On Fri, 23 Jul 2010 10:09:28 +0800
Chen Gong <gong.chen@xxxxxxxxxxxxxxx> wrote:
> update coretemp supported CPU TjMax lists and some cleanup work.
Patches #1 and #2 are unaltered. Below are the alterations which you
made to patch #3. No explanation of these changes has been provided.
Documentation/hwmon/coretemp | 9 +++++----
drivers/hwmon/coretemp.c | 4 ++--
2 files changed, 7 insertions(+), 6 deletions(-)
diff -puN Documentation/hwmon/coretemp~hwmon-coretemp-documentation-update-and-cleanup-update Documentation/hwmon/coretemp
--- a/Documentation/hwmon/coretemp~hwmon-coretemp-documentation-update-and-cleanup-update
+++ a/Documentation/hwmon/coretemp
@@ -21,8 +21,8 @@ Temperature is measured in degrees Celsi
1 degree C. Valid temperatures are from 0 to TjMax degrees C, because
the actual value of temperature register is in fact a delta from TjMax.
-Temperature known as TjMax is the maximum junction temperature of processor.
-Intel defines this temperature as 80C or 105C. At this temperature, protection
+Temperature known as TjMax is the maximum junction temperature of processor,
+which depends on the CPU model. See table below. At this temperature, protection
mechanism will perform actions to forcibly cool down the processor. Alarm
may be raised, if the temperature grows enough (more than TjMax) to trigger
the Out-Of-Spec bit. Following table summarizes the exported sysfs files:
@@ -65,8 +65,8 @@ Process Processor TjMax(C)
45nm Xeon Processors 5200 Dual-Core
X5282, X5272, X5270, X5260 90
- E5240, E5220, E5205 90
- E5205, E5220 70
+ E5240 90
+ E5205, E5220 70, 90
L5240 70
L5238, L5215 95
@@ -76,6 +76,7 @@ Process Processor TjMax(C)
Z510/500 90
N475/470/455/450 100
N280/270 90
+ 330/230 125
45nm Core2 Processors
Solo ULV SU3500/3300 100
diff -puN drivers/hwmon/coretemp.c~hwmon-coretemp-documentation-update-and-cleanup-update drivers/hwmon/coretemp.c
--- a/drivers/hwmon/coretemp.c~hwmon-coretemp-documentation-update-and-cleanup-update
+++ a/drivers/hwmon/coretemp.c
@@ -54,12 +54,12 @@ struct coretemp_data {
const char *name;
u32 id;
u16 core_id;
- u8 alarm;
char valid; /* zero until following fields are valid */
unsigned long last_updated; /* in jiffies */
int temp;
int tjmax;
int ttarget;
+ u8 alarm;
};
/*
@@ -308,7 +308,7 @@ static int __devinit coretemp_probe(stru
#ifdef CONFIG_SMP
data->core_id = c->cpu_core_id;
#endif
- data->name = DRVNAME;
+ data->name = "coretemp";
mutex_init(&data->update_lock);
/* test if we can access the THERM_STATUS MSR */
_
_______________________________________________
lm-sensors mailing list
lm-sensors@xxxxxxxxxxxxxx
http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
