Re: [PATCH 2/2] hwmon: (coretemp) Get TjMax value from MSR

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Mon, 2010-05-31 at 09:39 +0800, Huaxu Wan wrote: 
> On 08:39 Sat 29 May, Maxim Levitsky wrote:
> > On Fri, 2010-05-07 at 17:59 +0800, Huaxu Wan wrote: 
> > > The MSR IA32_TEMPERATURE_TARGET contains the TjMax value in the newer
> > > processers.
> > 
> > I know that TjMax on my system is 85, and now coretemp reports wrong
> > temperatures.
> > First of all BIOS using stupid tricks actualy reports CPU temperature
> > through ACPI, and assuming it was correct TjMax is 85.
> > It also shuts down the system if I 'lie' to it that cpu temperature is
> > 85C.
> 
> From the list at [1], the TjMax(Tjunction) of T5450 is 100C. Does anyone
> here can make a double check?
> 
> [1] http://ark.intel.com/Product.aspx?id=30787&processor=T5450&spec-codes=SLA4F

This is very interesting.

With TjMax 85C, the CPUs idle temperature is reported at around 45~50C
GPU temperature that is around 60C

BIOS also reports 45~50C.

BIOS hooks an SMI to CPU thermal report, and stores the temperature it
read in ram, then ACPI code reads it, reports and passes to the EC
(embedded controller).

If I write myself 85 to embedded controller, systems shuts down.
(values less that 85, eg 84 don't shut system).

Thats all I know.

Best regards,
Maxim Levitsky


_______________________________________________
lm-sensors mailing list
lm-sensors@xxxxxxxxxxxxxx
http://lists.lm-sensors.org/mailman/listinfo/lm-sensors


[Index of Archives]     [Linux Kernel]     [Linux Hardware Monitoring]     [Linux USB Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [Yosemite Backpacking]

  Powered by Linux