Hi,
I'm trying to figure this out, but it's beyond me. I have a Tyan S7025
motherboard which has a w83793g. I've had a quick scan of the w83793 code and
the datasheet and it seems that the chipset only supports 6 temp sensors and
10 voltage sensors. So, I'm lost trying to figure out how Tyan have managed to
squeeze 7 temp sensors and 13 voltage sensors out of it. I've attached my
current sensors config, sensors readings and the bios screen readings. Do I
have a later revision of the w83793? Or from where is the bios obtaining the
extra sensors readings?
Regards
Clive
--
Clive Messer <clive@xxxxxxxxxxxxxxxxx>
01 CPU0 below Tmax 57C OK
02 CPU1 below Tmax 59C OK
05 RT3 74C Alert
06 RT4 57C OK
07 RT5 49C OK
0A CPU0 VCORE 0.976V OK
0B CPU1 VCORE 0.968V OK
16 CPU0 VTT 1.152V OK
15 CPU1 VTT 1.144V OK
12 5V 4.872V OK
11 5VSB 4.848V OK
0F 12V 11.904V OK
0E 3V 3.360V OK
10 VBAT 3.136V OK
0D IOH 1.1V 1.072V OK
0C ICH 1.5V 1.504V OK
14 CPU0 DDR3 1.5V 1.528V OK
13 CPU1 DDR3 1.5V 1.528V OK
20 CPU0 FAN 0RPM OK
21 CPU1 FAN 0RPM OK
26 REAR FAN1 0RPM OK
23 REAR FAN2 0RPM OK
22 FRONT FAN1 1440RPM OK
24 FRONT FAN2 0RPM OK
25 FRONT FAN3 0RPM OK
50 POWER1 0W Alert
w83793-i2c-0-2f
Adapter: SMBus I801 adapter at 0400
VCoreA: +0.91 V (min = +0.75 V, max = +1.30 V)
VCoreB: +0.92 V (min = +0.75 V, max = +1.30 V)
in2: +1.08 V (min = +0.00 V, max = +2.05 V)
in3: +1.50 V (min = +0.00 V, max = +4.08 V)
in4: +1.07 V (min = +0.00 V, max = +4.08 V)
+3.3V: +3.36 V (min = +3.14 V, max = +3.47 V)
+12V: +11.90 V (min = +10.85 V, max = +13.25 V)
+5V: +5.02 V (min = +4.52 V, max = +5.50 V)
5VSB: +5.00 V (min = +4.52 V, max = +5.50 V)
VBAT: +3.14 V (min = +2.70 V, max = +3.30 V)
fan1: 0 RPM (min = 0 RPM)
fan2: 0 RPM (min = 0 RPM)
fan3: 0 RPM (min = 0 RPM)
fan4: 0 RPM (min = 0 RPM)
fan5: 0 RPM (min = 0 RPM)
PS Fan: 1486 RPM (min = 0 RPM)
fan7: 0 RPM (min = 0 RPM)
fan8: 0 RPM (min = 0 RPM)
fan9: 0 RPM (min = 0 RPM)
fan10: 0 RPM (min = 0 RPM)
fan11: 0 RPM (min = 0 RPM)
fan12: 0 RPM (min = 0 RPM)
CPU1 Temp: +37.5째C (high = +100.0째C, hyst = +95.0째C) sensor = Intel PECI
CPU2 Temp: +37.8째C (high = +100.0째C, hyst = +95.0째C) sensor = Intel PECI
temp5: +77.0째C (high = +100.0째C, hyst = +95.0째C) sensor = thermistor
temp6: +57.0째C (high = +100.0째C, hyst = +95.0째C) sensor = thermistor
beep_enable:disabled
##
## Tyan S7025
##
chip "w83793-*"
label in0 "VCoreA"
label in1 "VCoreB"
label temp1 "CPU1 Temp"
label temp2 "CPU2 Temp"
label in5 "+3.3V"
label in6 "+12V"
label in7 "+5V"
label in7 "+5VSB"
label in9 "VBAT"
label fan6 "PS Fan"
compute in6 @*12,@/12
set in0_min 0.75
set in0_max 1.3
set in1_min 0.75
set in1_max 1.3
set in5_min 3.3 * 0.95
set in5_max 3.3 * 1.05
set in6_min 12.0 * 0.9
set in6_max 12.0 * 1.1
set in7_min 5.0 * 0.95
set in7_max 5.0 * 1.05
set in8_min 5.0 * 0.95
set in8_max 5.0 * 1.05
_______________________________________________
lm-sensors mailing list
lm-sensors@xxxxxxxxxxxxxx
http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
