Hi Guys,
I used the latest sensors-detect script, and found some unknown chips/clients.
Found unknown chip with ID 0x0b00
Client found at address 0x19
I was wondering what they are - one of them is probably my fan.
You can see them in the sensors-detect output below.
Thanks,
Shane
--
Shane Helms <shanehelms at gmail.com>
Here are the details:
[root at tinybox ~]# uname -a
Linux tinybox 2.6.28-ARCH #1 SMP PREEMPT Sun Feb 22 11:03:50 UTC 2009 i686 Intel(R) Core(TM) Solo CPU U1400 @ 1.20GHz GenuineIntel GNU/Linux
[root at tinybox ~]# pacman -Qs lm_sensors
local/lm_sensors 3.1.0-1
[root at tinybox ~]# sensors
coretemp-isa-0000
Adapter: ISA adapter
Core 0: +60.0?C (crit = +100.0?C)
acpitz-virtual-0
Adapter: Virtual device
temp1: +26.8?C (crit = +100.0?C)
temp2: +26.8?C (crit = +100.0?C)
[root at tinybox ~]# lsmod
Module Size Used by
i915 58372 2
drm 83880 3 i915
ipv6 260340 14
cpufreq_conservative 7944 1
sbs 12936 0
sbshc 6656 1 sbs
nls_cp437 7424 1
vfat 12800 1
fat 50720 1 vfat
btusb 13464 0
bluetooth 54372 1 btusb
joydev 11712 0
pcmcia 35532 0
uhci_hcd 24592 0
sdhci_pci 9088 0
sdhci 17028 1 sdhci_pci
ehci_hcd 36876 0
ohci1394 31280 0
yenta_socket 25996 1
rsrc_nonstatic 13056 1 yenta_socket
mmc_core 46876 1 sdhci
iTCO_wdt 12836 0
iTCO_vendor_support 4996 1 iTCO_wdt
ieee1394 79940 1 ohci1394
pcmcia_core 34452 3 pcmcia,yenta_socket,rsrc_nonstatic
sg 26804 0
intel_agp 27836 1
usbcore 136848 4 btusb,uhci_hcd,ehci_hcd
agpgart 31572 3 drm,intel_agp
psmouse 55828 0
serio_raw 7172 0
snd_pcsp 11048 0
video 18704 0
output 4608 1 video
fujitsu_laptop 13960 0
thermal 17180 0
fan 6276 0
button 7824 0
battery 12036 0
ac 6020 0
acpi_cpufreq 9868 0
freq_table 5632 1 acpi_cpufreq
processor 41388 3 thermal,acpi_cpufreq
evdev 11296 13
snd_hda_intel 412980 1
snd_seq_oss 31872 0
snd_seq_midi_event 8192 1 snd_seq_oss
snd_seq 49968 4 snd_seq_oss,snd_seq_midi_event
snd_seq_device 8204 2 snd_seq_oss,snd_seq
snd_hwdep 9092 1 snd_hda_intel
snd_pcm_oss 40192 0
snd_pcm 70020 3 snd_pcsp,snd_hda_intel,snd_pcm_oss
snd_timer 21384 2 snd_seq,snd_pcm
snd_page_alloc 10120 2 snd_hda_intel,snd_pcm
snd_mixer_oss 16512 2 snd_pcm_oss
snd 50852 10 snd_pcsp,snd_hda_intel,snd_seq_oss,snd_seq,snd_seq_device,snd_hwdep,snd_pcm_oss,snd_pcm,snd_timer,snd_mixer_oss
soundcore 8160 2 snd
arc4 3712 2
ecb 4608 2
iwl3945 91128 0
rfkill 11596 2 iwl3945
mac80211 161184 1 iwl3945
led_class 5508 1 iwl3945
cfg80211 31760 2 iwl3945,mac80211
sky2 48132 0
coretemp 7808 0
i2c_i801 10896 0
i2c_core 22804 1 i2c_i801
rtc_cmos 12332 0
rtc_core 17564 1 rtc_cmos
rtc_lib 4480 1 rtc_core
reiserfs 231424 3
sd_mod 26904 6
pata_acpi 6016 0
ata_generic 6788 0
ata_piix 23300 5
libata 157856 3 pata_acpi,ata_generic,ata_piix
scsi_mod 102164 3 sg,sd_mod,libata
[root at tinybox ~]# sensors-detect
# sensors-detect revision $Revision$
# System: FUJITSU 0000000000 (laptop)
# Board: FUJITSU FJNB1B4
This program will help you determine which kernel modules you need
to load to use lm_sensors most effectively. It is generally safe
and recommended to accept the default answers to all questions,
unless you know what you're doing.
Some south bridges, CPUs or memory controllers contain embedded sensors.
Do you want to scan for them? This is totally safe. (YES/no):
Silicon Integrated Systems SIS5595... No
VIA VT82C686 Integrated Sensors... No
VIA VT8231 Integrated Sensors... No
AMD K8 thermal sensors... No
AMD K10 thermal sensors... No
Intel Core family thermal sensor... Success!
(driver `coretemp')
Intel AMB FB-DIMM thermal sensor... No
VIA C7 thermal and voltage sensors... No
Some Super I/O chips contain embedded sensors. We have to write to
standard I/O ports to probe them. This is usually safe.
