On Wed, Jun 30, 2010 at 03:45:33PM -0400, Jean Delvare wrote: > Hi Guenter, > > Please don't top-post. > Sorry > On Wed, 30 Jun 2010 10:27:46 -0700, Guenter Roeck wrote: > > I don't have a datasheet, but from looking into the "Open Hardware Monitor" source > > it seems that W83667HG and W83667HG-B are identical from a programming perspective. > > Only difference is the chip ID, which should be 0xb350 instead of 0xa510. > > I have a datasheet, which unfortunately I can't share. I never had the > time to read it, but as far as I know, the monitoring part is > compatible with the -A variant, while the automatic fan speed control > isn't. So a safe approach would be to only enable monitoring and > disabling the fan speed control interface. > The folks at Nuvoton are actually quite nice and sent me a copy. I browsed through it, specifically the fan control section, but I don't see what might be different to the current implementation. Of course it would help to have a copy of the W83667HG datasheet to be able to compare .. I'll see if I can get that one as well. Guenter _______________________________________________ lm-sensors mailing list lm-sensors@xxxxxxxxxxxxxx http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
