| Dear gentlemen, I need your help to make lm-sensors work on my PC. I have CUSL2 motherboard and Asus AGP v8200 graphic card both with working thermal chips. However, I cannot get any temperature readings from them in Ubuntu 9.10 Karmic Koala (kernel 2.6.31-21-generic). I installed the latest version of lm_sensors and got the following after sensors-detect: administrator@UBUNTU-INST:~/Downloads/lm_sensors-3.1.2$ sudo sensors-detect # sensors-detect revision 5818 (2010-01-18 17:22:07 +0100) # Board: ASUSTeK Computer INC. CUSL2 This program will help you determine which kernel modules you need to load to use lm_sensors most effectively. It is generally safe and recommended to accept the default answers to all questions, unless you know what you're doing. Some south bridges, CPUs or memory controllers contain embedded sensors. Do you want to scan for them? This is totally safe. (YES/no): y Silicon Integrated Systems SIS5595... No VIA VT82C686 Integrated Sensors... No VIA VT8231 Integrated Sensors... No AMD K8 thermal sensors... No AMD Family 10h thermal sensors... No AMD Family 11h thermal sensors... No Intel Core family thermal sensor... No Intel Atom thermal sensor... No Intel AMB FB-DIMM thermal sensor... No VIA C7 thermal sensor... No VIA Nano thermal sensor... No Some Super I/O chips contain embedded sensors. We have to write to standard I/O ports to probe them. This is usually safe. Do you want to scan for Super I/O sensors? (YES/no): y Probing for Super-I/O at 0x2e/0x2f Trying family `National Semiconductor'... No Trying family `SMSC'... No Trying family `VIA/Winbond/Nuvoton/Fintek'... Yes Found unknown chip with ID 0x8700 (logical device 9 has address 0x290, could be sensors) Probing for Super-I/O at 0x4e/0x4f Trying family `National Semiconductor'... No Trying family `SMSC'... No Trying family `VIA/Winbond/Nuvoton/Fintek'... No Trying family `ITE'... No Some systems (mainly servers) implement IPMI, a set of common interfaces through which system health data may be retrieved, amongst other things. We first try to get the information from SMBIOS. If we don't find it there, we have to read from arbitrary I/O ports to probe for such interfaces. This is normally safe. Do you want to scan for IPMI interfaces? (YES/no): y Probing for `IPMI BMC KCS' at 0xca0... No Probing for `IPMI BMC SMIC' at 0xca8... No Some hardware monitoring chips are accessible through the ISA I/O ports. We have to write to arbitrary I/O ports to probe them. This is usually safe though. Yes, you do have ISA I/O ports even if you do not have any ISA slots! Do you want to scan the ISA I/O ports? (YES/no): y Probing for `National Semiconductor LM78' at 0x290... No Probing for `National Semiconductor LM79' at 0x290... No Probing for `Winbond W83781D' at 0x290... No Probing for `Winbond W83782D' at 0x290... No Lastly, we can probe the I2C/SMBus adapters for connected hardware monitoring devices. This is the most risky part, and while it works reasonably well on most systems, it has been reported to cause trouble on some systems. Do you want to probe the I2C/SMBus adapters now? (YES/no): y Using driver `i2c-i801' for device 0000:00:1f.3: Intel 82801BA ICH2 Next adapter: bt878 #0 [sw] (i2c-0) Do you want to scan it? (yes/NO/selectively): y Client found at address 0x50 Probing for `Analog Devices ADM1033'... No Probing for `Analog Devices ADM1034'... No Probing for `SPD EEPROM'... No Probing for `EDID EEPROM'... No Next adapter: NVIDIA i2c adapter (i2c-1) Do you want to scan it? (YES/no/selectively): y Client found at address 0x50 Probing for `Analog Devices ADM1033'... No Probing for `Analog Devices ADM1034'... No Probing for `SPD EEPROM'... No Probing for `EDID EEPROM'... Yes (confidence 8, not a hardware monitoring chip) Client found at address 0x51 Probing for `Analog Devices ADM1033'... No Probing for `Analog Devices ADM1034'... No Probing for `SPD EEPROM'... No Client found at address 0x52 Probing for `Analog Devices ADM1033'... No Probing for `Analog Devices ADM1034'... No Probing for `SPD EEPROM'... No Client found at address 0x53 Probing for `Analog Devices ADM1033'... No Probing for `Analog Devices ADM1034'... No Probing for `SPD EEPROM'... No Next adapter: NVIDIA i2c adapter (i2c-2) Do you want to scan it? (YES/no/selectively): y Client found at address 0x2d Probing for `Myson MTP008'... No Probing for `National Semiconductor LM78'... No Probing for `National Semiconductor LM79'... No Probing for `National Semiconductor LM80'... No