Hy all, I try to use LM-sensors at my Fedora Core 9 64bit installed on a Asus P6T motherboard, But i think lm-sensors dont see the integrated sensors: - Motherboard: Asus p6t Deluxe - Sensors-detect revision 5108 (2008-01-22 13:22:47 +0100) - Linux 2.6.25-14.fc9.x86_64 > [root at iceland ~]# sensors-detect > # sensors-detect revision 5108 (2008-01-22 13:22:47 +0100) > We can start with probing for (PCI) I2C or SMBus adapters. > Do you want to probe now? (YES/no): > Probing for PCI bus adapters... > Found unknown SMBus adapter 8086:3a30 at 0000:00:1f.3. > Sorry, no known PCI bus adapters found. > We will now try to load each adapter module in turn. > If you have undetectable or unsupported adapters, you can have them > scanned by manually loading the modules before running this script. > We are now going to do the I2C/SMBus adapter probings. Some chips may > be double detected; we choose the one with the highest confidence > value in that case. > If you found that the adapter hung after probing a certain address, > you can specify that address to remain unprobed. > Next adapter: SMBus I801 adapter at 0400 (i2c-0) > Do you want to scan it? (YES/no/selectively): > Client found at address 0x44 > Probing for `Maxim MAX6633/MAX6634/MAX6635'... > No > Client found at address 0x4f > Probing for `National Semiconductor LM75'... > No > Probing for `Dallas Semiconductor DS75'... No > Probing for `Dallas Semiconductor DS1621'... No > Probing for `Maxim MAX6633/MAX6634/MAX6635'... > No > Client found at address 0x50 > Probing for `Analog Devices ADM1033'... No > Probing for `Analog Devices ADM1034'... No > Probing for `SPD EEPROM'... No > Probing for `EDID EEPROM'... No > Client found at address 0x51 > Probing for `Analog Devices ADM1033'... No > Probing for `Analog Devices ADM1034'... No > Probing for `SPD EEPROM'... No > Probing for `EDID EEPROM'... No > Client found at address 0x52 > Probing for `Analog Devices ADM1033'... No > Probing for `Analog Devices ADM1034'... No > Probing for `SPD EEPROM'... No > Probing for `EDID EEPROM'... No > Client found at address 0x53 > Probing for `Analog Devices ADM1033'... No > Probing for `Analog Devices ADM1034'... No > Probing for `SPD EEPROM'... No > Probing for `EDID EEPROM'... No > Some chips are also accessible through the ISA I/O ports. We have to > write to arbitrary I/O ports to probe them. This is usually safe though. > Yes, you do have ISA I/O ports even if you do not have any ISA slots! > Do you want to scan the ISA I/O ports? (YES/no): Probing for `National > Semiconductor LM78' at 0x290... No > Probing for `National Semiconductor LM78-J' at 0x290... No > Probing for `National Semiconductor LM79' at 0x290... No > Probing for `Winbond W83781D' at 0x290... No > Probing for `Winbond W83782D' at 0x290... No > Probing for `Silicon Integrated Systems SIS5595'... No > Probing for `VIA VT82C686 Integrated Sensors'... No > Probing for `VIA VT8231 Integrated Sensors'... No > Probing for `IPMI BMC KCS' at 0xca0... No > Probing for `IPMI BMC SMIC' at 0xca8... No > Some Super I/O chips may also contain sensors. We have to write to > standard I/O ports to probe