Thanks, That was very helpful, I've just send a patch adding Hades support to Jean. And I'm looking forward to some more info about the DMI tables for in3-5 Regards, Hans On 03/27/2009 03:03 PM, Cestonaro, Thilo wrote: > Hey Hans, > > thats correct. The watchdog stuff has changed too. Sorry for that mistake. > > 0x20 => 5V Actual > 0x21 => 12V Actual > 0x22 => Bat Actual > > 0x28 => WD Control > 0x29 => WD Status > 0x2A => WD PreSet > > As syleus has it (except the new voltages). > I've double checked the rest against the fschmd.c I got from you. The rest is correct! > > > DMI in3-in5: > I'm checking the stuff and I think you'll get new informations on Monday. > Anyway, what BIOS Ver. do you have? Perhaps the voltages are missing there. > > Ciao Thilo > > -----Original Message----- > From: Hans de Goede [mailto:hdegoede at redhat.com] > Sent: Friday, March 27, 2009 1:19 PM > To: Cestonaro, Thilo > Cc: Jean Delvare; LM Sensors > Subject: Urgent: need some more info about the Hadess IC > > Hi, > > Some time ago we mailed about the Hadess management IC. You said it was 100% identical to the Heimdall except for the voltage registers, which should be 0x20 - 0x22. > > This cannot be right, as this would give us the following register definitions for the Hadess: > > #define FSCHMD_REG_WDOG_PRESET 0x28 > #define FSCHMD_REG_WDOG_STATE 0x23 > #define FSCHMD_REG_WDOG_CONTROL 0x21 > > static const u8 FSCHMD_REG_VOLT[3] = { 0x20, 0x21, 0x22 }; > > Notice that register 0x21 now is seen as both a voltage register and the watchdog control register, which cannot be right. Can you please check if the watchdog registers perhaps have changed with the Hadess too ? > > And if possible double check nothing else has changed? > > I put urgent in the subject, because I would like to get the Hadess support in to kernel-2.6.30, and the merge window for that has just opened (and doesn't stay open all that long). > > Thanks& Regards, > > Hans > > > p.s. > > 2.6.30 will come with DMI based detection (so auto loading) of the Hermes and Syleus drivers, and with Syleus support, leading to 100% plug and play hwmon support for FSC systems with those hwmon IC's :)
