Jean Delvare wrote: > On Tue, 15 Sep 2009 18:41:41 +0200, Martin MOKREJŠ wrote: >> Jean Delvare wrote: >>> On Tue, 15 Sep 2009 17:43:19 +0200, Martin MOKREJŠ wrote: >>>> $ gzip -dc /proc/config.gz | grep THERMAL >>>> CONFIG_ACPI_THERMAL=y >>>> CONFIG_THERMAL=y >>>> CONFIG_THERMAL_HWMON=y >>>> $ gzip -dc /proc/config.gz | grep ATK >>>> CONFIG_KEYBOARD_ATKBD=y >>>> CONFIG_SENSORS_ATK0110=y >>>> $ >>>> >>>> These I have already in the kernel, so I can drop the whole SMbus thing? >>> Yes. >> Ooops, are we talking about I2C_I801=N, I2C=N or SENSORS_DS1621=N? ;-) > > ENSORS_DS1621=N and I2C_I801=N, yes. I2C=N, bad idea, you might need > I2C support for something else. $ sensors max6657-i2c-4-4c Adapter: SMBus I801 adapter at e800 M/B Temp: +39.1°C (low = -55°C, high = +127°C) CPU Temp: +49.2°C (low = +48.0°C, high = +62.0°C) M/B Crit: +85°C (hyst = +75°C) CPU Crit: +75°C (hyst = +65°C) $ > >> Actually I had SENSORS_LM90=Y as it was also proposed by sensors-detect. >> That one was also mis-detected? > > I can't tell as your sensors-detect report was incomplete (with ds1621 > loaded, sensors-detect can't probe the chip). I'm not sure why you are > hard-building all the drivers that way, BTW, it makes investigating > problems much harder. Probably the LM90 detection was correct, as these > chips are much more reliably detected than the DS1621. > > Anyway, as further kernels say that ACPI is conflicting with the native > SMBus controller driver, the only safe bet is to drop i2c-i801 and go > with the ACPI thermal driver instead. So doing that lm90 driver does not find any hardware chip and sensors do not see therefore anything either. modprob-ing ATK0110 driver surprisingly doesn't give anything either (lsmod reports it is unused and nothing new in dmesg). Dropping i2c-i801 seems like a bad idea. ;-) What do you propose now? Some debug flags for insmod when inserting the atk* driver? M. _______________________________________________ lm-sensors mailing list lm-sensors@xxxxxxxxxxxxxx http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
