Hello all , I got for some days an new Intel mobo ( http://www.intel.com/products/desktop/motherboards/dq45cb/dq45CB-overview.htm ) all seems to work fine on it but the senors ( probably something related to HECI / AMT and friends but I am not sure is why I've added Anas Nashif to CC ). In BIOS the HW monitoring is working but this is the ATM thing which does not work in Linux AFAIK. sensors-detect detects an LM96000 chip ( with lm85 driver ? ) on smbus but all temperatures are empty ?;/ Here the output : sudo sensors-detect # sensors-detect revision 5337 (2008-09-19 17:05:28 +0200) This program will help you determine which kernel modules you need to load to use lm_sensors most effectively. It is generally safe and recommended to accept the default answers to all questions, unless you know what you're doing. We can start with probing for (PCI) I2C or SMBus adapters. Do you want to probe now? (YES/no): Probing for PCI bus adapters... Use driver `i2c-i801' for device 0000:00:1f.3: Intel ICH10 We will now try to load each adapter module in turn. Load `i2c-i801' (say NO if built into your kernel)? (YES/no): Module loaded successfully. If you have undetectable or unsupported I2C/SMBus adapters, you can have them scanned by manually loading the modules before running this script. We are now going to do the I2C/SMBus adapter probings. Some chips may be double detected; we choose the one with the highest confidence value in that case. If you found that the adapter hung after probing a certain address, you can specify that address to remain unprobed. Next adapter: SMBus I801 adapter at f000 (i2c-0) Do you want to scan it? (YES/no/selectively): Client found at address 0x2e Probing for `Myson MTP008'... No Probing for `National Semiconductor LM78'... No Probing for `National Semiconductor LM78-J'... No Probing for `National Semiconductor LM79'... No Probing for `National Semiconductor LM80'... No Probing for `National Semiconductor LM85'... No Probing for `National Semiconductor LM96000'... Success! (confidence 7, driver `lm85') Probing for `Analog Devices ADM1027'... No Probing for `Analog Devices ADT7460 or ADT7463'... No Probing for `SMSC EMC6D100 or EMC6D101'... No Probing for `SMSC EMC6D102'... No Probing for `SMSC EMC6D103'... No Probing for `Analog Devices ADT7462'... No Probing for `Analog Devices ADT7467 or ADT7468'... No Probing for `Analog Devices ADT7470'... No Probing for `Analog Devices ADT7473'... No Probing for `Analog Devices ADT7475'... No Probing for `Analog Devices ADT7476'... No Probing for `Andigilog aSC7611'... No Probing for `Andigilog aSC7621'... No Probing for `National Semiconductor LM87'... No Probing for `National Semiconductor LM93'... No Probing for `Winbond W83781D'... No Probing for `Winbond W83782D'... No Probing for `Winbond W83792D'... No Probing for `Winbond W83793R/G'... No Probing for `Winbond W83791SD'... No Probing for `Winbond W83627HF'... No Probing for `Winbond W83627EHF'... No Probing for `Winbond W83627DHG'... No Probing for `Asus AS99127F (rev.1)'... No Probing for `Asus AS99127F (rev.2)'... No Probing for `Asus ASB100 Bach'... No Probing for `Winbond W83L786NR/NG/R/G'... No Probing for `Winbond W83L785TS-S'... No Probing for `Analog Devices ADM9240'... No Probing for `Dallas Semiconductor DS1780'... No Probing for `National Semiconductor LM81'... No Probing for `Analog Devices ADM1026'... No Probing for `Analog Devices ADM1025'... No Probing for `Analog