Hello,
I've been asking for help at superuser.com, but nobody could help me.
I've tried the last version of sensors-detect script, but it just gives me the same modules to load up...
This is my computer:
Intel Core2duo e4700
Motherboard Intel DG45ID
GeForce 9800 GT
2 HD's, one SATA and one PATA with adapter
It tolds me to load i2c-i801, lm85 and coretemp modules. And so I did.
I can see properly my Videocard temp (I think it's provided by nvidia, right?) and both HD (but sometimes the IDE disk simply goes 0°). My CPU temps looks correct too.
But all the temps from my motherboard are zeroed.
Take a look at the full output:
igoru[~]$ sensors
lm85-i2c-0-2e
Adapter: SMBus I801 adapter at e000
V1.5: +0.00 V (min = +0.00 V, max = +3.32 V)
VCore: +0.00 V (min = +0.00 V, max = +2.99 V)
V3.3: +0.00 V (min = +0.00 V, max = +4.38 V)
V5: +0.00 V (min = +0.00 V, max = +6.64 V)
V12: +0.00 V (min = +0.00 V, max = +15.94 V)
CPU_Fan: 0 RPM (min = 0 RPM) ALARM
fan2: 0 RPM (min = 0 RPM) ALARM
fan3: 0 RPM (min = 0 RPM) ALARM
fan4: 0 RPM (min = 0 RPM) ALARM
CPU Temp: +0.0°C (low = -127.0°C, high = +127.0°C)
Board Temp: +0.0°C (low = -127.0°C, high = +127.0°C)
Remote Temp: +0.0°C (low = -127.0°C, high = +127.0°C)
cpu0_vid: +2.050 V
coretemp-isa-0000
Adapter: ISA adapter
Core 0: +57.0°C (high = +78.0°C, crit = +100.0°C)
coretemp-isa-0001
Adapter: ISA adapter
Core 1: +57.0°C (high = +78.0°C, crit = +100.0°C)
What should I do?
Thank you in advance,
Programador Web
_______________________________________________ lm-sensors mailing list lm-sensors@xxxxxxxxxxxxxx http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