Do you want to scan for Super I/O sensors? (YES/no):
Probing for Super-I/O at 0x2e/0x2f
Trying family `National Semiconductor'... No
Trying family `SMSC'... No
Trying family `VIA/Winbond/Fintek'... No
Trying family `ITE'... No
Probing for Super-I/O at 0x4e/0x4f
Trying family `National Semiconductor'... No
Trying family `SMSC'... Yes
Found unknown chip with ID 0x0b00
Some hardware monitoring chips are accessible through the ISA I/O ports.
We have to write to arbitrary I/O ports to probe them. This is usually
safe though. Yes, you do have ISA I/O ports even if you do not have any
ISA slots! Do you want to scan the ISA I/O ports? (YES/no):
Probing for `National Semiconductor LM78' at 0x290... No
Probing for `National Semiconductor LM79' at 0x290... No
Probing for `Winbond W83781D' at 0x290... No
Probing for `Winbond W83782D' at 0x290... No
Lastly, we can probe the I2C/SMBus adapters for connected hardware
monitoring devices. This is the most risky part, and while it works
reasonably well on most systems, it has been reported to cause trouble
on some systems.
Do you want to probe the I2C/SMBus adapters now? (YES/no):
Using driver `i2c-i801' for device 0000:00:1f.3: Intel 82801G ICH7
Module i2c-dev loaded successfully.
Next adapter: SMBus I801 adapter at 18a0 (i2c-0)
Do you want to scan it? (YES/no/selectively):
Client found at address 0x0b
Probing for `Smart Battery'... Success!
(confidence 5, driver `sbs')
Client found at address 0x19
Probing for `Analog Devices ADM1021'... No
Probing for `Analog Devices ADM1021A/ADM1023'... No
Probing for `Maxim MAX1617'... No
Probing for `Maxim MAX1617A'... No
Probing for `Maxim MAX1668'... No
Probing for `Maxim MAX1805'... No
Probing for `Maxim MAX1989'... No
Probing for `Maxim MAX6655/MAX6656'... No
Probing for `TI THMC10'... No
Probing for `National Semiconductor LM84'... No
Probing for `Genesys Logic GL523SM'... No
Probing for `Onsemi MC1066'... No
Probing for `Maxim MAX1618'... No
Probing for `Maxim MAX1619'... No
Probing for `National Semiconductor LM82/LM83'... No
Probing for `Maxim MAX6654/MAX6690'... No
Probing for `Maxim MAX6680/MAX6681'... No
Probing for `National Semiconductor LM95231'... No
Now follows a summary of the probes I have just done.
Just press ENTER to continue:
Driver `coretemp':
* Chip `Intel Core family thermal sensor' (confidence: 9)
Driver `sbs':
* Bus `SMBus I801 adapter at 18a0'
Busdriver `i2c_i801', I2C address 0x0b
Chip `Smart Battery' (confidence: 5)
Do you want to generate /etc/sysconfig/lm_sensors? (yes/NO):
To load everything that is needed, add this to one of the system
initialization scripts (e.g. /etc/rc.d/rc.local):
#----cut here----
# Chip drivers
modprobe coretemp
modprobe sbs
/usr/bin/sensors -s
#----cut here----
If you have some drivers built into your kernel, the list above will
contain too many modules. Skip the appropriate ones! You really
should try these commands right now to make sure everything is
working properly. Monitoring programs won't work until the needed
modules are loaded.
Unloading i2c-dev... OK
[root at tinybox ~]# lspci -nn
00:00.0 Host bridge [0600]: Intel Corporation Mobile 945GM/PM/GMS, 943/940GML and 945GT Express Memory Controller Hub [8086:27a0] (rev 03)
00:02.0 VGA compatible controller [0300]: Intel Corporation Mobile 945GM/GMS, 943/940GML Express Integrated Graphics Controller [8086:27a2] (rev 03)
00:02.1 Display controller [0380]: Intel Corporation Mobile 945GM/GMS/GME, 943/940GML Express Integrated Graphics Controller [8086:27a6] (rev 03)
00:1b.0 Audio device [0403]: Intel Corporation 82801G (ICH7 Family) High Definition Audio Controller [8086:27d8] (rev 02)
00:1c.0 PCI bridge [0604]: Intel Corporation 82801G (ICH7 Family) PCI Express Port 1 [8086:27d0] (rev 02)
00:1c.1 PCI bridge [0604]: Intel Corporation 82801G (ICH7 Family) PCI Express Port 2 [8086:27d2] (rev 02)
00:1c.3 PCI bridge [0604]: Intel Corporation 82801G (ICH7 Family) PCI Express Port 4 [8086:27d6] (rev 02)
00:1d.0 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #1 [8086:27c8] (rev 02)
00:1d.1 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #2 [8086:27c9] (rev 02)
00:1d.2 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #3 [8086:27ca] (rev 02)
00:1d.3 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #4 [8086:27cb] (rev 02)
00:1d.7 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB2 EHCI Controller [8086:27cc] (rev 02)
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge [8086:2448] (rev e2)
00:1f.0 ISA bridge [0601]: Intel Corporation 82801GBM (ICH7-M) LPC Interface Bridge [8086:27b9] (rev 02)
00:1f.1 IDE interface [0101]: Intel Corporation 82801G (ICH7 Family) IDE Controller [8086:27df] (rev 02)
00:1f.3 SMBus [0c05]: Intel Corporation 82801G (ICH7 Family) SMBus Controller [8086:27da] (rev 02)
02:00.0 Ethernet controller [0200]: Marvell Technology Group Ltd. 88E8055 PCI-E Gigabit Ethernet Controller [11ab:4363] (rev 12)
05:00.0 Network controller [0280]: Intel Corporation PRO/Wireless 3945ABG [Golan] Network Connection [8086:4222] (rev 02)
08:03.0 CardBus bridge [0607]: Ricoh Co Ltd RL5c476 II [1180:0476] (rev b3)
08:03.1 FireWire (IEEE 1394) [0c00]: Ricoh Co Ltd R5C552 IEEE 1394 Controller [1180:0552] (rev 08)
08:03.2 SD Host controller [0805]: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter [1180:0822] (rev 17)
[root at tinybox ~]# dmesg
BIOS EBDA/lowmem at: 0009f800/0009f800
Linux version 2.6.28-ARCH (root at T-POWA-LX) (gcc version 4.3.3 (GCC) ) #1 SMP PREEMPT Sun Feb 22 11:03:50 UTC 2009
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
NSC Geode by NSC
Cyrix CyrixInstead
Centaur CentaurHauls
Transmeta GenuineTMx86
Transmeta TransmetaCPU
UMC UMC UMC UMC
PAT WC disabled due to known CPU erratum.