Devices ADM1029'... No Probing for `Analog Devices ADM1030'... No Probing for `Analog Devices ADM1031'... No Probing for `Analog Devices ADM1022'... No Probing for `Texas Instruments THMC50'... No Probing for `Analog Devices ADM1028'... No Probing for `Texas Instruments THMC51'... No Probing for `ITE IT8712F'... No Probing for `SMSC DME1737'... No Probing for `SMSC SCH5027D-NW'... No Probing for `Fintek F75373S/SG'... No Probing for `Fintek F75375S/SP'... No Probing for `Fintek F75387SG/RG'... No Probing for `Analog Devices ADM1024'... No Probing for `Winbond W83791D'... No Client found at address 0x50 Probing for `Analog Devices ADM1033'... No Probing for `Analog Devices ADM1034'... No Probing for `SPD EEPROM'... Yes (confidence 8, not a hardware monitoring chip) Probing for `EDID EEPROM'... No Some chips are also accessible through the ISA I/O ports. We have to write to arbitrary I/O ports to probe them. This is usually safe though. Yes, you do have ISA I/O ports even if you do not have any ISA slots! Do you want to scan the ISA I/O ports? (YES/no): Probing for `National Semiconductor LM78' at 0x290... No Probing for `National Semiconductor LM78-J' at 0x290... No Probing for `National Semiconductor LM79' at 0x290... No Probing for `Winbond W83781D' at 0x290... No Probing for `Winbond W83782D' at 0x290... No Probing for `IPMI BMC KCS' at 0xca0... No Probing for `IPMI BMC SMIC' at 0xca8... No Some Super I/O chips may also contain sensors. We have to write to standard I/O ports to probe them. This is usually safe. Do you want to scan for Super I/O sensors? (YES/no): Probing for Super-I/O at 0x2e/0x2f Trying family `National Semiconductor'... Yes Found `Nat. Semi. PC8374L Super IO Sensors' (but not activated) Probing for Super-I/O at 0x4e/0x4f Trying family `National Semiconductor'... No Trying family `SMSC'... No Trying family `VIA/Winbond/Fintek'... No Trying family `ITE'... No Some south bridges, CPUs or memory controllers may also contain embedded sensors. Do you want to scan for them? (YES/no): Silicon Integrated Systems SIS5595... No VIA VT82C686 Integrated Sensors... No VIA VT8231 Integrated Sensors... No AMD K8 thermal sensors... No AMD K10 thermal sensors... No Intel Core family thermal sensor... Success! (driver `coretemp') Intel AMB FB-DIMM thermal sensor... No VIA C7 thermal and voltage sensors... No ... The sensors output after loading coretemp and lm85 is : lm85-i2c-0-2e Adapter: SMBus I801 adapter at f000 V1.5: +0.00 V (min = +0.00 V, max = +3.32 V) VCore: +0.00 V (min = +0.00 V, max = +2.99 V) V3.3: +0.00 V (min = +0.00 V, max = +4.38 V) V5: +0.00 V (min = +0.00 V, max = +6.64 V) V12: +0.00 V (min = +0.00 V, max = +15.94 V) CPU_Fan: 0 RPM (min = 0 RPM) ALARM fan2: 0 RPM (min = 0 RPM) ALARM fan3: 0 RPM (min = 0 RPM) ALARM fan4: 0 RPM (min = 0 RPM) ALARM CPU Temp: +0.0?C (low = -127.0?C, high = +127.0?C) Board Temp: +0.0?C (low = -127.0?C, high = +127.0?C) Remote Temp: +0.0?C (low = -127.0?C, high = +127.0?C) cpu0_vid: +2.050 V coretemp-isa-0000 Adapter: ISA adapter Core 0: +45.0?C (high = +80.0?C, crit = +100.0?C) coretemp-isa-0001 Adapter: ISA adapter Core 1: +50.0?C (high = +80.0?C, crit = +100.0?C) coretemp-isa-0002 Adapter: ISA adapter Core 2: +46.0?C (high = +80.0?C, crit = +100.0?C) coretemp-isa-0003 Adapter: ISA adapter Core 3: +46.0?C (high = +80.0?C, crit = +100.0?C) I'm running right now 2.6.29-rc4-next-20090211 kernel. Any idea what is wrong here ? Best Regards , Gabriel C
