|
hi under ubuntu 10.04LTS on dell vostro 3500 Intel Corporation 5 Series/3400 Series Chipset SMBus Controller [8086:3b30] (rev 06) By default i2c-i801 is in blacklist.conf if i remove from blacklist here it is dmesg i801_smbus 0000:00:1f.3: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 14.801179] ACPI: resource 0000:00:1f.3 [0xf000-0xf01f] conflicts with ACPI region SMBI [0xf000-0xf00f] [ 14.801182] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver where SMBI is in DSDT_DELL_WN09.dsl OperationRegion (SMBI, SystemIO, ShiftLeft (SBAR, 0x05), 0x10) Field (SMBI, ByteAcc, NoLock, Preserve) { HSTS, 8, Offset (0x02), HCON, 8, HCOM, 8, TXSA, 8, DAT0, 8, DAT1, 8, HBDR, 8, PECR, 8, RXSA, 8, SDAT, 16 } lspci -vvnnxxxx 00:1f.3 SMBus [0c05]: Intel Corporation 5 Series/3400 Series Chipset SMBus Controller [8086:3b30] (rev 06) Subsystem: Dell Device [1028:0441] Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Interrupt: pin C routed to IRQ 18 Region 0: Memory at fbc05000 (64-bit, non-prefetchable) [size=256] Region 4: I/O ports at f000 [size=32] Kernel modules: i2c-i801 00: 86 80 30 3b 03 00 80 02 06 00 05 0c 00 00 00 00 10: 04 50 c0 fb 00 00 00 00 00 00 00 00 00 00 00 00 20: 01 f0 00 00 00 00 00 00 00 00 00 00 28 10 41 04 30: 00 00 00 00 00 00 00 00 00 00 00 00 03 03 00 00 finaly, with or without i2c-i801 and//or k8temp load at startup sensors return only fidit@de100816A:~$ sensors acpitz-virtual-0 Adapter: Virtual device temp1: +39.5°C (crit = +100.0°C) under everest on seven, 6 temp are detect. |
_______________________________________________ lm-sensors mailing list lm-sensors@xxxxxxxxxxxxxx http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