them. This is usually safe. > Do you want to scan for Super I/O sensors? (YES/no): Probing for Super-I/O > at 0x2e/0x2f > Trying family `National Semiconductor'... No > Trying family `SMSC'... No > Trying family `VIA/Winbond/Fintek'... Yes > Found unknown chip with ID 0xa513 > (logical device B has address 0x290, could be sensors) > Probing for Super-I/O at 0x4e/0x4f > Trying family `National Semiconductor'... No > Trying family `SMSC'... No > Trying family `VIA/Winbond/Fintek'... No > Trying family `ITE'... No > Some CPUs or memory controllers may also contain embedded sensors. > Do you want to scan for them? (YES/no): AMD K8 thermal > sensors... No > AMD K10 thermal sensors... No > Intel Core family thermal sensor... No > Intel AMB FB-DIMM thermal sensor... No > *Sorry, no sensors were detected.* > Either your sensors are not supported, or they are connected to an > I2C or SMBus adapter that is not supported. See doc/FAQ, > doc/lm_sensors-FAQ.html or http://www.lm-sensors.org/wiki/FAQ > (FAQ #4.24.3) for further information. > If you find out what chips are on your board, check > http://www.lm-sensors.org/wiki/Devices for driver status. > [root at iceland ~]# lsmod Module Size Used by i2c_dev 14608 0 bridge 59304 0 bnep 21632 2 rfcomm 44448 4 l2cap 29312 16 bnep,rfcomm bluetooth 59044 5 bnep,rfcomm,l2cap nfs 257240 1 lockd 71376 2 nfs nfs_acl 11392 1 nfs fuse 51008 1 sunrpc 185000 11 nfs,lockd,nfs_acl dm_mirror 32004 0 dm_multipath 24976 0 dm_mod 62104 2 dm_mirror,dm_multipath ipv6 276360 48 sr_mod 23732 0 cdrom 40616 1 sr_mod ahci 35976 0 i2c_i801 17692 0 snd_hda_intel 447540 1 firewire_ohci 29316 0 firewire_core 44224 1 firewire_ohci snd_seq_dummy 11524 0 snd_seq_oss 39232 0 snd_seq_midi_event 15104 1 snd_seq_oss snd_seq 61840 5 snd_seq_dummy,snd_seq_oss,snd_seq_midi_event snd_seq_device 15508 3 snd_seq_dummy,snd_seq_oss,snd_seq snd_pcm_oss 52096 0 snd_mixer_oss 23296 1 snd_pcm_oss snd_pcm 86024 2 snd_hda_intel,snd_pcm_oss wmi 15040 0 button 15776 0 pata_marvell 13696 0 snd_timer 29584 2 snd_seq,snd_pcm snd_page_alloc 16912 2 snd_hda_intel,snd_pcm snd_hwdep 16520 1 snd_hda_intel i2c_core 28448 2 i2c_dev,i2c_i801 pcspkr 11136 0 sky2 52740 0 snd 66808 12 snd_hda_intel,snd_seq_dummy,snd_seq_oss,snd_seq,snd_seq_device,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_timer,snd_hwdep soundcore 14864 1 snd crc_itu_t 10368 1 firewire_core sg 40528 0 ata_generic 14596 0 pata_acpi 13824 0 ata_piix 29188 4 libata 149024 5 ahci,pata_marvell,ata_generic,pata_acpi,ata_piix sd_mod 33200 5 scsi_mod 150232 4 sr_mod,sg,libata,sd_mod ext3 129680 3 jbd 52904 1 ext3 mbcache 15876 1 ext3 uhci_hcd 29984 0 ohci_hcd 28804 0 ehci_hcd 40460 0 [root at iceland ~]# lspci -nn 00:00.0 Host bridge [0600]: Intel Corporation QuickPath Architecture I/O Hub to ESI Port [8086:3405] (rev 12) 00:01.0 PCI bridge [0604]: Intel Corporation QuickPath Architecture I/O Hub PCI Express Root Port 1 [8086:3408] (rev 12) 00:03.0 PCI bridge [0604]: Intel Corporation QuickPath Architecture I/O Hub PCI Express Root Port 3 [8086:340a] (rev 12) 00:07.0 PCI bridge [0604]: Intel Corporation QuickPath Architecture I/O Hub PCI