Hello. This morning, I rebooted my old Debian box to start using its new Kernel 2.6.32 from 2.6.30, but I noticed my lm_sensors didn't show everything (voltages, fan RPMs, etc.) anymore compared to 2.6.30 and earlier. I am using a MSI K8N NEO4-F (MS-7125) motherboard. You can see http://alpha.zimage.com/~ant/antfarm/about/computers.txt for the detailed hardware setup. $ sensors -f acpitz-virtual-0 Adapter: Virtual device temp1: +71.2�F (crit = +206.2�F) k8temp-pci-00c3 Adapter: PCI adapter Core0 Temp: +87.8�F Core1 Temp: +64.4�F Kernel 2.6.30 and earlier used to say something like this: $ sensors -f k8temp-pci-00c3 Adapter: PCI adapter Core0 Temp: +80.6�F ... Adapter: ISA adapter VCore: +1.12 V (min = +2.11 V, max = +2.48 V) +3.3V: +3.28 V (min = +1.46 V, max = +0.21 V) +5V: +4.97 V (min = +0.89 V, max = +0.22 V) +12V: +11.43 V (min = +0.24 V, max = +9.67 V) -12V: +0.72 V (min = -5.37 V, max = +0.63 V) -5V: +5.10 V (min = +1.18 V, max = -7.66 V) V5SB: +5.59 V (min = +0.13 V, max = +0.48 V) VBat: +1.55 V (min = +2.24 V, max = +3.46 V) fan1: 2360 RPM (min = 1622 RPM, div = 4) fan2: 2376 RPM (min = 1985 RPM, div = 4) temp1: +82.4�F (high = +201.2°F, hyst = +221.0°F) sensor = thermistor temp2: +86.0�F (high = +176.0°F, hyst = +167.0°F) sensor = thermistor beep_enable:enabled I even reran sensors-detect command as shown in http://pastie.org/856408 (too long to show in this post/e-mail). I looked at the FAQ and saw http://www.lm-sensors.org/wiki/FAQ/Chapter3#Mysensorshavestoppedworkinginkernel2.6.31 which look like my issue and matches dmesg: http://pastie.org/856424 ... I am scared to use the lax method since it is not recommended. Is there another way to show the datas safely? Or do I have to use this trick or live without them? Thank you in advance. :) -- Quote of the Week: "Not all ants use violence to dominate their world, some use more subtle methods..." --E.O. Wilson on NOVA /\___/\ / /\ /\ \ Phil./Ant @ http://antfarm.ma.cx (Personal Web Site) | |o o| | Ant's Quality Foraged Links: http://aqfl.net \ _ / E-mail: philpi@xxxxxxxxxxxxx or ant@xxxxxxxxxx ( ) _______________________________________________ lm-sensors mailing list lm-sensors@xxxxxxxxxxxxxx http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
