The hardware only supports 3 settings: off, slow and fast.
In order to have a chance to work with existing fan control systems,
we emulate a PWM device with the following mapping:
0.. 15 off 0 RPM input
16..127 slow 100 RPM input
128..255 fast 2000 RPM input
This provides something more/less working with fancontrol, though
it does have a tendency to work by doing short bursts of "slow"
speed every half a minute as it settles around my min temp. Not
a big deal a specialized script could probably do better, or even
tweaks to fancontrol config. At leats it should be safe.
Signed-off-by: Benjamin Herrenschmidt <benh@xxxxxxxxxxxxxxxxxxx>
CC: lm-sensors@xxxxxxxxxxxxxx
---
drivers/hwmon/Kconfig | 12 ++
drivers/hwmon/Makefile | 1 +
drivers/hwmon/dns323c-fan.c | 271 +++++++++++++++++++++++++++++++++++++++++++
3 files changed, 284 insertions(+), 0 deletions(-)
create mode 100644 drivers/hwmon/dns323c-fan.c
diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig
index 9be8e17..5f55735 100644
--- a/drivers/hwmon/Kconfig
+++ b/drivers/hwmon/Kconfig
@@ -1087,6 +1087,18 @@ config SENSORS_MC13783_ADC
help
Support for the A/D converter on MC13783 PMIC.
+config SENSORS_DNS323C_FAN
+ tristate "D-Link DNS323 rev C1 Fan"
+ depends on MACH_DNS323
+ help
+ Support for the GPIO based fan control on the D-Link DNS323
+ HW revision C1. This exposes a pseudo pwm device with the
+ following values supported:
+
+ 0..15 : Fan off
+ 16..127 : Fan on low speed
+ 128..255 : Fan on high speed
+
if ACPI
comment "ACPI drivers"
diff --git a/drivers/hwmon/Makefile b/drivers/hwmon/Makefile
index 4aa1a3d..15bcdef 100644
--- a/drivers/hwmon/Makefile
+++ b/drivers/hwmon/Makefile
@@ -100,6 +100,7 @@ obj-$(CONFIG_SENSORS_W83L785TS) += w83l785ts.o
obj-$(CONFIG_SENSORS_W83L786NG) += w83l786ng.o
obj-$(CONFIG_SENSORS_WM831X) += wm831x-hwmon.o
obj-$(CONFIG_SENSORS_WM8350) += wm8350-hwmon.o
+obj-$(CONFIG_SENSORS_DNS323C_FAN)+= dns323c-fan.o
ifeq ($(CONFIG_HWMON_DEBUG_CHIP),y)
EXTRA_CFLAGS += -DDEBUG
diff --git a/drivers/hwmon/dns323c-fan.c b/drivers/hwmon/dns323c-fan.c
new file mode 100644
index 0000000..4ae18d0
--- /dev/null
+++ b/drivers/hwmon/dns323c-fan.c
@@ -0,0 +1,271 @@
+/*
+ * dns323c_fan - Driver for the D-LINK DNS-323 rev C1 fan control
+ *
+ * Copyright 2010 Benjamin Herrenschmidt
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/gpio.h>
+#include <linux/hwmon.h>
+
+#include <linux/hwmon-sysfs.h>
+#include <linux/gfp.h>
+#include <linux/slab.h>
+#include <linux/err.h>
+#include <linux/sysfs.h>
+#include <linux/platform_device.h>
+
+enum fan_speed {
+ FAN_OFF,
+ FAN_LOW ,
+ FAN_FAST,
+ FAN_FAST_LOCK,
+};
+
+#define DNS323C_GPIO_FAN_BIT1 18
+#define DNS323C_GPIO_FAN_BIT0 19
+
+struct dns323c_fan {
+ struct device *hwmon;
+ struct mutex lock;
+ enum fan_speed speed;
+};
+
+static void __set_fan_speed(struct dns323c_fan *fan, enum fan_speed speed)
+{
+ if (speed == fan->speed)
+ return;
+
+ switch(speed) {
