Hi Petar, On Mon, 29 Dec 2008 19:55:10 +0100, Petar wrote: > Hi list, > > [root at fearless mrtg]# sensors > it8712-isa-0290 > Adapter: ISA adapter > VCore 1: +1.33 V (min = +0.00 V, max = +4.08 V) > VCore 2: +2.61 V (min = +0.00 V, max = +4.08 V) > +3.3V: +3.15 V (min = +0.00 V, max = +4.08 V) > +5V: +5.13 V (min = +0.00 V, max = +6.85 V) > +12V: +11.90 V (min = +0.00 V, max = +16.32 V) > -12V: -9.07 V (min = -27.36 V, max = +3.93 V) > -5V: -8.44 V (min = -13.64 V, max = +4.03 V) > Stdby: +6.85 V (min = +0.00 V, max = +6.85 V) ALARM > VBat: +3.10 V > fan1: 1231 RPM (min = 0 RPM, div = 8) > fan3: 0 RPM (min = 0 RPM, div = 8) > M/B Temp: -55.0?C (low = +127.0?C, high = +127.0?C) sensor = transistor > CPU Temp: -2.0?C (low = +127.0?C, high = +127.0?C) sensor = transistor > Temp3: +33.0?C (low = +127.0?C, high = +127.0?C) sensor = thermal diode > cpu0_vid: +1.388 V > > > I guess temp1 is "CPU Temp" and temp3 is "M/B Temp". Definitely not. -55 degrees C suggests a broken or unconnected thermal sensor. > I cant tell what is temp2 doing but i think it is safe to ignore? -2 degrees C indeed doesn't look very reasonable. My guess would be that only temp3 is relevant on your system and that would be the CPU temperature. This would result in the following lines in sensors3.conf: ignore temp1 ignore temp2 label temp3 "CPU Temp" How many temperatures are displayed by your BIOS? > After editing sensors3.conf i got : > > paleksic at fearless html 0 $ sensors > it8712-isa-0290 > Adapter: ISA adapter > VCore 1: +1.22 V (min = +0.00 V, max = +4.08 V) > VCore 2: +2.61 V (min = +0.00 V, max = +4.08 V) > +3.3V: +3.17 V (min = +0.00 V, max = +4.08 V) > +5V: +5.05 V (min = +0.00 V, max = +6.85 V) > +12V: +12.10 V (min = +0.00 V, max = +16.32 V) > -12V: -14.97 V (min = -27.36 V, max = +3.93 V) > -5V: -11.01 V (min = -13.64 V, max = +4.03 V) > Stdby: +6.85 V (min = +0.00 V, max = +6.85 V) ALARM > VBat: +3.10 V > fan1: 1147 RPM (min = 0 RPM, div = 8) > fan3: 0 RPM (min = 0 RPM, div = 8) > CPU Temp: -55.0?C (low = +127.0?C, high = +127.0?C) sensor = transistor > M/B Temp: +31.0?C (low = +127.0?C, high = +127.0?C) sensor = thermal diode > cpu0_vid: +1.388 V > > Still no good :> Why is CPU Temp inverted and how can i fix it? It's not inverted, it's just wrong, most probably because there's no sensor connected to the input. -- Jean Delvare
