Hello everybody, I switched my motherboard from an Asus M4A78 PRO with ATK0110 and IT8721F to a Gigabyte GA-890GPA-UD3H with an iTE IT8720. This way I was able to control my PWM outputs needed for fan control. (see topic in mail archive) I want to be able to control one of the PWM outputs based on the average output of the temperature of my hard drives. I setup /etc/fancontrol but it only looks at temperatures from the motherboard witch is kind of useless for me. I do not want to use some custom system to directly set the PWM. I can life with a shell script that the fancontrol program can use. Is this possible and how, and if not, would somebody be willing to make this? Thanks in advance, With kind regards, Jelle de Jong
# cat /etc/fancontrol # Configuration file generated by pwmconfig, changes will be lost INTERVAL=10 DEVPATH=hwmon0=devices/platform/it87.552 DEVNAME=hwmon0=it8720 FCTEMPS=hwmon0/device/pwm2=hwmon0/device/temp3_input hwmon0/device/pwm1=hwmon0/device/temp2_input FCFANS=hwmon0/device/pwm2=hwmon0/device/fan2_input hwmon0/device/pwm1=hwmon0/device/fan1_input MINTEMP=hwmon0/device/pwm2=41 hwmon0/device/pwm1=35 MAXTEMP=hwmon0/device/pwm2=45 hwmon0/device/pwm1=55 MINSTART=hwmon0/device/pwm2=58 hwmon0/device/pwm1=70 MINSTOP=hwmon0/device/pwm2=58 hwmon0/device/pwm1=66 # sensors it8720-isa-0228 Adapter: ISA adapter in0: +0.99 V (min = +0.00 V, max = +4.08 V) in1: +1.50 V (min = +0.00 V, max = +4.08 V) in2: +3.30 V (min = +0.00 V, max = +4.08 V) in3: +2.88 V (min = +0.00 V, max = +4.08 V) in4: +3.12 V (min = +0.00 V, max = +4.08 V) in5: +1.82 V (min = +0.00 V, max = +4.08 V) in6: +4.08 V (min = +0.00 V, max = +4.08 V) in7: +2.13 V (min = +0.00 V, max = +4.08 V) Vbat: +3.25 V fan1: 986 RPM (min = 0 RPM) fan2: 1626 RPM (min = 0 RPM) fan3: 0 RPM (min = 0 RPM) fan5: 0 RPM (min = 0 RPM) temp1: +45.0 C (low = +127.0 C, high = +127.0 C) sensor = thermistor temp2: +36.0 C (low = +127.0 C, high = +127.0 C) sensor = thermal diode temp3: +43.0 C (low = +127.0 C, high = +127.0 C) sensor = thermistor cpu0_vid: +0.513 V # hddtemp /dev/sd[abcdefghijklmnop] /dev/sda: WDC WD10EARS-00Y5B1: 46 C /dev/sdb: SAMSUNG HD501LJ: 42 C /dev/sdc: WDC WD10EARS-00Y5B1: 44 C /dev/sdd: SAMSUNG HD103UJ: drive is sleeping /dev/sde: SAMSUNG HD103UJ: drive is sleeping /dev/sdf: ST3500630AS: 50 C /dev/sdg: Hitachi HDT725032VLA360: 45 C /dev/sdh: WDC WD5000AAKS-00V1A0: 40 C /dev/sdi: WDC WD10EARS-00Y5B1: 48 C /dev/sdj: SAMSUNG HD501LJ: 44 C /dev/sdk: WDC WD10EARS-00Y5B1: 47 C /dev/sdl: SAMSUNG HD103UJ: drive is sleeping /dev/sdm: SAMSUNG HD103UJ: drive is sleeping /dev/sdn: ST3500418AS: 40 C /dev/sdo: Maxtor 6V320F0: 46 C /dev/sdp: WDC WD5000AAKS-65YGA0: 42 C
_______________________________________________ lm-sensors mailing list lm-sensors@xxxxxxxxxxxxxx http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