+ case FAN_OFF:
+ gpio_set_value(DNS323C_GPIO_FAN_BIT1, 0);
+ gpio_set_value(DNS323C_GPIO_FAN_BIT0, 0);
+ break;
+ case FAN_LOW:
+ gpio_set_value(DNS323C_GPIO_FAN_BIT1, 0);
+ gpio_set_value(DNS323C_GPIO_FAN_BIT0, 1);
+ break;
+ default:
+ gpio_set_value(DNS323C_GPIO_FAN_BIT0, 0);
+ gpio_set_value(DNS323C_GPIO_FAN_BIT1, 1);
+ };
+ fan->speed = speed;
+}
+
+static ssize_t show_name(struct device *dev, struct device_attribute *da,
+ char *buf)
+{
+ return sprintf(buf, "dns323c-fan\n");
+}
+
+static ssize_t show_pwm(struct device *dev, struct device_attribute *da,
+ char *buf)
+{
+ struct dns323c_fan *fan = dev_get_drvdata(dev);
+ int pseudo_pwm;
+
+ switch(fan->speed) {
+ case FAN_OFF:
+ pseudo_pwm = 0;
+ break;
+ case FAN_LOW:
+ pseudo_pwm = 63;
+ break;
+ default:
+ pseudo_pwm = 255;
+ }
+ return sprintf(buf, "%d\n", pseudo_pwm);
+}
+
+static ssize_t set_pwm(struct device *dev, struct device_attribute *da,
+ const char *buf, size_t count)
+{
+ struct dns323c_fan *fan = dev_get_drvdata(dev);
+ enum fan_speed speed;
+ unsigned long val;
+
+ if (strict_strtoul(buf, 10, &val))
+ return -EINVAL;
+ if (fan->speed == FAN_FAST_LOCK)
+ return count;
+
+ mutex_lock(&fan->lock);
+ if (val < 16)
+ speed = FAN_OFF;
+ else if (val < 128)
+ speed = FAN_LOW;
+ else
+ speed = FAN_FAST;
+ __set_fan_speed(fan, speed);
+ mutex_unlock(&fan->lock);
+
+ return count;
+}
+
+static ssize_t show_pwm_en(struct device *dev, struct device_attribute *da,
+ char *buf)
+{
+ struct dns323c_fan *fan = dev_get_drvdata(dev);
+
+ if (fan->speed == FAN_FAST_LOCK)
+ return sprintf(buf, "0\n");
+ else
+ return sprintf(buf, "1\n");
+}
+
+static ssize_t set_pwm_en(struct device *dev, struct device_attribute *da,
+ const char *buf, size_t count)
+{
+ struct dns323c_fan *fan = dev_get_drvdata(dev);
+ enum fan_speed speed;
+ unsigned long val;
+
+ if (strict_strtoul(buf, 10, &val))
+ return -EINVAL;
+ if (val != 0 && val != 1)
+ return -EINVAL;
+
+ mutex_lock(&fan->lock);
+ if (val == 0 && fan->speed != FAN_FAST_LOCK)
+ speed = FAN_FAST_LOCK;
+ else if (val != 0 && fan->speed == FAN_FAST_LOCK)
+ speed = FAN_FAST;
+ else
+ speed = fan->speed;
+ __set_fan_speed(fan, speed);
+ mutex_unlock(&fan->lock);
+
+ return count;
+}
+
+static ssize_t show_fake_rpm(struct device *dev, struct device_attribute *da,
+ char *buf)
+{
+ struct dns323c_fan *fan = dev_get_drvdata(dev);
+ int pseudo_rpm;
+
+ switch(fan->speed) {
+ case FAN_OFF:
+ pseudo_rpm = 0;
+ break;
+ case FAN_LOW:
+ pseudo_rpm = 400;
+ break;
+ default:
+ pseudo_rpm = 2000;
+ }
+ return sprintf(buf, "%d\n", pseudo_rpm);
+}
+
+static DEVICE_ATTR(name, S_IRUGO, show_name, NULL);
+static DEVICE_ATTR(pwm1, S_IRUGO | S_IWUSR, show_pwm, set_pwm);
+static DEVICE_ATTR(pwm1_enable, S_IRUGO | S_IWUSR, show_pwm_en, set_pwm_en);
+static DEVICE_ATTR(fan1_input, S_IRUGO, show_fake_rpm, NULL);
+
+static int dns323c_fan_probe(struct platform_device *pdev)
+{
+ struct dns323c_fan *fan = NULL;