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000003f640000 (usable)
BIOS-e820: 000000003f640000 - 000000003f655000 (ACPI data)
BIOS-e820: 000000003f655000 - 000000003f700000 (ACPI NVS)
BIOS-e820: 000000003f700000 - 0000000040000000 (reserved)
BIOS-e820: 00000000f8000000 - 00000000fc000000 (reserved)
BIOS-e820: 00000000fec00000 - 00000000fed90000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
DMI 2.4 present.
Phoenix BIOS detected: BIOS may corrupt low RAM, working it around.
last_pfn = 0x3f640 max_arch_pfn = 0x100000
Scanning 0 areas for low memory corruption
modified physical RAM map:
modified: 0000000000000000 - 0000000000010000 (reserved)
modified: 0000000000010000 - 000000000009f800 (usable)
modified: 000000000009f800 - 00000000000a0000 (reserved)
modified: 00000000000dc000 - 0000000000100000 (reserved)
modified: 0000000000100000 - 000000003f640000 (usable)
modified: 000000003f640000 - 000000003f655000 (ACPI data)
modified: 000000003f655000 - 000000003f700000 (ACPI NVS)
modified: 000000003f700000 - 0000000040000000 (reserved)
modified: 00000000f8000000 - 00000000fc000000 (reserved)
modified: 00000000fec00000 - 00000000fed90000 (reserved)
modified: 00000000fee00000 - 00000000fee01000 (reserved)
modified: 00000000ff000000 - 0000000100000000 (reserved)
kernel direct mapping tables up to 377fe000 @ 10000-16000
RAMDISK: 3f5ad000 - 3f62f6f2
Allocated new RAMDISK: 00012000 - 000946f2
Move RAMDISK from 000000003f5ad000 - 000000003f62f6f1 to 00012000 - 000946f1
ACPI: RSDP 000F58B0, 0014 (r0 FUJ )
ACPI: RSDT 3F64DB00, 0048 (r1 FUJ PC 1170000 FUJ 100)
ACPI: FACP 3F654F8C, 0074 (r1 FUJ PC 1170000 FUJ 100)
ACPI: DSDT 3F64DB50, 661C (r1 FUJ FJNB1B4 1170000 MSFT 100000E)
ACPI: FACS 3F655FC0, 0040
ACPI: MCFG 3F65416C, 003C (r1 FUJ FJNB1B4 1170000 FUJ 100)
ACPI: SSDT 3F6541A8, 04DC (r1 FUJ FJNB1B4 1170000 INTL 20050624)
ACPI: SSDT 3F654684, 0166 (r1 FUJ FJNB1B4 1170000 INTL 20050624)
ACPI: SSDT 3F654B07, 01D0 (r1 FUJ FJNB1B4 1170000 INTL 20050624)
ACPI: APIC 3F654D5C, 005A (r1 FUJ FJNB1B4 1170000 LTP 0)
ACPI: HPET 3F654DB6, 0038 (r1 FUJ FJNB1B4 1170000 FUJ 100)
ACPI: BOOT 3F654DEE, 0028 (r1 FUJ FJNB1B4 1170000 FUJ 100)
ACPI: SLIC 3F654E16, 0176 (r1 FUJ PC 1170000 FUJ 100)
ACPI: Local APIC address 0xfee00000
126MB HIGHMEM available.
887MB LOWMEM available.
