On Thu, May 20, 2010 at 09:35:56PM +0200, Andre Prendel wrote:
> On Thu, May 20, 2010 at 03:07:05PM -0400, Jeff Angielski wrote:
> > On 05/20/2010 02:50 PM, Andre Prendel wrote:
> > > You made a careless mistake, see below. Please fix this and resend the patch
> > > again. Then I added my Acked-by and I think Jean will schedule the patch for
> > > 2.6.35 (after another review of course :))
> >
> > You sir, would be correct... *sigh* I tried using the scripts/Lindent on it to
> > be sure there were no coding style issues but that messed up even your original
> > code.
>
> /scripts/checkpatch.pl is the key ;)
>
> > In any event, here it is again:
>
> Acked-by: Andre Prendel <andre.prendel@xxxxxx>
Hi Jean,
Any News on this patch?
> >
> > >From 9acd29ff48c64e58a7f5cdb888c86e737c56281c Mon Sep 17 00:00:00 2001
> > From: Jeff Angielski <jeff@xxxxxxxxxxxxxxx>
> > Date: Mon, 10 May 2010 10:26:34 -0400
> > Subject: [PATCH] hwmon: (tmp421) Add nfactor support
> >
> > Add support for reading and writing the n-factor correction
> > registers. This is needed to compensate for the characteristics
> > of a particular sensor hanging off of the remote channels.
> >
> > Signed-off-by: Jeff Angielski <jeff@xxxxxxxxxxxxxxx>
> > ---
> > Documentation/hwmon/tmp421 | 19 +++++++++++++++++++
> > drivers/hwmon/tmp421.c | 41 +++++++++++++++++++++++++++++++++++++++++
> > 2 files changed, 60 insertions(+), 0 deletions(-)
> >
> > diff --git a/Documentation/hwmon/tmp421 b/Documentation/hwmon/tmp421
> > index 0cf07f8..668228a 100644
> > --- a/Documentation/hwmon/tmp421
> > +++ b/Documentation/hwmon/tmp421
> > @@ -17,6 +17,7 @@ Supported chips:
> >
> > Authors:
> > Andre Prendel <andre.prendel@xxxxxx>
> > + Jeff Angielski <jeff@xxxxxxxxxxxxxxx>
> >
> > Description
> > -----------
> > @@ -34,3 +35,21 @@ the temperature values via the following sysfs files:
> >
> > temp[1-4]_input
> > temp[2-4]_fault
> > +
> > +The chips allow the user to adjust the n-factor value that is used
> > +when converting the remote channel measurements to temperature. The
> > +adjustment has a range of -128 to +127 that yields an effective
> > +n-factor range of 0.706542 to 1.747977. The power on reset value
> > +for the adjustment is 0 which results in an n-factor of 1.008.
> > +
> > +The effective n-factor is calculated according to the following
> > +equation:
> > +
> > +n_factor = (1.008 * 300) / (300 - nfactor_adjust)
> > +
> > +The driver exports the n-factor adjustment value via the following
> > +sysfs files:
> > +
> > +temp[2-4]_n_adjust
> > +
> > +
> > diff --git a/drivers/hwmon/tmp421.c b/drivers/hwmon/tmp421.c
> > index 738c472..dfd62be 100644
> > --- a/drivers/hwmon/tmp421.c
> > +++ b/drivers/hwmon/tmp421.c
> > @@ -49,6 +49,7 @@ enum chips { tmp421, tmp422, tmp423 };
> >
> > static const u8 TMP421_TEMP_MSB[4] = { 0x00, 0x01, 0x02, 0x03 };
> > static const u8 TMP421_TEMP_LSB[4] = { 0x10, 0x11, 0x12, 0x13 };
> > +static const u8 TMP421_N_CORRECT[3] = { 0x21, 0x22, 0x23 };
> >
> > /* Flags */
> > #define TMP421_CONFIG_SHUTDOWN 0x40
> > @@ -76,6 +77,7 @@ struct tmp421_data {
> > int channels;
> > u8 config;
> > s16 temp[4];
> > + s8 n_adjust[3];
> > };
> >
> > static int temp_from_s16(s16 reg)
> > @@ -115,6 +117,10 @@ static struct tmp421_data *tmp421_update_device(struct device *dev)
> > data->temp[i] |= i2c_smbus_read_byte_data(client,
> > TMP421_TEMP_LSB[i]);
> > }
> > + for (i = 1; i < data->channels; i++) {
