Hi all I got Fujitsu mainboard D2778 and I need to run sesnors on Linux Gentoo with kernel 2.6.30 or 2.6.31. I found contribution of Thilo Cestonaro on lm-sensors.org [1]. As far as I understood, this is his config for on that mainboard. 1. http://www.lm-sensors.org/wiki/Configurations/FujitsuTechnologySolutions/D2778%20(A1%2C%20B1%20%2CC1%2C%20X1%2C%20Y1) I tried it and it does not work for me. May anybody confirm that it works with Fujitsu D2778? Here is what i get: # modprobe fschmd # lsmod| grep fsc fschmd 18576 0 hwmon 2528 1 fschmd i2c_core 19832 3 fschmd,i2c_dev,i2c_i801 # sensors No sensors found! Make sure you loaded all the kernel drivers you need. Try sensors-detect to find out which these are. # cat /etc/sensors.conf # Fujitsu Technology Solutions D2778 (A1, B1 ,C1, X1, Y1), "Syleus"-Chip # Contributed by Thilo Cestonaro <thilo.cestonaro@xxxxxxxxxxxxxx> chip "fscsyl-*" # Temperatures label temp1 "CPU Temp" ignore temp2 ignore temp3 label temp4 "Super I/O Temp" label temp5 "Northbridge Temp" # Fans label fan1 "CPU Fan" label fan2 "System FAN2" label fan3 "System FAN3" label fan4 "System FAN4" label fan7 "PSU Fan" # Voltages label in0 "+12V" label in1 "+5V" label in2 "Vbat" ignore in4 label in3 "+3.3V" label in5 "+3.3V-Aux" -- Best regards, Sergey Spiridonov _______________________________________________ lm-sensors mailing list lm-sensors@xxxxxxxxxxxxxx http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
