W83667HG driver test for in6 and temp3

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Michael,

On Wed, 25 Feb 2009 11:18:23 -0500, Michael Hampton wrote:
> I applied this patch to my current Fedora 10 kernel but the patched
> module fails to load:
> root at underground ~ # modprobe w83627ehf
> FATAL: Error inserting w83627ehf
> (/lib/modules/2.6.27.15-170.2.24.fc10.x86_64/kernel/drivers/hwmon/w83627ehf.ko):
> No such device
> 
> I haven't tried with a vanilla kernel yet. I don't usually run them.
> 
> Interestingly, sensors-detect says the device has a different ID:

Different from what? 

> Some Super I/O chips may also contain sensors. We have to write to
> standard I/O ports to probe them. This is usually safe.
> Do you want to scan for Super I/O sensors? (YES/no):
> Probing for Super-I/O at 0x2e/0x2f
> Trying family `National Semiconductor'...                   No
> Trying family `SMSC'...                                     No
> Trying family `VIA/Winbond/Fintek'...                       Yes
> Found unknown chip with ID 0xa513
>     (logical device B has address 0x290, could be sensors)
> Probing for Super-I/O at 0x4e/0x4f
> Trying family `National Semiconductor'...                   No
> Trying family `SMSC'...                                     No
> Trying family `VIA/Winbond/Fintek'...                       No
> Trying family `ITE'...                                      No

The driver accepts IDs 0xa510 to 0xa51f so it should be OK.

-- 
Jean Delvare



[Index of Archives]     [Linux Kernel]     [Linux Hardware Monitoring]     [Linux USB Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [Yosemite Backpacking]

  Powered by Linux