> > + data->n_adjust[i - 1] = i2c_smbus_read_byte_data(client,
> > + TMP421_N_CORRECT[i - 1]);
> > + }
> > data->last_updated = jiffies;
> > data->valid = 1;
> > }
> > @@ -157,6 +163,32 @@ static ssize_t show_fault(struct device *dev,
> > return sprintf(buf, "0\n");
> > }
> >
> > +static ssize_t show_n_adjust(struct device *dev,
> > + struct device_attribute *devattr, char *buf)
> > +{
> > + int index = to_sensor_dev_attr(devattr)->index;
> > + struct tmp421_data *data = tmp421_update_device(dev);
> > +
> > + return sprintf(buf, "%d\n", data->n_adjust[index - 1]);
> > +}
> > +
> > +static ssize_t set_n_adjust(struct device *dev,
> > + struct device_attribute *devattr,
> > + const char *buf, size_t count)
> > +{
> > + struct i2c_client *client = to_i2c_client(dev);
> > + struct tmp421_data *data = i2c_get_clientdata(client);
> > + int index = to_sensor_dev_attr(devattr)->index;
> > + int n_adjust = simple_strtol(buf, NULL, 10);
> > +
> > + mutex_lock(&data->update_lock);
> > + i2c_smbus_write_byte_data(client, TMP421_N_CORRECT[index - 1],
> > + SENSORS_LIMIT(n_adjust, -128, 127));
> > + mutex_unlock(&data->update_lock);
> > +
> > + return count;
> > +}
> > +
> > static mode_t tmp421_is_visible(struct kobject *kobj, struct attribute *a,
> > int n)
> > {
> > @@ -177,19 +209,28 @@ static mode_t tmp421_is_visible(struct kobject *kobj, struct attribute *a,
> > static SENSOR_DEVICE_ATTR(temp1_input, S_IRUGO, show_temp_value, NULL, 0);
> > static SENSOR_DEVICE_ATTR(temp2_input, S_IRUGO, show_temp_value, NULL, 1);
> > static SENSOR_DEVICE_ATTR(temp2_fault, S_IRUGO, show_fault, NULL, 1);
> > +static SENSOR_DEVICE_ATTR(temp2_n_adjust, S_IRUSR | S_IWUSR | S_IRGRP,
> > + show_n_adjust, set_n_adjust, 1);
> > static SENSOR_DEVICE_ATTR(temp3_input, S_IRUGO, show_temp_value, NULL, 2);
> > static SENSOR_DEVICE_ATTR(temp3_fault, S_IRUGO, show_fault, NULL, 2);
> > +static SENSOR_DEVICE_ATTR(temp3_n_adjust, S_IRUSR | S_IWUSR | S_IRGRP,
> > + show_n_adjust, set_n_adjust, 2);
> > static SENSOR_DEVICE_ATTR(temp4_input, S_IRUGO, show_temp_value, NULL, 3);
> > static SENSOR_DEVICE_ATTR(temp4_fault, S_IRUGO, show_fault, NULL, 3);
> > +static SENSOR_DEVICE_ATTR(temp4_n_adjust, S_IRUSR | S_IWUSR | S_IRGRP,
> > + show_n_adjust, set_n_adjust, 3);
> >
> > static struct attribute *tmp421_attr[] = {
> > &sensor_dev_attr_temp1_input.dev_attr.attr,
> > &sensor_dev_attr_temp2_input.dev_attr.attr,
> > &sensor_dev_attr_temp2_fault.dev_attr.attr,
> > + &sensor_dev_attr_temp2_n_adjust.dev_attr.attr,
> > &sensor_dev_attr_temp3_input.dev_attr.attr,
> > &sensor_dev_attr_temp3_fault.dev_attr.attr,
> > + &sensor_dev_attr_temp3_n_adjust.dev_attr.attr,
> > &sensor_dev_attr_temp4_input.dev_attr.attr,
> > &sensor_dev_attr_temp4_fault.dev_attr.attr,
> > + &sensor_dev_attr_temp4_n_adjust.dev_attr.attr,
> > NULL
> > };
> >
> > --
> > 1.7.0.4
> >
> >
> > --
> > Jeff Angielski
> > The PTR Group
> > www.theptrgroup.com
> >
> > _______________________________________________
> > lm-sensors mailing list
> > lm-sensors@xxxxxxxxxxxxxx
> > http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
>
> _______________________________________________
> lm-sensors mailing list
> lm-sensors@xxxxxxxxxxxxxx
> http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
_______________________________________________
lm-sensors mailing list
lm-sensors@xxxxxxxxxxxxxx
http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
