This is just a report to state that the two patches posted to this list previously [1] [2] got my sensors up and running on my new ASUS P6T6 WS Revolution board. They aren't perfect yet, as temp3 is reporting an obviously incorrect value, and I haven't figured out which sensors map to which physical devices on the motherboard yet, but it seems to be OK. Perhaps temp3 just isn't hooked up to anything. For the sake of convenience I've merged the two patches together and included it here. Hopefully this gets into a future kernel release, and soon. w83667hg-isa-0290 Adapter: ISA adapter in0: +1.22 V (min = +0.00 V, max = +1.74 V) in1: +1.70 V (min = +0.02 V, max = +0.00 V) ALARM in2: +3.22 V (min = +1.02 V, max = +0.26 V) ALARM in3: +3.18 V (min = +2.59 V, max = +0.00 V) ALARM in4: +1.70 V (min = +0.13 V, max = +1.04 V) ALARM in5: +2.04 V (min = +0.77 V, max = +0.62 V) ALARM in6: +1.02 V (min = +0.58 V, max = +0.13 V) ALARM in7: +3.36 V (min = +0.02 V, max = +1.34 V) ALARM in8: +3.31 V (min = +2.91 V, max = +1.22 V) ALARM fan1: 1854 RPM (min = 1288 RPM, div = 8) fan2: 1917 RPM (min = 14062 RPM, div = 16) ALARM fan3: 1795 RPM (min = 5273 RPM, div = 4) ALARM fan4: 1896 RPM (min = 1298 RPM, div = 8) fan5: 2410 RPM (min = 2636 RPM, div = 8) ALARM temp1: +37.0?C (high = +0.0?C, hyst = +4.0?C) ALARM sensor = thermistor temp2: +50.5?C (high = +80.0?C, hyst = +75.0?C) sensor = diode temp3: +124.5?C (high = +80.0?C, hyst = +75.0?C) ALARM sensor = thermistor cpu0_vid: +1.950 V [1] http://lists.lm-sensors.org/pipermail/lm-sensors/2008-December/024903.html [2] http://lists.lm-sensors.org/pipermail/lm-sensors/2009-January/025232.html -------------- next part -------------- An embedded and charset-unspecified text was scrubbed... Name: hwmon-add-support-for-w83667hg.patch Url: http://lists.lm-sensors.org/pipermail/lm-sensors/attachments/20090205/9d1c8191/attachment.pl