I'm new to i2c, I have some questions in the end, can you help me explain them to me
root@mpc8313erdb:/root> sensors
lm75-i2c-0-48
Adapter: MPC adapter
temp1: +21.0?C (high = +80.0?C, hyst = +75.0?C)
root@mpc8313erdb:/root> ./i2cdetect -l
i2c-0 i2c MPC adapter I2C adapter
i2c-1 i2c MPC adapter I2C adapter
root@mpc8313erdb:/root> ./i2cdetect 0
WARNING! This program can confuse your I2C bus, cause data loss and worse!
I will probe file /dev/i2c-0.
I will probe address range 0x03-0x77.
Continue? [Y/n] y
0 1 2 3 4 5 6 7 8 9 a b c d e f
00: -- -- -- -- -- -- -- -- -- 0c -- -- --
10: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
20: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
30: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
40: -- -- -- -- -- -- -- -- UU -- -- -- -- -- -- --
50: 50 -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
60: -- -- -- -- -- -- -- -- UU -- -- -- -- -- -- --
70: -- -- -- -- -- -- -- --
root@mpc8313erdb:/root> ./i2cdetect 1
WARNING! This program can confuse your I2C bus, cause data loss and worse!
I will probe file /dev/i2c-1.
I will probe address range 0x03-0x77.
Continue? [Y/n] y
0 1 2 3 4 5 6 7 8 9 a b c d e f
00: -- -- -- -- -- -- -- -- -- -- -- -- --
10: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
20: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
30: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
40: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
50: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
60: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
70: -- -- -- -- -- -- -- --
root@mpc8313erdb:/root>
Q1:use i2cdetect -l, I can see it detects i2c-0 and i2c-0 why "sensors" comand just output lm75-i2c-0-48?
Q2:Use ./i2cdetect 0 it detect three adrees :0x48 0x50 0x68, i just know 0x48 is a temperature sensorshow do I know 0x50 and 0x68?
and from demsg |grep 68 I got
root@mpc8313erdb:/root> dmesg |grep 68
On node 0 totalpages: 32768
Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
Memory: 125268k/131072k available (4072k kernel code, 5656k reserved, 140k data, 126k bss, 188k init)
TCP established hash table entries: 4096 (order: 3, 32768 bytes)
rtc-ds1307 0-0068: rtc core: registered ds1339 as rtc0
rtc-ds1307 0-0068: setting system clock to 2010-04-27 23:41:40 UTC (1272411700)
so 0x68 is rtc device, i can't know 0x50 from demsg,can you show me the way
Q3:Why I got to i2c bus? but why it can't detect one address on bus 1 with ./i2cdetect 1?
Q4:I want to do a full test for the i2c driver of my board, is there some points about the test?
Thanks
Lei
_______________________________________________ lm-sensors mailing list lm-sensors@xxxxxxxxxxxxxx http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
