Jean Delvare wrote: > Hi Steve, > > On Wed, 31 Dec 2008 21:56:47 -0500, Stephen Clark wrote: >> I have a new intel DG33FB mainboard when I run sensors-detect I get the following: >> ... >> Trying family `SMSC'... Yes >> Found `SMSC LPC47M182 Super IO Fan Sensors' >> (but not activated) >> ... >> Intel Core family thermal sensor... Success! >> (driver `coretemp') >> >> This lets me see the temps of the cores on my q6600 but not >> voltages or fan speeds. Are there any plans to support this >> main boards further? >> >> sensors version 3.0.2 with libsensors version 3.0.2 > > The hardware monitoring features of the LPC47M182 are very often > nut used (and thus disabled), we don't even have a driver for them. > > This means that hardware monitoring is done by either a chip on the > SMBus (Did sensors-detect find an SMBus to scan? Did it find any > unknown chip there maybe? Including the full output of sensors-detect > helps) or, if the board is based on an ICH8 or later Intel south > bridge, by the south bridge itself. We don't yet support the ICH8 > integrated sensors, unfortunately [1]. > > [1] http://lists.lm-sensors.org/pipermail/lm-sensors/2009-January/025045.html > Hi Jean, Thanks for the reply, here is the complete output of sensors-detect: # sensors-detect revision 5249 (2008-05-11 22:56:25 +0200) This program will help you determine which kernel modules you need to load to use lm_sensors most effectively. It is generally safe and recommended to accept the default answers to all questions, unless you know what you're doing. We can start with probing for (PCI) I2C or SMBus adapters. Do you want to probe now? (YES/no): Probing for PCI bus adapters... Use driver `i2c-i801' for device 0000:00:1f.3: Intel ICH9 We will now try to load each adapter module in turn. Module `i2c-i801' already loaded. If you have undetectable or unsupported I2C/SMBus adapters, you can have them scanned by manually loading the modules before running this script. We are now going to do the I2C/SMBus adapter probings. Some chips may be double detected; we choose the one with the highest confidence value in that case. If you found that the adapter hung after probing a certain address, you can specify that address to remain unprobed. Next adapter: SMBus I801 adapter at 3000 (i2c-0) Do you want to scan it? (YES/no/selectively): Client found at address 0x50 Probing for `Analog Devices ADM1033'... No Probing for `Analog Devices ADM1034'... No Probing for `SPD EEPROM'... Yes (confidence 8, not a hardware monitoring chip) Probing for `EDID EEPROM'... No Client found at address 0x51 Probing for `Analog Devices ADM1033'... No Probing for `Analog Devices ADM1034'... No Probing for `SPD EEPROM'... Yes (confidence 8, not a hardware monitoring chip) Probing for `EDID EEPROM'... No Client found at address 0x52 Probing for `Analog Devices ADM1033'... No Probing for `Analog Devices ADM1034'... No Probing for `SPD EEPROM'... Yes (confidence 8, not a hardware monitoring chip) Probing for `EDID EEPROM'... No Client found at address 0x53 Probing for `Analog Devices ADM1033'... No Probing for `Analog Devices ADM1034'... No Probing for `SPD EEPROM'... Yes (confidence 8, not a hardware monitoring chip) Probing for `EDID EEPROM'... No Some chips are also accessible through the ISA I/O ports. We have to write to arbitrary I/O ports to probe them. This is usually safe though. Yes, you do have ISA I/O ports even if you do not have any ISA slots! Do you want to scan the ISA I/O ports? (YES/no): Probing for `National Semiconductor LM78' at 0x290... No Probing for `National Semiconductor LM78-J' at 0x290... No Probing for `National Semiconductor LM79' at 0x290... No Probing for `Winbond W83781D' at 0x290... No Probing for `Winbond W83782D' at 0x290... No Probing for `IPMI BMC KCS' at 0xca0... No Probing for `IPMI BMC SMIC' at 0xca8... No Some Super I/O chips may also contain sensors. We have to write to standard I/O ports to probe them. This is usually safe. Do you want to scan for Super I/O sensors? (YES/no): Probing for Super-I/O at 0x2e/0x2f Trying family `National Semiconductor'... No Trying family `SMSC'... Yes Found `SMSC LPC47M182 Super IO Fan Sensors' (but not activated) Probing for Super-I/O at 0x4e/0x4f Trying family `National Semiconductor'... No Trying family `SMSC'... No Trying family `VIA/Winbond/Fintek'... No Trying family `ITE'... No Some south bridges, CPUs or memory controllers may also contain embedded sensors. Do you want to scan for them? (YES/no): Silicon Integrated Systems SIS5595... No VIA VT82C686 Integrated Sensors... No VIA VT8231 Integrated Sensors... No AMD K8 thermal sensors... No AMD K10 thermal sensors... No Intel Core family thermal sensor... Success! (driver `coretemp') Intel AMB FB-DIMM thermal sensor... No Now follows a summary of the probes I have just done. Just press ENTER to continue: Driver `coretemp' (should be inserted): Detects correctly: * Chip `Intel Core family thermal sensor' (confidence: 9) Do you want to overwrite /etc/sysconfig/lm_sensors? (YES/no): Starting lm_sensors: loading module coretemp [ OK ] [root at joker20 ~]# -- "They that give up essential liberty to obtain temporary safety, deserve neither liberty nor safety." (Ben Franklin) "The course of history shows that as a government grows, liberty decreases." (Thomas Jefferson)
