Hi Jonathan, Thanks for the relentless help. I have adapted the driver to my platform by changing the following: gpio_request(), gpio_get/gpio_set() to thier counterparts on my platform. > couple of mfp defines to enable the gpios. (how you do this is platform dependent) By this i guess, you mean configuring the gpios, and defining the I/O characteristics for each of the signals. >mework there are some bits and bobs related So after doing all the porting, i was able to compile it as an loadable kernel module. I tried insmod and here;s what i get: ~$ insmod sht15.ko regulator: Unable to get requested regulator: vcc sht15 sht15: Command not acknowledged ~$ Do i have to play with any timings related to the part. I have a SHT11 , but i was assuming that there is no significant difference. Although something may have gone wrong when i ported. -Alfred.