Probing for `National Semiconductor LM85'... No Probing for `National Semiconductor LM96000 or PC8374L'... No Probing for `Analog Devices ADM1027'... No Probing for `Analog Devices ADT7460 or ADT7463'... No Probing for `SMSC EMC6D100 or EMC6D101'... No Probing for `SMSC EMC6D102'... No Probing for `SMSC EMC6D103'... No Probing for `Winbond WPCD377I'... No Probing for `Analog Devices ADT7473'... No Probing for `Analog Devices ADT7476'... No Probing for `Analog Devices ADT7490'... No Probing for `Andigilog aSC7611'... No Probing for `Andigilog aSC7621'... No Probing for `National Semiconductor LM87'... No Probing for `Analog Devices ADM1024'... No Probing for `National Semiconductor LM93'... No Probing for `Winbond W83781D'... Success! (confidence 8, driver `w83781d', other addresses: 0x48 0x49) Probing for `Winbond W83782D'... No Probing for `Winbond W83783S'... No Probing for `Winbond W83791D'... No Probing for `Winbond W83792D'... No Probing for `Winbond W83793R/G'... No Probing for `Nuvoton W83795G/ADG'... No Probing for `Winbond W83627HF'... No Probing for `Winbond W83627EHF'... No Probing for `Winbond W83627DHG/W83667HG/W83677HG'... No Probing for `Asus AS99127F (rev.1)'... No Probing for `Asus AS99127F (rev.2)'... No Probing for `Asus ASB100 Bach'... No Probing for `Winbond W83L784R/AR/G'... No Probing for `Winbond W83L785R/G'... No Probing for `Genesys Logic GL518SM'... No Probing for `Genesys Logic GL520SM'... No Probing for `Genesys Logic GL525SM'... No Probing for `Analog Devices ADM9240'... No Probing for `Dallas Semiconductor DS1780'... No Probing for `National Semiconductor LM81'... No Probing for `Analog Devices ADM1026'... No Probing for `Analog Devices ADM1025'... No Probing for `Philips NE1619'... No Probing for `Texas Instruments AMC6821'... No Probing for `Analog Devices ADM1029'... No Probing for `Analog Devices ADM1030'... No Probing for `Analog Devices ADM1031'... No Probing for `Analog Devices ADM1022'... No Probing for `Texas Instruments THMC50'... No Probing for `VIA VT1211 (I2C)'... No Probing for `ITE IT8712F'... No Probing for `ALi M5879'... No Probing for `SMSC LPC47M15x/192/292/997'... No Probing for `SMSC DME1737'... No Probing for `SMSC SCH5027D-NW'... No Probing for `Fintek F75373S/SG'... No Probing for `Fintek F75375S/SP'... No Probing for `Fintek F75387SG/RG'... No Probing for `Winbond W83791SD'... No Client found at address 0x48 Probing for `National Semiconductor LM75'... No Probing for `Dallas Semiconductor DS75'... No Probing for `National Semiconductor LM77'... No Probing for `Analog Devices ADT7411'... No Probing for `Dallas Semiconductor DS1621/DS1631'... No Probing for `Maxim MAX6650/MAX6651'... No Probing for `National Semiconductor LM73'... No Probing for `National Semiconductor LM92'... No Probing for `National Semiconductor LM76'... No Probing for `Maxim MAX6633/MAX6634/MAX6635'... No Client found at address 0x49 Probing for `National Semiconductor LM75'... No Probing for `Dallas Semiconductor DS75'... No Probing for `National Semiconductor LM77'... No Probing for `Dallas Semiconductor DS1621/DS1631'... No Probing for `National Semiconductor LM73'... No Probing for `National Semiconductor LM92'... No Probing for `National Semiconductor LM76'... No Probing for `Maxim MAX6633/MAX6634/MAX6635'... No Now follows a summary of the probes I have just done. Just press ENTER to continue: Driver `w83781d': * Bus `NVIDIA i2c adapter ' Busdriver `nvidia', I2C address 0x2d (and 0x48 0x49) Chip `Winbond W83781D' (confidence: 8) Do you want to generate /etc/sysconfig/lm_sensors? (yes/NO): y Copy prog/init/lm_sensors.init to /etc/init.d/lm_sensors for initialization at boot time. You should now start the lm_sensors service to load the required kernel modules. administrator@UBUNTU-INST:~/Downloads/lm_sensors-3.1.2$ ----------- I did not have prog/init/lm_sensors.init, so I copied /etc/sysconfig/lm_sensors to /etc/init.d/lm_sensors. I also put a "w87381d" line in /etc/modules (earlier) and tried "sudo modprobe w87381d", which loads module, but in any case for "sensors" command I get: administrator@UBUNTU-INST:~$ sensors No sensors found! Make sure you loaded all the kernel drivers you need. Try sensors-detect to find out which these are. administrator@UBUNTU-INST:~$ Please, could you advise me what to do to make lm-sensors working? |
_______________________________________________ lm-sensors mailing list lm-sensors@xxxxxxxxxxxxxx http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
