Hi James, On Tue, 27 Apr 2010 17:20:02 -0700, mukund jampala wrote: > Hi Guys, > > I have a this wierd problem. > I have a smbus interfaced eeprom device which I can read/write normally > untill I plug-in the Fiber PCI express card I have. > > If I insert an optical Fiber PCI express card into this x86 board, the smbus > interfaces eeprom which I want to access is no more accessble. I can read > but what is get is Junk. > This happens when I insert only this Card. Not anyother Card. > It does not report an error or so when reading/writing. > > I can still see it in /sys/class/i2c-dev/i2c-0/. > If I probe the bus, the sensors-detect detects the some device at 0x50 but > it happens to be the case where the values I read from the device are not > valid. > However, lm-sensors does not detect the eeprom device irrecpective of where > the PCI card is inserted or not. > (...) Your issue has nothing to do with hardware monitoring, so you're asking on the wrong mailing list. Please try the linux-i2c mailing list instead (see MAINTAINERS). -- Jean Delvare _______________________________________________ lm-sensors mailing list lm-sensors@xxxxxxxxxxxxxx http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
