I'm trying to obtain the VID on an HP notebook with a Core Duo CPU. Under Windows, I could see the voltage, speed, temperature, etc. but with lm-sensors all I'm able to see is the temperature. I have run sensors-detect to no avail. Can anyone provide any advice to me on how to get this working? Thanks for your time and help! Here is the output from sensors-detect: # sensors-detect revision 5249 (2008-05-11 22:56:25 +0200) > > This program will help you determine which kernel modules you need > to load to use lm_sensors most effectively. It is generally safe > and recommended to accept the default answers to all questions, > unless you know what you're doing. > > We can start with probing for (PCI) I2C or SMBus adapters. > Do you want to probe now? (YES/no): yes > Probing for PCI bus adapters... > Use driver `i2c-i801' for device 0000:00:1f.3: Intel 82801G ICH7 > > We will now try to load each adapter module in turn. > Load `i2c-i801' (say NO if built into your kernel)? (YES/no): yes > Module loaded successfully. > If you have undetectable or unsupported I2C/SMBus adapters, you can have > them scanned by manually loading the modules before running this script. > > To continue, we need module `i2c-dev' to be loaded. > Do you want to load `i2c-dev' now? (YES/no): yes > Module loaded successfully. > > We are now going to do the I2C/SMBus adapter probings. Some chips may > be double detected; we choose the one with the highest confidence > value in that case. > If you found that the adapter hung after probing a certain address, > you can specify that address to remain unprobed. > > Next adapter: SMBus I801 adapter at 18e0 (i2c-0) > Do you want to scan it? (YES/no/selectively): yes > Client found at address 0x50 > Probing for `Analog Devices ADM1033'... No > Probing for `Analog Devices ADM1034'... No > Probing for `SPD EEPROM'... Yes > (confidence 8, not a hardware monitoring chip) > Probing for `EDID EEPROM'... No > > Some chips are also accessible through the ISA I/O ports. We have to > write to arbitrary I/O ports to probe them. This is usually safe though. > Yes, you do have ISA I/O ports even if you do not have any ISA slots! > Do you want to scan the ISA I/O ports? (YES/no): yes > Probing for `National Semiconductor LM78' at 0x290... No > Probing for `National Semiconductor LM78-J' at 0x290... No > Probing for `National Semiconductor LM79' at 0x290... No > Probing for `Winbond W83781D' at 0x290... No > Probing for `Winbond W83782D' at 0x290... No > Probing for `IPMI BMC KCS' at 0xca0... No > Probing for `IPMI BMC SMIC' at 0xca8... No > > Some Super I/O chips may also contain sensors. We have to write to > standard I/O ports to probe them. This is usually safe. > Do you want to scan for Super I/O sensors? (YES/no): yes > Probing for Super-I/O at 0x2e/0x2f > Trying family `National Semiconductor'... No > Trying family `SMSC'... No > Trying family `VIA/Winbond/Fintek'... No > Trying family `ITE'... No > Probing for Super-I/O at 0x4e/0x4f > Trying family `National Semiconductor'... No > Trying family `SMSC'... No > Trying family `VIA/Winbond/Fintek'... No > Trying family `ITE'... No > > Some south bridges, CPUs or memory controllers may also contain > embedded sensors. Do you want to scan for them? (YES/no): yes > Silicon Integrated Systems SIS5595... No > VIA VT82C686 Integrated Sensors... No > VIA VT8231 Integrated Sensors... No > AMD K8 thermal sensors... No > AMD K10 thermal sensors... No > Intel Core family thermal sensor... Success! > (driver `coretemp') > Intel AMB FB-DIMM thermal sensor... No > > Now follows a summary of the probes I have just done. > Just press ENTER to continue: > > Driver `coretemp' (should be inserted): > Detects correctly: > * Chip `Intel Core family thermal sensor' (confidence: 9) > > I will now generate the commands needed to load the required modules. > Just press ENTER to continue: > > To load everything that is needed, add this to /etc/modules: > > #----cut here---- > # Chip drivers > coretemp > #----cut here---- > -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.lm-sensors.org/pipermail/lm-sensors/attachments/20090614/65ffb367/attachment.html
