An off-by-one error caused some inputs to not be created by the driver
when they should. TMP421 gets only one input instead of two, TMP422
gets two instead of three, etc. Fix the bug by listing explicitly the
number of inputs each device has.
Signed-off-by: Jean Delvare <khali@xxxxxxxxxxxx>
Cc: Andre Prendel <andre.prendel@xxxxxx>
Cc: stable@xxxxxxxxxx
---
drivers/hwmon/tmp421.c | 14 +++++++-------
1 file changed, 7 insertions(+), 7 deletions(-)
--- linux-2.6.34-rc0.orig/drivers/hwmon/tmp421.c 2010-03-04 13:37:01.000000000 +0100
+++ linux-2.6.34-rc0/drivers/hwmon/tmp421.c 2010-03-04 13:38:51.000000000 +0100
@@ -61,9 +61,9 @@ static const u8 TMP421_TEMP_LSB[4] = {
#define TMP423_DEVICE_ID 0x23
static const struct i2c_device_id tmp421_id[] = {
- { "tmp421", tmp421 },
- { "tmp422", tmp422 },
- { "tmp423", tmp423 },
+ { "tmp421", 2 },
+ { "tmp422", 3 },
+ { "tmp423", 4 },
{ }
};
MODULE_DEVICE_TABLE(i2c, tmp421_id);
@@ -73,7 +73,7 @@ struct tmp421_data {
struct mutex update_lock;
char valid;
unsigned long last_updated;
- int kind;
+ int channels;
u8 config;
s16 temp[4];
};
@@ -107,7 +107,7 @@ static struct tmp421_data *tmp421_update
data->config = i2c_smbus_read_byte_data(client,
TMP421_CONFIG_REG_1);
- for (i = 0; i <= data->kind; i++) {
+ for (i = 0; i < data->channels; i++) {
data->temp[i] = i2c_smbus_read_byte_data(client,
TMP421_TEMP_MSB[i]) << 8;
data->temp[i] |= i2c_smbus_read_byte_data(client,
@@ -166,7 +166,7 @@ static mode_t tmp421_is_visible(struct k
devattr = container_of(a, struct device_attribute, attr);
index = to_sensor_dev_attr(devattr)->index;
- if (data->kind > index)
+ if (index < data->channels)
return a->mode;
return 0;
@@ -271,7 +271,7 @@ static int tmp421_probe(struct i2c_clien
i2c_set_clientdata(client, data);
mutex_init(&data->update_lock);
- data->kind = id->driver_data;
+ data->channels = id->driver_data;
err = tmp421_init_client(client);
if (err)
--
Jean Delvare
_______________________________________________
lm-sensors mailing list
lm-sensors@xxxxxxxxxxxxxx
http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