mapped low ram: 0 - 377fe000
low ram: 00000000 - 377fe000
bootmap 00095000 - 0009bf00
(9 early reservations) ==> bootmem [0000000000 - 00377fe000]
#0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
#1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000]
#2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000]
#3 [0000100000 - 000055b520] TEXT DATA BSS ==> [0000100000 - 000055b520]
#4 [000055c000 - 000055f000] INIT_PG_TABLE ==> [000055c000 - 000055f000]
#5 [000009f800 - 0000100000] BIOS reserved ==> [000009f800 - 0000100000]
#6 [0000010000 - 0000012000] PGTABLE ==> [0000010000 - 0000012000]
#7 [0000012000 - 00000946f2] NEW RAMDISK ==> [0000012000 - 00000946f2]
#8 [0000095000 - 000009c000] BOOTMAP ==> [0000095000 - 000009c000]
Zone PFN ranges:
DMA 0x00000010 -> 0x00001000
Normal 0x00001000 -> 0x000377fe
HighMem 0x000377fe -> 0x0003f640
Movable zone start PFN for each node
early_node_map[2] active PFN ranges
0: 0x00000010 -> 0x0000009f
0: 0x00000100 -> 0x0003f640
On node 0 totalpages: 259535
free_area_init_node: node 0, pgdat c0406600, node_mem_map c1000200
DMA zone: 32 pages used for memmap
DMA zone: 0 pages reserved
DMA zone: 3951 pages, LIFO batch:0
Normal zone: 1744 pages used for memmap
Normal zone: 221486 pages, LIFO batch:31
HighMem zone: 253 pages used for memmap
HighMem zone: 32069 pages, LIFO batch:7
Movable zone: 0 pages used for memmap
ACPI: PM-Timer IO Port: 0x1008
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Enabling APIC mode: Flat. Using 1 I/O APICs
ACPI: HPET id: 0x8086a201 base: 0xfed00000
Using ACPI (MADT) for SMP configuration information
SMP: Allowing 1 CPUs, 0 hotplug CPUs
PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000dc000
PM: Registered nosave memory: 00000000000dc000 - 0000000000100000
Allocating PCI resources starting at 50000000 (gap: 40000000:b8000000)
PERCPU: Allocating 36864 bytes of per cpu data
NR_CPUS: 16, nr_cpu_ids: 1, nr_node_ids 1
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 257506
Kernel command line: root=/dev/disk/by-uuid/5097edde-a577-4138-8869-e7ceb917fc26 ro vga=791
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 16384 bytes)
Fast TSC calibration using PIT
Detected 1196.925 MHz processor.
Console: colour dummy device 80x25
console [tty0] enabled
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Scanning for low memory corruption every 60 seconds
Memory: 1023752k/1038592k available (2228k kernel code, 14004k reserved, 1026k data, 332k init, 129288k highmem)
virtual kernel memory layout:
fixmap : 0xffee8000 - 0xfffff000 (1116 kB)
pkmap : 0xff800000 - 0xffc00000 (4096 kB)
vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB)
lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB)
.init : 0xc0433000 - 0xc0486000 ( 332 kB)
.data : 0xc032d1b9 - 0xc042db5c (1026 kB)
.text : 0xc0100000 - 0xc032d1b9 (2228 kB)
Checking if this processor honours the WP bit even in supervisor mode...Ok.
SLUB: Genslabs=12, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
hpet clockevent registered
HPET: 3 timers in total, 0 timers will be used for per-cpu timer
Calibrating delay loop (skipped), value calculated using timer frequency.. 2394.59 BogoMIPS (lpj=3989750)
Security Framework initialized
Mount-cache hash table entries: 512
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 2048K
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
using mwait in idle threads.
Checking 'hlt' instruction... OK.
SMP alternatives: switching to UP code
Freeing SMP alternatives: 9k freed
ACPI: Core revision 20080926
ACPI: Checking initramfs for custom DSDT
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: Intel(R) Core(TM) Solo CPU U1400 @ 1.20GHz stepping 0c
Brought up 1 CPUs
Total of 1 processors activated (2394.59 BogoMIPS).
net_namespace: 768 bytes
Booting paravirtualized kernel on bare hardware
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: MCFG configuration 0: base f8000000 segment 0 buses 0 - 63
PCI: MCFG area at f8000000 reserved in E820
PCI: Using MMCONFIG for extended config space
PCI: Using configuration type 1 for base access
ACPI: EC: Look up EC in DSDT
ACPI: SSDT 3F6555C3, 0893 (r1 FUJ FJNB1B4 1170000 INTL 20050624)
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
ACPI: EC: driver started in poll mode
ACPI: No dock devices found.
ACPI: PCI Root Bridge [PCI0] (0000:00)
pci 0000:00:02.0: reg 10 32bit mmio: [0xf0300000-0xf037ffff]
pci 0000:00:02.0: reg 14 io port: [0x1800-0x1807]
pci 0000:00:02.0: reg 18 32bit mmio: [0xe0000000-0xefffffff]
pci 0000:00:02.0: reg 1c 32bit mmio: [0xf0400000-0xf043ffff]
pci 0000:00:02.1: reg 10 32bit mmio: [0xf0380000-0xf03fffff]
pci 0000:00:1b.0: reg 10 64bit mmio: [0xf0640000-0xf0643fff]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: PME# disabled
