16: Overtemperature 2
+# 0xfe: Manufacturer ID
+# 0xff: Chip ID / die revision
+sub max6680_95_detect
+{
+ my ($file, $addr, $chip) = @_;
+ my $mid = i2c_smbus_read_byte_data($file, 0xfe);
+ my $cid = i2c_smbus_read_byte_data($file, 0xff);
+ my $conf = i2c_smbus_read_byte_data($file, 0x03);
+ my $rate = i2c_smbus_read_byte_data($file, 0x04);
+ my $emerg = i2c_smbus_read_byte_data($file, 0x16);
+ my $status2 = i2c_smbus_read_byte_data($file, 0x12);
+
+ if ($chip == 0) {
+ return if ($conf & 0x03) != 0;
+ return if $rate > 0x07;
+ return if $emerg != $rate;
+ return if $mid != 0x4d; # Maxim
+ return 8 if $cid == 0x01; # MAX6680/MAX6681
+ }
+ if ($chip == 1) {
+ return if ($conf & 0x10) != 0;
+ return if ($status2 & 0x01) != 0;
+ return if $rate > 0x07;
+ return if $emerg == $rate;
+ return if $mid != 0x4d; # Maxim
+ return 8 if $cid == 0x01; # MAX6695/MAX6696
+ }
+ return;
+}
+
# Chip to detect: 0 = LM90, 1 = LM89/LM99, 2 = LM86, 3 = ADM1032,
# 4 = MAX6654, 5 = ADT7461,
# 6 = MAX6646/MAX6647/MAX6648/MAX6649/MAX6692,
-# 7 = MAX6680/MAX6681, 8 = W83L771W/G, 9 = TMP401, 10 = TMP411,
+# 7 = unused, 8 = W83L771W/G, 9 = TMP401, 10 = TMP411,
# 11 = W83L771AWG/ASG, 12 = MAX6690
# Registers used:
# 0x03: Configuration
@@ -4116,10 +4157,7 @@
return 8 if $cid == 0x59; # MAX6648/MAX6692
}
if ($chip == 7) {
- return if ($conf & 0x03) != 0;
- return if $rate > 0x07;
- return if $mid != 0x4d; # Maxim
- return 8 if $cid == 0x01; # MAX6680/MAX6681
+ return;
}
if ($chip == 8) {
return if ($conf & 0x2a) != 0;
_______________________________________________
lm-sensors mailing list
lm-sensors@xxxxxxxxxxxxxx
http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
