On Tue, Jun 22, 2010 at 10:10:38PM +0200, Jean Delvare wrote: > Hi Lars, > > > Could you please provide a dump of the configuration register space of > your chip? I'd like to check something: Hi Jean, Thanks for your interest in this board. > > # isaset -y -k 0x87,0x01,0x55,0x55 0x2e 0x2f 7 > The -k option is not supported by /usr/sbin/isaset under Ubuntu 10.04: $ sudo isaset Syntax for I2C-like access: isaset [-y] ADDRREG DATAREG ADDRESS VALUE [MASK] Syntax for flat address space: isaset [-y] -f ADDRESS VALUE [MASK] > Together with the output of "sensors", and the revision of your chip > (printed in the kernel logs when you load the it87 driver). $ grep it87 /var/log/dmesg [ 3.992279] it87: Found IT8720F chip at 0xa10, revision 8 [ 3.992288] it87: in3 is VCC (+5V) [ 3.992290] it87: in7 is VCCH (+5V Stand-By) $ sensors it8720-isa-0a10 Adapter: ISA adapter Vcore: +0.90 V (min = +4.08 V, max = +4.08 V) ALARM Vtt: +1.15 V (min = +4.08 V, max = +4.08 V) ALARM +3.30V: +3.28 V (min = +4.08 V, max = +4.08 V) ALARM in3: +2.91 V (min = +4.08 V, max = +4.08 V) ALARM in4: +2.83 V (min = +4.08 V, max = +4.08 V) ALARM CPU PLL: +1.81 V (min = +4.08 V, max = +4.08 V) ALARM DRAM Voltage: +1.65 V (min = +4.08 V, max = +4.08 V) ALARM in7: +2.90 V (min = +4.08 V, max = +4.08 V) ALARM Vbat: +3.36 V PWM fan: 0 RPM (min = 0 RPM) CPU fan: 448 RPM (min = 0 RPM) PCH Temp: +43.0°C (low = -1.0°C, high = -1.0°C) ALARM sensor = thermistor PWM Temp: +43.0°C (low = -1.0°C, high = -1.0°C) ALARM sensor = thermistor CPU Temp: +30.0°C (low = +13.0°C, high = +13.0°C) ALARM sensor = disabled cpu0_vid: +1.300 V > > Thanks, > -- > Jean Delvare You are welcome to ask for other tests. -Lars Lundin.
_______________________________________________ lm-sensors mailing list lm-sensors@xxxxxxxxxxxxxx http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