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: PME# disabled
pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.1: PME# disabled
pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.3: PME# disabled
pci 0000:00:1d.0: reg 20 io port: [0x1820-0x183f]
pci 0000:00:1d.1: reg 20 io port: [0x1840-0x185f]
pci 0000:00:1d.2: reg 20 io port: [0x1860-0x187f]
pci 0000:00:1d.3: reg 20 io port: [0x1880-0x189f]
pci 0000:00:1d.7: reg 10 32bit mmio: [0xf0644000-0xf06443ff]
pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.7: PME# disabled
pci 0000:00:1f.0: quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO
pci 0000:00:1f.0: quirk: region 1180-11bf claimed by ICH6 GPIO
pci 0000:00:1f.1: reg 10 io port: [0x00-0x07]
pci 0000:00:1f.1: reg 14 io port: [0x00-0x03]
pci 0000:00:1f.1: reg 18 io port: [0x00-0x07]
pci 0000:00:1f.1: reg 1c io port: [0x00-0x03]
pci 0000:00:1f.1: reg 20 io port: [0x1810-0x181f]
pci 0000:00:1f.3: reg 20 io port: [0x18a0-0x18bf]
pci 0000:02:00.0: reg 10 64bit mmio: [0xf0000000-0xf0003fff]
pci 0000:02:00.0: reg 18 io port: [0x2000-0x20ff]
pci 0000:02:00.0: reg 30 32bit mmio: [0x000000-0x01ffff]
pci 0000:02:00.0: supports D1 D2
pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:02:00.0: PME# disabled
pci 0000:00:1c.0: bridge io port: [0x2000-0x2fff]
pci 0000:00:1c.0: bridge 32bit mmio: [0xf0000000-0xf00fffff]
pci 0000:00:1c.1: bridge io port: [0x00-0xfff]
pci 0000:00:1c.1: bridge 32bit mmio: [0x000000-0x0fffff]
pci 0000:00:1c.1: bridge 64bit mmio pref: [0x000000-0x0fffff]
pci 0000:05:00.0: reg 10 32bit mmio: [0xf0100000-0xf0100fff]
pci 0000:05:00.0: PME# supported from D0 D3hot D3cold
pci 0000:05:00.0: PME# disabled
pci 0000:00:1c.3: bridge 32bit mmio: [0xf0100000-0xf01fffff]
pci 0000:08:03.0: reg 10 32bit mmio: [0x000000-0x000fff]
pci 0000:08:03.0: supports D1 D2
pci 0000:08:03.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:08:03.0: PME# disabled
pci 0000:08:03.1: reg 10 32bit mmio: [0xf0200000-0xf02007ff]
pci 0000:08:03.1: supports D1 D2
pci 0000:08:03.1: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:08:03.1: PME# disabled
pci 0000:08:03.2: reg 10 32bit mmio: [0xf0200800-0xf02008ff]
pci 0000:08:03.2: supports D1 D2
pci 0000:08:03.2: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:08:03.2: PME# disabled
pci 0000:00:1e.0: transparent bridge
pci 0000:00:1e.0: bridge 32bit mmio: [0xf0200000-0xf02fffff]
bus 00 -> node 0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *11 12 14 15)
PCI: Using ACPI for IRQ routing
pci 0000:00:1c.1: BAR 7: can't allocate resource
pci 0000:00:1c.1: BAR 8: can't allocate resource
pci 0000:00:1c.1: BAR 9: can't allocate resource
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 10 devices
ACPI: ACPI bus type pnp unregistered
system 00:00: iomem range 0xf8000000-0xfbffffff has been reserved
system 00:02: ioport range 0x4d0-0x4d1 has been reserved
system 00:02: ioport range 0x800-0x80f has been reserved
system 00:02: ioport range 0x1000-0x107f has been reserved
system 00:02: ioport range 0x1080-0x10ff has been reserved
system 00:02: ioport range 0x1100-0x111f has been reserved
system 00:02: ioport range 0x1180-0x11bf has been reserved
system 00:02: ioport range 0xf800-0xf87f has been reserved
system 00:02: ioport range 0xf880-0xf8ff has been reserved
system 00:02: ioport range 0xfc00-0xfc7f has been reserved
system 00:02: ioport range 0xfc80-0xfcff has been reserved
system 00:02: ioport range 0xfd0c-0xfd7f has been reserved
system 00:02: ioport range 0xfe00-0xfe01 has been reserved
system 00:02: iomem range 0xf8000000-0xfbffffff has been reserved
system 00:02: iomem range 0xfed14000-0xfed17fff has been reserved
system 00:02: iomem range 0xfed18000-0xfed18fff has been reserved
system 00:02: iomem range 0xfed19000-0xfed19fff has been reserved
system 00:02: iomem range 0xfed1c000-0xfed1ffff has been reserved
system 00:02: iomem range 0xfed20000-0xfed3ffff has been reserved
system 00:02: iomem range 0xfed45000-0xfed8ffff has been reserved
system 00:02: iomem range 0xfec00000-0xfec00fff has been reserved
system 00:02: iomem range 0xfee00000-0xfee00fff has been reserved
system 00:02: iomem range 0xfef00000-0xfeffffff has been reserved
system 00:02: iomem range 0xcec00-0xcefff has been reserved
system 00:02: iomem range 0xffb00000-0xffbfffff has been reserved
system 00:02: iomem range 0xfed40000-0xfed44fff has been reserved
system 00:09: iomem range 0xfed00000-0xfed003ff has been reserved
pci 0000:00:1c.0: PCI bridge, secondary bus 0000:02
pci 0000:00:1c.0: IO window: 0x2000-0x2fff
pci 0000:00:1c.0: MEM window: 0xf0000000-0xf00fffff
pci 0000:00:1c.0: PREFETCH window: 0x00000054000000-0x000000540fffff
pci 0000:00:1c.1: PCI bridge, secondary bus 0000:03
pci 0000:00:1c.1: IO window: disabled
