Signed-off-by: Jean Delvare <khali at linux-fr.org>
---
Documentation/hwmon/lm85 | 2 +-
drivers/hwmon/it87.c | 2 +-
drivers/hwmon/w83627ehf.c | 2 +-
3 files changed, 3 insertions(+), 3 deletions(-)
--- linux-2.6.28-rc7.orig/drivers/hwmon/w83627ehf.c 2008-12-05 23:58:15.000000000 +0100
+++ linux-2.6.28-rc7/drivers/hwmon/w83627ehf.c 2008-12-08 10:48:34.000000000 +0100
@@ -503,7 +503,7 @@ static struct w83627ehf_data *w83627ehf_
}
for (i = 0; i < 4; i++) {
- /* pwmcfg, tolarance mapped for i=0, i=1 to same reg */
+ /* pwmcfg, tolerance mapped for i=0, i=1 to same reg */
if (i != 1) {
pwmcfg = w83627ehf_read_value(data,
W83627EHF_REG_PWM_ENABLE[i]);
--- linux-2.6.28-rc7.orig/Documentation/hwmon/lm85 2008-10-24 09:27:31.000000000 +0200
+++ linux-2.6.28-rc7/Documentation/hwmon/lm85 2008-12-08 10:48:34.000000000 +0100
@@ -164,7 +164,7 @@ configured individually according to the
temperature. (PWM value from 0 to 255)
* pwm#_auto_pwm_minctl - this flags selects for temp#_auto_temp_off temperature
- the bahaviour of fans. Write 1 to let fans spinning at
+ the behaviour of fans. Write 1 to let fans spinning at
pwm#_auto_pwm_min or write 0 to let them off.
NOTE: It has been reported that there is a bug in the LM85 that causes the flag
--- linux-2.6.28-rc7.orig/drivers/hwmon/it87.c 2008-12-05 23:58:15.000000000 +0100
+++ linux-2.6.28-rc7/drivers/hwmon/it87.c 2008-12-08 10:48:49.000000000 +0100
@@ -1386,7 +1386,7 @@ static void __devinit it87_init_device(s
it87_write_value(data, IT87_REG_TEMP_HIGH(i), 127);
}
- /* Check if temperature channnels are reset manually or by some reason */
+ /* Check if temperature channels are reset manually or by some reason */
tmp = it87_read_value(data, IT87_REG_TEMP_ENABLE);
if ((tmp & 0x3f) == 0) {
/* Temp1,Temp3=thermistor; Temp2=thermal diode */
--
Jean Delvare
