>From: J.I. Cameron [mailto:jic23 at hermes.cam.ac.uk] On Behalf Of Jonathan Cameron >Mike Frysinger wrote: >> On Thu, Jul 2, 2009 at 13:38, Jonathan Cameron wrote: >> >>> One interesting thing I just came across whilst searching lkml for >>> your post to reply to, was that Mike Frysinger submited a patch >>> adding some board support for an adx34x driver to bf548-ezkit. >>> I've not seen any sign of this anywhere else as yet (it hasn't >>> hit the input list which would be the obvious place) I've copied in >>> both people who signed off. Michael or Mike able to give us more info? >>> >> >> that's because we're still in the process of making sure it is stable. >> I2C is a pita to work with. >> >http://git.kernel.org/?p=linux/kernel/git/vapier/blackfin.git;a=commitd iff;h=43d4cabbdeb5c24f84b159c5 >dc369c1a60844a48 >> >> the advantage here is that we have been testing our driver with actual >> hardware ... >> >Cheat ;) > >Looks like a nice driver, see what you mean about the i2c fun and games >you are having >though. >I'm particularly interested in your use of the fifo: > >I've only had a quick look, but assuming I read it right, you are using >the fifo >with a watermark of 0 then spitting out 3 separate events for every >element in it. >Basically a data ready response unless you fail to read in time. Seems >like a sensible >approach with this particular chip in input type applications. We fully use the FIFO - the link Mike sent around was the initial checkin. After that I fixes some bugs and added functionality. BTW I also implemented the Watermark feature. http://docs.blackfin.uclinux.org/doku.php?id=linux-kernel:drivers:adxl34 x > >Does this work well even at the higher rates? Seems a fair bit of >overhead but I guess >if everything is quick enough it doesn't really matter. Does this act as >a clean means >of ensuring you get a consistent set of values? It works pretty well - the driver supports both SPI and I2C interface. With SPI it's no problem to even use the 3200HZ sample rate. See the comments in our documentation page. 400kHz I2C clock is the limiting factor when using the I2C interface. Best regards, Michael > >Thanks, > >Jonathan