pci 0000:00:1c.1: MEM window: disabled
pci 0000:00:1c.1: PREFETCH window: disabled
pci 0000:00:1c.3: PCI bridge, secondary bus 0000:05
pci 0000:00:1c.3: IO window: disabled
pci 0000:00:1c.3: MEM window: 0xf0100000-0xf01fffff
pci 0000:00:1c.3: PREFETCH window: disabled
pci 0000:08:03.0: CardBus bridge, secondary bus 0000:09
pci 0000:08:03.0: IO window: 0x003000-0x0030ff
pci 0000:08:03.0: IO window: 0x003400-0x0034ff
pci 0000:08:03.0: PREFETCH window: 0x50000000-0x53ffffff
pci 0000:08:03.0: MEM window: 0x58000000-0x5bffffff
pci 0000:00:1e.0: PCI bridge, secondary bus 0000:08
pci 0000:00:1e.0: IO window: 0x3000-0x3fff
pci 0000:00:1e.0: MEM window: 0xf0200000-0xf02fffff
pci 0000:00:1e.0: PREFETCH window: 0x00000050000000-0x00000053ffffff
pci 0000:00:1c.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
pci 0000:00:1c.0: setting latency timer to 64
pci 0000:00:1c.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
pci 0000:00:1c.1: setting latency timer to 64
pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
pci 0000:00:1c.3: setting latency timer to 64
pci 0000:00:1e.0: setting latency timer to 64
pci 0000:08:03.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
bus: 00 index 0 io port: [0x00-0xffff]
bus: 00 index 1 mmio: [0x000000-0xffffffff]
bus: 02 index 0 io port: [0x2000-0x2fff]
bus: 02 index 1 mmio: [0xf0000000-0xf00fffff]
bus: 02 index 2 mmio: [0x54000000-0x540fffff]
bus: 02 index 3 mmio: [0x0-0x0]
bus: 03 index 0 mmio: [0x0-0xfff]
bus: 03 index 1 mmio: [0x0-0xfffff]
bus: 03 index 2 mmio: [0x0-0xfffff]
bus: 03 index 3 mmio: [0x0-0x0]
bus: 05 index 0 mmio: [0x0-0x0]
bus: 05 index 1 mmio: [0xf0100000-0xf01fffff]
bus: 05 index 2 mmio: [0x0-0x0]
bus: 05 index 3 mmio: [0x0-0x0]
bus: 08 index 0 io port: [0x3000-0x3fff]
bus: 08 index 1 mmio: [0xf0200000-0xf02fffff]
bus: 08 index 2 mmio: [0x50000000-0x53ffffff]
bus: 08 index 3 io port: [0x00-0xffff]
bus: 08 index 4 mmio: [0x000000-0xffffffff]
bus: 09 index 0 io port: [0x3000-0x30ff]
bus: 09 index 1 io port: [0x3400-0x34ff]
bus: 09 index 2 mmio: [0x50000000-0x53ffffff]
bus: 09 index 3 mmio: [0x58000000-0x5bffffff]
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
NET: Registered protocol family 1
Unpacking initramfs... done
Freeing initrd memory: 521k freed
Simple Boot Flag at 0x7b set to 0x1
apm: BIOS not found.
highmem bounce pool size: 64 pages
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
msgmni has been set to 1748
alg: No test for stdrng (krng)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
pci 0000:00:02.0: Boot video device
pcieport-driver 0000:00:1c.0: setting latency timer to 64
pcieport-driver 0000:00:1c.0: found MSI capability
pcieport-driver 0000:00:1c.0: irq 767 for MSI/MSI-X
pci_express 0000:00:1c.0:pcie00: allocate port service
pci_express 0000:00:1c.0:pcie02: allocate port service
pci_express 0000:00:1c.0:pcie03: allocate port service
pcieport-driver 0000:00:1c.1: setting latency timer to 64
pcieport-driver 0000:00:1c.1: found MSI capability
pcieport-driver 0000:00:1c.1: irq 766 for MSI/MSI-X
pci_express 0000:00:1c.1:pcie00: allocate port service
pci_express 0000:00:1c.1:pcie02: allocate port service
pci_express 0000:00:1c.1:pcie03: allocate port service
pcieport-driver 0000:00:1c.3: setting latency timer to 64
pcieport-driver 0000:00:1c.3: found MSI capability
pcieport-driver 0000:00:1c.3: irq 765 for MSI/MSI-X
pci_express 0000:00:1c.3:pcie00: allocate port service
pci_express 0000:00:1c.3:pcie02: allocate port service
pci_express 0000:00:1c.3:pcie03: allocate port service
vesafb: framebuffer at 0xe0000000, mapped to 0xf8080000, using 3072k, total 7872k
vesafb: mode is 1024x768x16, linelength=2048, pages=4
vesafb: scrolling: redraw
vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
Console: switching to colour frame buffer device 128x48
fb0: VESA VGA frame buffer device
isapnp: Scanning for PnP cards...
Switched to high resolution mode on CPU 0
isapnp: No Plug & Play device found
Serial: 8250/16550 driver4 ports, IRQ sharing disabled
input: Macintosh mouse button emulation as /class/input/input0
PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
i8042.c: Detected active multiplexing controller, rev 1.1.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX0 port at 0x60,0x64 irq 12
serio: i8042 AUX1 port at 0x60,0x64 irq 12
serio: i8042 AUX2 port at 0x60,0x64 irq 12
serio: i8042 AUX3 port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
cpuidle: using governor ladder
cpuidle: using governor menu
TCP cubic registered
NET: Registered protocol family 17
Using IPI No-Shortcut mode
registered taskstats version 1
Freeing unused kernel memory: 332k freed
input: AT Translated Set 2 keyboard as /class/input/input1
SCSI subsystem initialized
libata version 3.00 loaded.
