Re: ASUS CUSL2: sensors work with 2.6.30, don't with 2.6.33

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hello.

Thanks for the reply.

On Mon, 1 Mar 2010 11:35:48 +0100
Jean Delvare <khali@xxxxxxxxxxxx> wrote:

> * The contents of /proc/ioports
> * The output of "isadump -f 0x290 16"
> * The output of "dmidecode -t baseboard -t system"

Please see the attached text files.

> * The kernel log messages when cycling the i2c-i801 driver ("rmmod
>   i2c-i801 && modprobe i2c-i801" as root)

There are no messages in dmesg or syslog when removing and reloading this
driver in 2.6.30, but in 2.6.33 there are errors:

[  173.468108] ACPI: I/O resource 0000:00:1f.3 [0xe800-0xe80f] conflicts with
ACPI region SM00 [0xe800-0xe806]
[  173.468125] ACPI: If an ACPI driver is available for this device, you
should use it instead of the native driver

How can I solve this?

-- 
With respect,
Roman
# dmidecode 2.9
SMBIOS 2.3 present.

Handle 0x0001, DMI type 1, 25 bytes
System Information
	Manufacturer: System Manufacturer
	Product Name: System Name
	Version: System Version
	Serial Number: SYS-1234567890
	UUID: Not Settable
	Wake-up Type: Power Switch

Handle 0x0002, DMI type 2, 8 bytes
Base Board Information
	Manufacturer: ASUSTeK Computer INC.
	Product Name: CUSL2
	Version: REV 1.xx
	Serial Number: xxxxxxxxxxx

Handle 0x002E, DMI type 32, 11 bytes
System Boot Information
	Status: No errors detected

0000-001f : dma1
0020-0021 : pic1
0040-0043 : timer0
0050-0053 : timer1
0060-0060 : keyboard
0064-0064 : keyboard
0070-0073 : rtc0
0080-008f : dma page reg
00a0-00a1 : pic2
00c0-00df : dma2
00f0-00ff : fpu
0170-0177 : 0000:00:1f.1
  0170-0177 : piix
01f0-01f7 : 0000:00:1f.1
  01f0-01f7 : piix
0376-0376 : 0000:00:1f.1
  0376-0376 : piix
03c0-03df : vga+
03f0-03f1 : pnp 00:03
03f6-03f6 : 0000:00:1f.1
  03f6-03f6 : piix
04d0-04d1 : pnp 00:03
0cf8-0cff : PCI conf1
b000-b01f : 0000:00:1f.4
  b000-b01f : uhci_hcd
b400-b41f : 0000:00:1f.2
  b400-b41f : uhci_hcd
b800-b80f : 0000:00:1f.1
  b800-b80f : piix
d000-dfff : PCI Bus 0000:01
  d800-d83f : 0000:01:0c.0
    d800-d83f : e1000
e400-e47f : 0000:00:1f.0
  e400-e47f : pnp 00:04
    e400-e403 : ACPI PM1a_EVT_BLK
    e404-e405 : ACPI PM1a_CNT_BLK
    e408-e40b : ACPI PM_TMR
    e428-e42b : ACPI GPE0_BLK
e800-e80f : 0000:00:1f.3
  e800-e80f : i801_smbus
ec00-ec3f : 0000:00:1f.0
  ec00-ec3f : pnp 00:04
# isadump -f 0x290 16
WARNING! Running this program can cause system crashes, data loss and worse!
I will probe address range 0x290 to 0x29f.
Continue? [Y/n] y
       0  1  2  3  4  5  6  7  8  9  a  b  c  d  e  f
0290: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
# dmidecode 2.9
SMBIOS 2.3 present.

Handle 0x0001, DMI type 1, 25 bytes
System Information
	Manufacturer: System Manufacturer
	Product Name: System Name
	Version: System Version
	Serial Number: SYS-1234567890
	UUID: Not Settable
	Wake-up Type: Power Switch

Handle 0x0002, DMI type 2, 8 bytes
Base Board Information
	Manufacturer: ASUSTeK Computer INC.
	Product Name: CUSL2
	Version: REV 1.xx
	Serial Number: xxxxxxxxxxx

Handle 0x002E, DMI type 32, 11 bytes
System Boot Information
	Status: No errors detected

0000-001f : dma1
0020-0021 : pic1
0040-0043 : timer0
0050-0053 : timer1
0060-0060 : keyboard
0064-0064 : keyboard
0070-0073 : rtc0
0080-008f : dma page reg
00a0-00a1 : pic2
00c0-00df : dma2
00f0-00ff : fpu
0170-0177 : 0000:00:1f.1
  0170-0177 : piix
01f0-01f7 : 0000:00:1f.1
  01f0-01f7 : piix
0376-0376 : 0000:00:1f.1
  0376-0376 : piix
03c0-03df : vga+
03f0-03f1 : pnp 00:03
03f6-03f6 : 0000:00:1f.1
  03f6-03f6 : piix
04d0-04d1 : pnp 00:03
0cf8-0cff : PCI conf1
b000-b01f : 0000:00:1f.4
  b000-b01f : uhci_hcd
b400-b41f : 0000:00:1f.2
  b400-b41f : uhci_hcd
b800-b80f : 0000:00:1f.1
  b800-b80f : piix
d000-dfff : PCI Bus 0000:01
  d800-d83f : 0000:01:0c.0
    d800-d83f : e1000
e400-e47f : 0000:00:1f.0
  e400-e47f : pnp 00:04
    e400-e403 : ACPI PM1a_EVT_BLK
    e404-e405 : ACPI PM1a_CNT_BLK
    e408-e40b : ACPI PM_TMR
    e428-e42b : ACPI GPE0_BLK
e800-e80f : 0000:00:1f.3
ec00-ec3f : 0000:00:1f.0
  ec00-ec3f : pnp 00:04
# isadump -f 0x290 16
WARNING! Running this program can cause system crashes, data loss and worse!
I will probe address range 0x290 to 0x29f.
Continue? [Y/n] y
       0  1  2  3  4  5  6  7  8  9  a  b  c  d  e  f
0290: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff

Attachment: signature.asc
Description: PGP signature

_______________________________________________
lm-sensors mailing list
lm-sensors@xxxxxxxxxxxxxx
http://lists.lm-sensors.org/mailman/listinfo/lm-sensors

[Index of Archives]     [Linux Kernel]     [Linux Hardware Monitoring]     [Linux USB Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [Yosemite Backpacking]

  Powered by Linux