Hello all! Related to the below question: At home, I run lm-sensors 3.1.0 on kernel 2.6.26. There are some entries below /sys/devices/platform for the it8716 chip on my motherboard. Do the "files" below this directory provide the same raw values that libsensors is using? Thanks for your help! On Mon, 22 Jun 2009, Matt Roberds wrote: > Hello all! > > Quick version: If I don't know the right values to plug into the > "compute" line for voltages in sensors.conf, what should I log so that > when I find out the right values, I can go back through the log and > compute the voltages? > > Long version: > > At work, we build a product that has a rackmount Linux PC plugged into > some other hardware. I've gotten lm-sensors to run on the PC, and I > get the expected number of voltages, fan speeds, and temperatures. I > even mostly believe the fan speeds and temperatures, but I'm not sure > about some of the voltages; I'm not sure what scaling resistors the > motherboard manufacturer is using. I can ask the manufacturer, and > experience tells me that they will probably give me the right answer, > but it takes a few rounds of emails to get there. > > One copy of the system has to go in for several days' worth of > environmental testing: hot, cold, humidity, etc. There is independent > measurement and control of all this stuff, but it would be nice to know > what the PC is seeing internally during all of this. The wrinkle is > that I can configure the PC however I want, but once the test starts, I > can't change the configuration. Of course, the test has to start a few > days before I expect to get a good answer from the manufacturer about > how the motherboard is wired. > > I am assuming that it is possible to log the raw data, or the (possibly > incorrectly-scaled) "cooked" data, and then go back later and correct > the computation. I realize I probably won't be able to "replay" the > wrong data through sensors; the correction will have to be done in a > script or spreadsheet or something like that. (I can have the system > under test copy the logged raw data to another computer during the > test, so I can do computations on the other computer.) > > So, the question: What values should I log so that I can do this? > Should I have a null sensors.conf and log the output of sensors? Or > should I put in sensors.conf compute lines that do nothing to the raw > value (for instance, "compute in1 @*1, @*1") and log the output of > sensors? Or should I maybe grab something directly out of /proc or > /sys or somewhere? Matt Roberds