Express Root Port 7 [8086:340e] (rev 12) 00:10.0 PIC [0800]: Intel Corporation QuickPath Interconnect Physical and Link Layer Registers Port 0 [8086:3425] (rev 12) 00:10.1 PIC [0800]: Intel Corporation QuickPath Interconnect Routing and Protocol Layer Registers Port 0 [8086:3426] (rev 12) 00:13.0 PIC [0800]: Intel Corporation QuickPath Architecture I/O Hub I/OxAPIC Interrupt Controller [8086:342d] (rev 12) 00:14.0 PIC [0800]: Intel Corporation QuickPath Architecture I/O Hub System Management Registers [8086:342e] (rev 12) 00:14.1 PIC [0800]: Intel Corporation QuickPath Architecture I/O Hub GPIO and Scratch Pad Registers [8086:3422] (rev 12) 00:14.2 PIC [0800]: Intel Corporation QuickPath Architecture I/O Hub Control Status and RAS Registers [8086:3423] (rev 12) 00:14.3 PIC [0800]: Intel Corporation QuickPath Architecture I/O Hub Throttle Registers [8086:3438] (rev 12) 00:1a.0 USB Controller [0c03]: Intel Corporation ICH10 USB UHCI Controller #4 [8086:3a37] 00:1a.1 USB Controller [0c03]: Intel Corporation ICH10 USB UHCI Controller #5 [8086:3a38] 00:1a.2 USB Controller [0c03]: Intel Corporation ICH10 USB UHCI Controller #6 [8086:3a39] 00:1a.7 USB Controller [0c03]: Intel Corporation ICH10 USB2 EHCI Controller #2 [8086:3a3c] 00:1b.0 Audio device [0403]: Intel Corporation ICH10 HD Audio Controller [8086:3a3e] 00:1c.0 PCI bridge [0604]: Intel Corporation ICH10 PCI Express Port 1 [8086:3a40] 00:1c.2 PCI bridge [0604]: Intel Corporation ICH10 PCI Express Port 3 [8086:3a44] 00:1c.4 PCI bridge [0604]: Intel Corporation ICH10 PCI Express Port 5 [8086:3a48] 00:1c.5 PCI bridge [0604]: Intel Corporation ICH10 PCI Express Port 6 [8086:3a4a] 00:1d.0 USB Controller [0c03]: Intel Corporation ICH10 USB UHCI Controller #1 [8086:3a34] 00:1d.1 USB Controller [0c03]: Intel Corporation ICH10 USB UHCI Controller #2 [8086:3a35] 00:1d.2 USB Controller [0c03]: Intel Corporation ICH10 USB UHCI Controller #3 [8086:3a36] 00:1d.7 USB Controller [0c03]: Intel Corporation ICH10 USB2 EHCI Controller #1 [8086:3a3a] 00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] (rev 90) 00:1f.0 ISA bridge [0601]: Intel Corporation ICH10 LPC Interface Controller [8086:3a16] 00:1f.2 IDE interface [0101]: Intel Corporation ICH10 4 port SATA IDE Controller [8086:3a20] 00:1f.3 SMBus [0c05]: Intel Corporation ICH10 SMBus Controller [8086:3a30] 00:1f.5 IDE interface [0101]: Intel Corporation ICH10 2 port SATA IDE Controller [8086:3a26] 02:00.0 VGA compatible controller [0300]: nVidia Corporation GeForce 8400 GS [10de:0422] (rev a1) 04:00.0 Ethernet controller [0200]: Marvell Technology Group Ltd. 88E8056 PCI-E Gigabit Ethernet Controller [11ab:4364] (rev 12) 05:00.0 IDE interface [0101]: Marvell Technology Group Ltd. 88SE6121 SATA II Controller [11ab:6121] (rev b2) 06:00.0 Ethernet controller [0200]: Marvell Technology Group Ltd. 88E8056 PCI-E Gigabit Ethernet Controller [11ab:4364] (rev 12) 08:02.0 FireWire (IEEE 1394) [0c00]: VIA Technologies, Inc. IEEE 1394 Host Controller [1106:3044] (rev c0) -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.lm-sensors.org/pipermail/lm-sensors/attachments/20090326/5b647069/attachment-0001.html
