Asus M3A78-C< - here is the RIGHT sensors3.conf lines fot IT87

martind at noxam.com (martind at noxam.com) · Thu, 11 Jun 2009 00:55:06 -0400

	Hi all! 

	After couple hours... figured out the config for an ASUS M3A78-CM
motherboard
	Here you go!
	chip "it87-*" "it8712-*"

# The values below have been tested on Asus M3A78-CM motherboards.

    label in0 "VCore 1"
    ignore in1
    label in2 "+3.3V"
    ignore in3
    label in4 "+12V"
    label in5 "+5V"
    ignore in6
    ignore in7
    label in8 "VBat"

	    compute in4 ((28/10) +1)*@  , @/((28/10) +1)
    compute in5 @*(1+(22/10)),  @/(1+(22/10))

	    set in0_min  1.30 * 0.95
    set in0_max  1.30 * 1.05
    set in2_min  3.3 * 0.95
    set in2_max  3.3 * 1.05
    set in4_min   12 * 0.95
    set in4_max   12 * 1.05
    set in5_min    5 * 0.95
    set in5_max    5 * 1.05

	    set temp1_type 2
    set temp2_type 2
    set temp3_type 3
    ignore temp3

	    label temp1       "CPU Temp"
    label temp2       "M/B Temp"

_____________________________________

	remove everything else!

	here is the output from sensors:
	frodo:/sys/class/hwmon/hwmon1/device # sensors
atk0110-acpi-0
Adapter: ACPI interface
Vcore Voltage:     +1.30 V  (min =  +0.85 V, max =  +1.60 V)
 +3.3 Voltage:     +3.28 V  (min =  +2.97 V, max =  +3.63 V)
 +5 Voltage:       +4.97 V  (min =  +4.50 V, max =  +5.50 V)
 +12 Voltage:     +12.22 V  (min = +10.20 V, max = +13.80 V)
CPU FAN Speed:    2295 RPM  (min =  600 RPM)
CHASSIS FAN Speed:   0 RPM  (min =  600 RPM)
POWER FAN Speed:  1313 RPM  (min =  600 RPM)
CPU Temperature:   +48.0&deg;C  (high = +60.0&deg;C, crit =
+95.0&deg;C)
MB Temperature:    +35.0&deg;C  (high = +45.0&deg;C, crit =
+95.0&deg;C)

it8712-isa-0290
Adapter: ISA adapter
VCore 1:     +1.30 V  (min =  +1.23 V, max =  +1.36 V)
+3.3V:       +3.28 V  (min =  +3.14 V, max =  +3.47 V)
+12V:       +12.22 V  (min = +11.37 V, max = +12.59 V)
+5V:         +4.97 V  (min =  +4.76 V, max =  +5.27 V)
VBat:        +3.20 V
fan1:       2295 RPM  (min =    0 RPM)
fan2:          0 RPM  (min =    0 RPM)
fan3:       1313 RPM  (min =    0 RPM)
CPU Temp:    +48.0&deg;C  (low  =  -1.0&deg;C, high =  -5.0&deg;C) 
sensor = thermistor
M/B Temp:    +35.0&deg;C  (low  =  -1.0&deg;C, high = +127.0&deg;C) 
sensor = thermistor
cpu0_vid:   +1.550 V

frodo:/sys/class/hwmon/hwmon1/device #
	Best Regards
	Martin Desormeaux

	a.k.a Neo2048
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.lm-sensors.org/pipermail/lm-sensors/attachments/20090611/0908717c/attachment.html 