ata_piix 0000:00:1f.1: version 2.12
ata_piix 0000:00:1f.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18
ata_piix 0000:00:1f.1: setting latency timer to 64
scsi0 : ata_piix
scsi1 : ata_piix
ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x1810 irq 14
ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x1818 irq 15
ata1.00: ATA-6: TOSHIBA MK4007GAL, BG101F, max UDMA/100
ata1.00: 78140160 sectors, multi 16: LBA48
ata1.00: configured for UDMA/100
ata2: port disabled. ignoring.
scsi 0:0:0:0: Direct-Access ATA TOSHIBA MK4007GA BG10 PQ: 0 ANSI: 5
Driver 'sd' needs updating - please use bus_type methods
sd 0:0:0:0: [sda] 78140160 512-byte hardware sectors: (40.0 GB/37.2 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 0:0:0:0: [sda] 78140160 512-byte hardware sectors: (40.0 GB/37.2 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 sda8 >
sd 0:0:0:0: [sda] Attached SCSI disk
ReiserFS: sda5: found reiserfs format "3.6" with standard journal
ReiserFS: sda5: using ordered data mode
ReiserFS: sda5: journal params: device sda5, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
ReiserFS: sda5: checking transaction log (sda5)
ReiserFS: sda5: Using r5 hash to sort names
rtc_cmos 00:04: RTC can wake from S4
rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
i801_smbus 0000:00:1f.3: PCI INT B -> GSI 19 (level, low) -> IRQ 19
sky2 driver version 1.22
sky2 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
sky2 0000:02:00.0: setting latency timer to 64
sky2 0000:02:00.0: Yukon-2 EC Ultra chip revision 2
sky2 0000:02:00.0: Marvell Yukon 88E8055 Gigabit Ethernet Controller
Part Number: Yukon 88E8055
Engineering Level: Rev. 1.2
Manufacturer: Marvell
sky2 0000:02:00.0: irq 764 for MSI/MSI-X
sky2 eth0: addr 00:17:42:69:5e:cb
cfg80211: Using static regulatory domain info
cfg80211: Regulatory domain: US
(start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
(2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2700 mBm)
(5170000 KHz - 5190000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
(5190000 KHz - 5210000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
(5210000 KHz - 5230000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
(5230000 KHz - 5330000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
(5735000 KHz - 5835000 KHz @ 40000 KHz), (600 mBi, 3000 mBm)
cfg80211: Calling CRDA for country: US
iwl3945: Intel(R) PRO/Wireless 3945ABG/BG Network Connection driver for Linux, 1.2.26ks
iwl3945: Copyright(c) 2003-2008 Intel Corporation
iwl3945 0000:05:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
iwl3945 0000:05:00.0: setting latency timer to 64
iwl3945: Detected Intel Wireless WiFi Link 3945ABG
iwl3945: Tunable channels: 11 802.11bg, 13 802.11a channels
phy0: Selected rate control algorithm 'iwl-3945-rs'
iwl3945 0000:05:00.0: PCI INT A disabled
HDA Intel 0000:00:1b.0: power state changed by ACPI to D0
HDA Intel 0000:00:1b.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
HDA Intel 0000:00:1b.0: setting latency timer to 64
input: HDA Digital PCBeep as /class/input/input2
ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
processor ACPI_CPU:00: registered as cooling_device0
Marking TSC unstable due to TSC halts in idle
ACPI: AC Adapter [AC] (on-line)
ACPI: Battery Slot [CMB1] (battery present)
input: Power Button (FF) as /class/input/input3
ACPI: Power Button (FF) [PWRF]
input: Lid Switch as /class/input/input4
ACPI: Lid Switch [LID]
input: Power Button (CM) as /class/input/input5
ACPI: Power Button (CM) [PWRB]
thermal LNXTHERM:01: registered as thermal_zone0
ACPI: Thermal Zone [TZ00] (27 C)
thermal LNXTHERM:02: registered as thermal_zone1
ACPI: Thermal Zone [TZ01] (27 C)
input: Fujitsu FUJ02B1 as /class/input/input6
ACPI: Fujitsu FUJ02B1 [FJEX] (on)
input: Fujitsu FUJ02E3 as /class/input/input7
ACPI: Fujitsu FUJ02E3 [FEXT] (on)
fujitsu-laptop: driver 0.4.3 successfully loaded.
acpi device:03: registered as cooling_device1
input: Video Bus as /class/input/input8
ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
input: PC Speaker as /class/input/input9
Error: Driver 'pcspkr' is already registered, aborting...
Linux agpgart interface v0.103
intel_rng: FWH not detected
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
agpgart-intel 0000:00:00.0: Intel 945GM Chipset
agpgart-intel 0000:00:00.0: detected 7932K stolen memory
agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xe0000000
sd 0:0:0:0: Attached scsi generic sg0 type 0
iTCO_vendor_support: vendor-support=0
iTCO_wdt: Intel TCO WatchDog Timer Driver v1.05
iTCO_wdt: Found a ICH7-M or ICH7-U TCO device (Version=2, TCOBASE=0x1060)
iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
yenta_cardbus 0000:08:03.0: CardBus bridge found [10cf:1254]
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
ehci_hcd 0000:00:1d.7: setting latency timer to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
Error: Driver 'pcspkr' is already registered, aborting...
