Hi Karl, On Thu, 14 Jan 2010 06:56:34 -0800, Karl Newman wrote: > I have a 4-year-old Asus A8N-VM CSM motherboard, which has a W83627EHG chip > for hardware monitoring. I recently upgraded to kernel 2.6.31 and ran into > the "Device or Resource busy" error when trying to load my existing > w83627ehf module. After some research, I discovered that I should use the > asus_atk0110 module instead. So, I updated my kernel config to build that > module and it will load with no problem, but "sensors" is ignoring it. When > I modprobe the module, it silently succeeds (it's listed in lsmod) but there > are no messages in dmesg or the syslog to indicate any activity from the > module, which makes me suspect that my board is not currently supported by > this module. I did confirm that it has the atk0110 chip (ls > /sys/bus/acpi/devices shows a ATK0110:00 entry). Am I doing something wrong, > or do you need a DSDT dump to support my motherboard, or...? Which version of lm-sensors are you running? "sensors -v" will tell you. Minimum version for asus_atk0110 support is 3.1.0, as documented on: http://www.lm-sensors.org/wiki/Devices -- Jean Delvare http://khali.linux-fr.org/wishlist.html _______________________________________________ lm-sensors mailing list lm-sensors@xxxxxxxxxxxxxx http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
