As kind is now hard-coded to -1, there is room for code clean-ups.
Signed-off-by: Jean Delvare <khali@xxxxxxxxxxxx>
---
drivers/hwmon/lm83.c | 81 ++++++++++++++++----------------------------------
1 file changed, 26 insertions(+), 55 deletions(-)
--- linux-2.6.32-rc3.orig/drivers/hwmon/lm83.c 2009-10-06 10:33:15.000000000 +0200
+++ linux-2.6.32-rc3/drivers/hwmon/lm83.c 2009-10-06 11:44:50.000000000 +0200
@@ -1,7 +1,7 @@
/*
* lm83.c - Part of lm_sensors, Linux kernel modules for hardware
* monitoring
- * Copyright (C) 2003-2008 Jean Delvare <khali@xxxxxxxxxxxx>
+ * Copyright (C) 2003-2009 Jean Delvare <khali@xxxxxxxxxxxx>
*
* Heavily inspired from the lm78, lm75 and adm1021 drivers. The LM83 is
* a sensor chip made by National Semiconductor. It reports up to four
@@ -295,69 +295,40 @@ static int lm83_detect(struct i2c_client
struct i2c_board_info *info)
{
struct i2c_adapter *adapter = new_client->adapter;
- const char *name = "";
+ const char *name;
+ u8 man_id, chip_id;
if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA))
return -ENODEV;
- /* Now we do the detection and identification. A negative kind
- * means that the driver was loaded with no force parameter
- * (default), so we must both detect and identify the chip
- * (actually there is only one possible kind of chip for now, LM83).
- * A zero kind means that the driver was loaded with the force
- * parameter, the detection step shall be skipped. A positive kind
- * means that the driver was loaded with the force parameter and a
- * given kind of chip is requested, so both the detection and the
- * identification steps are skipped. */
-
- /* Default to an LM83 if forced */
- if (kind == 0)
- kind = lm83;
-
- if (kind < 0) { /* detection */
- if (((i2c_smbus_read_byte_data(new_client, LM83_REG_R_STATUS1)
- & 0xA8) != 0x00) ||
- ((i2c_smbus_read_byte_data(new_client, LM83_REG_R_STATUS2)
- & 0x48) != 0x00) ||
- ((i2c_smbus_read_byte_data(new_client, LM83_REG_R_CONFIG)
- & 0x41) != 0x00)) {
- dev_dbg(&adapter->dev,
- "LM83 detection failed at 0x%02x.\n",
- new_client->addr);
- return -ENODEV;
- }
+ /* Detection */
+ if ((i2c_smbus_read_byte_data(new_client, LM83_REG_R_STATUS1) & 0xA8) ||
+ (i2c_smbus_read_byte_data(new_client, LM83_REG_R_STATUS2) & 0x48) ||
+ (i2c_smbus_read_byte_data(new_client, LM83_REG_R_CONFIG) & 0x41)) {
+ dev_dbg(&adapter->dev, "LM83 detection failed at 0x%02x\n",
+ new_client->addr);
+ return -ENODEV;
}
- if (kind <= 0) { /* identification */
- u8 man_id, chip_id;
-
- man_id = i2c_smbus_read_byte_data(new_client,
- LM83_REG_R_MAN_ID);
- chip_id = i2c_smbus_read_byte_data(new_client,
- LM83_REG_R_CHIP_ID);
-
- if (man_id == 0x01) { /* National Semiconductor */
- if (chip_id == 0x03) {
- kind = lm83;
- } else
- if (chip_id == 0x01) {
- kind = lm82;
- }
- }
-
- if (kind <= 0) { /* identification failed */
- dev_info(&adapter->dev,
- "Unsupported chip (man_id=0x%02X, "
- "chip_id=0x%02X).\n", man_id, chip_id);
- return -ENODEV;
- }
- }
+ /* Identification */
+ man_id = i2c_smbus_read_byte_data(new_client, LM83_REG_R_MAN_ID);
+ if (man_id != 0x01) /* National Semiconductor */
+ return -ENODEV;
- if (kind == lm83) {
+ chip_id = i2c_smbus_read_byte_data(new_client, LM83_REG_R_CHIP_ID);
+ switch (chip_id) {
+ case 0x03:
name = "lm83";
- } else
- if (kind == lm82) {
+ break;
+ case 0x01:
name = "lm82";
+ break;
+ default:
+ /* identification failed */
+ dev_info(&adapter->dev,
+ "Unsupported chip (man_id=0x%02X, chip_id=0x%02X)\n",
+ man_id, chip_id);
+ return -ENODEV;
}
strlcpy(info->type, name, I2C_NAME_SIZE);
--
Jean Delvare
_______________________________________________
lm-sensors mailing list
lm-sensors@xxxxxxxxxxxxxx
http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