ehci_hcd 0000:00:1d.7: debug port 1
ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf0644000
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 8 ports detected
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
uhci_hcd: USB Universal Host Controller Interface driver
uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
uhci_hcd 0000:00:1d.0: setting latency timer to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1d.0: irq 23, io base 0x00001820
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 20 (level, low) -> IRQ 20
uhci_hcd 0000:00:1d.1: setting latency timer to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1d.1: irq 20, io base 0x00001840
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
uhci_hcd 0000:00:1d.2: setting latency timer to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001860
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16
uhci_hcd 0000:00:1d.3: setting latency timer to 64
uhci_hcd 0000:00:1d.3: UHCI Host Controller
uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1d.3: irq 16, io base 0x00001880
usb usb5: configuration #1 chosen from 1 choice
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
yenta_cardbus 0000:08:03.0: ISA IRQ mask 0x0cb8, PCI irq 16
yenta_cardbus 0000:08:03.0: Socket status: 30000006
pci_bus 0000:08: Raising subordinate bus# of parent bus (#08) from #09 to #0c
yenta_cardbus 0000:08:03.0: pcmcia: parent PCI bridge I/O window: 0x3000 - 0x3fff
pcmcia_socket pcmcia_socket0: cs: IO port probe 0x3000-0x3fff: clean.
yenta_cardbus 0000:08:03.0: pcmcia: parent PCI bridge Memory window: 0xf0200000 - 0xf02fffff
yenta_cardbus 0000:08:03.0: pcmcia: parent PCI bridge Memory window: 0x50000000 - 0x53ffffff
ohci1394 0000:08:03.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[17] MMIO=[f0200000-f02007ff] Max Packet=[2048] IR/IT contexts=[4/4]
sdhci-pci 0000:08:03.2: SDHCI controller found [1180:0822] (rev 17)
sdhci-pci 0000:08:03.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16
mmc0: SDHCI controller on PCI [0000:08:03.2] using PIO
Synaptics Touchpad, model: 1, fw: 6.2, id: 0x1a0b1, caps: 0xa04711/0x202000
input: SynPS/2 Synaptics TouchPad as /class/input/input10
pcmcia_socket pcmcia_socket0: cs: IO port probe 0x100-0x3af: clean.
pcmcia_socket pcmcia_socket0: cs: IO port probe 0x3e0-0x4ff: clean.
pcmcia_socket pcmcia_socket0: cs: IO port probe 0x820-0x8ff: clean.
pcmcia_socket pcmcia_socket0: cs: IO port probe 0xc00-0xcf7: clean.
pcmcia_socket pcmcia_socket0: cs: IO port probe 0xa00-0xaff: clean.
usb 3-2: new full speed USB device using uhci_hcd and address 2
Clocksource tsc unstable (delta = -107815724 ns)
usb 3-2: configuration #1 chosen from 1 choice
usb 4-1: new full speed USB device using uhci_hcd and address 2
usb 4-1: configuration #1 chosen from 1 choice
ReiserFS: sda7: found reiserfs format "3.6" with standard journal
ReiserFS: sda7: using ordered data mode
ReiserFS: sda7: journal params: device sda7, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
ReiserFS: sda7: checking transaction log (sda7)
ReiserFS: sda7: Using r5 hash to sort names
ReiserFS: sda2: found reiserfs format "3.6" with standard journal
ReiserFS: sda2: using ordered data mode
ReiserFS: sda2: journal params: device sda2, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
ReiserFS: sda2: checking transaction log (sda2)
Bluetooth: Core ver 2.13
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
ReiserFS: sda2: Using r5 hash to sort names
ieee1394: Host added: ID:BUS[0-00:1023] GUID[00000e1003c6fc1b]
Bluetooth: Generic Bluetooth USB driver ver 0.3
usbcore: registered new interface driver btusb
Adding 2104472k swap on /dev/sda6. Priority:-1 extents:1 across:2104472k
sky2 eth0: enabling interface
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
ADDRCONF(NETDEV_UP): eth0: link is not ready
iwl3945 0000:05:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
iwl3945 0000:05:00.0: restoring config space at offset 0x1 (was 0x100002, writing 0x100006)
iwl3945 0000:05:00.0: irq 763 for MSI/MSI-X
iwl3945 0000:05:00.0: firmware: requesting iwlwifi-3945-1.ucode
Registered led device: iwl-phy0:radio
Registered led device: iwl-phy0:assoc
Registered led device: iwl-phy0:RX
Registered led device: iwl-phy0:TX
ADDRCONF(NETDEV_UP): wlan0: link is not ready
wlan0: direct probe to AP 00:17:3f:76:11:72 try 1
wlan0 direct probe responded
wlan0: authenticate with AP 00:17:3f:76:11:72
wlan0: authenticated
wlan0: associate with AP 00:17:3f:76:11:72
wlan0: RX AssocResp from 00:17:3f:76:11:72 (capab=0x461 status=0 aid=2)
wlan0: associated
ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
wlan0: no IPv6 routers present
wlan0: deauthenticated
wlan0: direct probe to AP 00:17:3f:76:11:72 try 1
wlan0 direct probe responded
wlan0: authenticate with AP 00:17:3f:76:11:72
wlan0: authenticated
wlan0: associate with AP 00:17:3f:76:11:72
wlan0: RX ReassocResp from 00:17:3f:76:11:72 (capab=0x461 status=0 aid=2)
wlan0: associated
[drm] Initialized drm 1.1.0 20060810
pci 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:02.0: setting latency timer to 64
[drm] Initialized i915 1.6.0 20080730 on minor 0
i2c /dev entries driver
i2c /dev entries driver