+ int ret = -ENXIO;
+
+ /* Get the GPIOs */
+ if (gpio_request(DNS323C_GPIO_FAN_BIT0, "FAN0") != 0) {
+ pr_err("dns323c_fan: Failed to request fan GPIO 0 !\n");
+ return -ENXIO;
+ }
+ if (gpio_request(DNS323C_GPIO_FAN_BIT1, "FAN1") != 0) {
+ pr_err("dns323c_fan: Failed to request fan GPIO 1 !\n");
+ goto err_gpio;
+ }
+
+ /* Set directions to output and medium speed. We write bit 1 first
+ * since it contains 0 to avoid having a transitory 11 state which
+ * isn't supported
+ */
+ gpio_direction_output(DNS323C_GPIO_FAN_BIT1, 0);
+ gpio_direction_output(DNS323C_GPIO_FAN_BIT0, 1);
+
+ /* Grab some memory for our state */
+ fan = kzalloc(sizeof(struct dns323c_fan), GFP_KERNEL);
+ if (!fan) {
+ ret = -ENOMEM;
+ goto err_alloc;
+ }
+ fan->speed = FAN_LOW;
+ mutex_init(&fan->lock);
+ platform_set_drvdata(pdev, fan);
+
+ ret = device_create_file(&pdev->dev, &dev_attr_name);
+ ret |= device_create_file(&pdev->dev, &dev_attr_pwm1);
+ ret |= device_create_file(&pdev->dev, &dev_attr_pwm1_enable);
+ ret |= device_create_file(&pdev->dev, &dev_attr_fan1_input);
+ if (ret)
+ goto err_file;
+
+ fan->hwmon = hwmon_device_register(&pdev->dev);
+ if (IS_ERR(fan->hwmon)) {
+ ret = PTR_ERR(fan->hwmon);
+ goto err_dev;
+ }
+ return 0;
+
+ err_dev:
+ device_remove_file(&pdev->dev, &dev_attr_name);
+ device_remove_file(&pdev->dev, &dev_attr_pwm1);
+ device_remove_file(&pdev->dev, &dev_attr_pwm1_enable);
+ device_remove_file(&pdev->dev, &dev_attr_fan1_input);
+ err_file:
+ kfree(fan);
+ err_alloc:
+ gpio_free(DNS323C_GPIO_FAN_BIT1);
+ err_gpio:
+ gpio_free(DNS323C_GPIO_FAN_BIT0);
+ return ret;
+}
+
+static int __devexit dns323c_fan_remove(struct platform_device *pdev)
+{
+ struct dns323c_fan *fan = platform_get_drvdata(pdev);
+
+ hwmon_device_unregister(fan->hwmon);
+ device_remove_file(&pdev->dev, &dev_attr_name);
+ device_remove_file(&pdev->dev, &dev_attr_pwm1);
+ device_remove_file(&pdev->dev, &dev_attr_pwm1_enable);
+ device_remove_file(&pdev->dev, &dev_attr_fan1_input);
+ kfree(fan);
+ gpio_free(DNS323C_GPIO_FAN_BIT1);
+ gpio_free(DNS323C_GPIO_FAN_BIT0);
+ return 0;
+}
+
+static struct platform_driver dns323c_fan_driver = {
+ .probe = dns323c_fan_probe,
+ .remove = __devexit_p(dns323c_fan_remove),
+ .driver = {
+ .name = "dns323c-fan",
+ .owner = THIS_MODULE,
+ },
+};
+
+static int __init dns323c_fan_init(void)
+{
+ return platform_driver_register(&dns323c_fan_driver);
+}
+
+static void __exit dns323c_fan_exit(void)
+{
+ platform_driver_unregister(&dns323c_fan_driver);
+}
+
+MODULE_AUTHOR("Benjamin Herrenschmidt <benh@xxxxxxxxxxxxxxxxxxx>");
+MODULE_DESCRIPTION("DNS323 RevC1 Fan control");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:dns323c-fan");
+
+module_init(dns323c_fan_init);
+module_exit(dns323c_fan_exit);
_______________________________________________
lm-sensors mailing list
lm-sensors@xxxxxxxxxxxxxx
http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
