Hi, everyone, I have this strange issue with the lm-sensors, the output of sensors for my core i7 on ASUS p6t mobo is very wired. It report CPU temp as 50C, way more than the core temp. Since core-temp is normally always higher than cpu temp, as shown in windows the cpu temp is barely 40C. This is completely unusual. I open the case the cpu heatsink is almost cold. The problem caused by this is that the fan is constantly running at its maximum speed, since it "thinks" the cpu is hot. I am really confused, is the CPU really HOT? (I doubt) or is it simply lm-sensors is giving non-senses out put? Is this rummer really true that core i7 runner hotter for some strange reason in linux than in windows? Please help, and info is appreciated. Code: atk0110-acpi-0 Adapter: ACPI interface Vcore Voltage: +0.94 V (min = +0.80 V, max = +1.60 V) +3.3 Voltage: +3.28 V (min = +2.97 V, max = +3.63 V) +5 Voltage: +5.14 V (min = +4.50 V, max = +5.50 V) +12 Voltage: +12.19 V (min = +10.20 V, max = +13.80 V) CPU FAN Speed: 1171 RPM (min = 600 RPM) CHASSIS1 FAN Speed: 0 RPM (min = 600 RPM) CHASSIS2 FAN Speed: 0 RPM (min = 600 RPM) POWER FAN Speed: 0 RPM (min = 0 RPM) CPU Temperature: +50.0?C (high = +60.0?C, crit = +75.0?C) MB Temperature: +47.0?C (high = +45.0?C, crit = +75.0?C) coretemp-isa-0000 Adapter: ISA adapter Core 0: +40.0?C (high = +80.0?C, crit = +100.0?C) coretemp-isa-0001 Adapter: ISA adapter Core 1: +36.0?C (high = +80.0?C, crit = +100.0?C) coretemp-isa-0002 Adapter: ISA adapter Core 2: +40.0?C (high = +80.0?C, crit = +100.0?C) coretemp-isa-0003 Adapter: ISA adapter Core 3: +37.0?C (high = +80.0?C, crit = +100.0?C) coretemp-isa-0004 Adapter: ISA adapter Core 4: +40.0?C (high = +80.0?C, crit = +100.0?C) coretemp-isa-0005 Adapter: ISA adapter Core 5: +36.0?C (high = +80.0?C, crit = +100.0?C) coretemp-isa-0006 Adapter: ISA adapter Core 6: +40.0?C (high = +80.0?C, crit = +100.0?C) coretemp-isa-0007 Adapter: ISA adapter Core 7: +37.0?C (high = +80.0?C, crit = +100.0?C) w83627ehf-isa-0290 Adapter: ISA adapter Vcore: +0.94 V (min = +0.00 V, max = +1.74 V) in1: +1.74 V (min = +0.02 V, max = +0.01 V) ALARM AVCC: +3.31 V (min = +2.98 V, max = +3.63 V) VCC: +3.28 V (min = +2.98 V, max = +3.63 V) in4: +1.71 V (min = +0.00 V, max = +1.06 V) ALARM in5: +2.04 V (min = +0.06 V, max = +1.15 V) ALARM in6: +1.62 V (min = +0.13 V, max = +1.02 V) ALARM 3VSB: +3.36 V (min = +2.98 V, max = +3.63 V) Vbat: +3.25 V (min = +2.70 V, max = +3.30 V) in9: +0.00 V (min = +1.60 V, max = +0.03 V) ALARM fan1: 0 RPM (min = 21093 RPM, div = 64) ALARM fan2: 1188 RPM (min = 0 RPM, div = 16) ALARM fan3: 0 RPM (min = 21093 RPM, div = 64) ALARM fan4: 0 RPM (min = 21093 RPM, div = 64) ALARM fan5: 0 RPM (min = 10546 RPM, div = 128) ALARM temp1: +47.0?C (high = +5.0?C, hyst = +10.0?C) ALARM sensor = thermistor temp2: +50.0?C (high = +80.0?C, hyst = +75.0?C) sensor = diode temp3: -3.0?C (high = +80.0?C, hyst = +75.0?C) sensor = thermistor cpu0_vid: +0.000 V
