On Sun, 6 Dec 2009 16:51:43 +0100, MC Matti wrote: > 2009/12/3 Jean Delvare <khali@xxxxxxxxxxxx>: > > You might as well take your chance and force the lm90 driver to treat > > your chip as a lm86: > > > > modprobe lm90 force_lm86=0,0x4c. > > > > Now if your house burn, I'm not responsible, OK? ;) > > > :) > I couldn't resist. > Up to now the MoBo hasn't exploded or catched fire etc... > But it may happen. > Heres what I did: > > root@localhost:~# modprobe lm90 force_lm86=0,0x4c > root@localhost:~# dmesg | tail -2 > [ 18.363869] i2c /dev entries driver > [ 22.060013] eth0: no IPv6 routers present > > root@localhost:~# sensors > lm86-i2c-0-4c > Adapter: SMBus nForce2 adapter at 4d00 > temp1: +44.0°C (low = -40.0°C, high = +70.0°C) > (crit = +85.0°C, hyst = +75.0°C) > temp2: +57.9°C (low = -40.0°C, high = +70.0°C) > (crit = +110.0°C, hyst = +100.0°C) Looks reasonable. temp1 is an internal sensor, so it gives you the board temperature. temp2 is remote, that would be the CPU temperature. Configuration file would be: chip "lm86-i2c-*-4c" label temp1 "M/B Temp" label temp2 "CPU Temp" Let us know if you notice anything wrong later. When we have proper W83L771* support, we'll let you know. -- Jean Delvare http://khali.linux-fr.org/wishlist.html _______________________________________________ lm-sensors mailing list lm-sensors@xxxxxxxxxxxxxx http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
