Hi Justin, On 13/14 Oct 2009, Justin Piszcz wrote: > # uname -a > Linux box 2.6.31.3 #2 SMP Wed Oct 14 04:55:36 EDT 2009 x86_64 GNU/Linux > > I have a DP55KG motherboard, it says Ibex support was added here: > http://www.lm-sensors.org/changeset/5375 > > # sensors > No sensors found! > Make sure you loaded all the kernel drivers you need. > Try sensors-detect to find out which these are. > > I have all of the modules compiled into the kernel and sensors-detect does > not find anything. > > 00:1f.3 SMBus: Intel Corporation Ibex Peak SMBus Controller (rev 05) > > Any ideas? The "Ibex support" in question only refers to the SMBus controller, not to sensors directly. > I tried w83627ehf, to no avail: > > # modprobe w83627ehf > FATAL: Error inserting w83627ehf > (/lib/modules/2.6.31.3/kernel/drivers/hwmon/w83627ehf.ko): No such device > > (...) > With debugging enabled: > > [56208.376451] w83627ehf: unsupported chip ID: 0xb473 > > Is there anything else needed from me/info about the board or once this ID > is added into the kernel/src/etc it will work properly? We have never heard of this chip ID. This must be a brand new Winbond/Nuvoton Super-I/O chip. Please look at the motherboard, search for the Super-I/O and report the top marking. You may also find its name in the user manual (but the top marking is even more reliable.) -- Jean Delvare _______________________________________________ lm-sensors mailing list lm-sensors@xxxxxxxxxxxxxx http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
