hi, I got a few questions related to lm-sensors: 1) as far as I understand k8temp inaccuracies are related to my cpu hardware flaws and there is no way to work around it? athlon x2 5400+ g2 stepping http://products.amd.com/en-us/QuickSearch.aspx?q=ADO5400DOBOX 2) cpu fan (pwm) reading overflows at low speeds, and shows insane values. the sensor chip "it8712f-s 0815-kxs me3c2c l". there are some posts about newer versions using 16bits or something like this - does this apply on my one? and is it possible to correct the result via adjusting sensors3.conf (I prefer not to upgrade/recompile my 2.6.24.x kernel)? 3) that is the status for atk0110 ? I got asus m3a780-em motherboard, and hope ATK0110 readings will be prone to sensors3.conf errors, or am I wrong? p.s. I am not subscribed to the list, so cc to me please --- ArturasK. > ~# sensors -v && sensors -u && sensors > sensors version 3.0.2 with libsensors version 3.0.2 > k8temp-pci-00c3 > Adapter: PCI adapter > Core0 Temp: > temp1_input: 25.00 > Core0 Temp: > temp2_input: 8.00 > Core1 Temp: > temp3_input: 19.00 > Core1 Temp: > temp4_input: 19.00 > > it8712-isa-0290 > Adapter: ISA adapter > VCore 1: > in0_input: 1.14 > in0_min: 0.00 > in0_max: 4.08 > VCore 2: > in1_input: 4.08 > in1_min: 0.00 > in1_max: 4.08 > +3.3V: > in2_input: 3.22 > in2_min: 0.00 > in2_max: 4.08 > +5V: > in3_input: 6.85 > in3_min: 5.13 > in3_max: 6.85 > +12V: > in4_input: 12.86 > in4_min: 16.26 > in4_max: 16.32 > -12V: > in5_input: -15.46 > in5_min: -27.36 > in5_max: 3.93 > -5V: > in6_input: 4.03 > in6_min: -13.64 > in6_max: 4.03 > Stdby: > in7_input: 6.85 > in7_min: 0.00 > in7_max: 6.85 > VBat: > in8_input: 3.25 > fan1: > fan1_input: 24107.00 > fan1_min: 0.00 > fan1_div: 2.00 > fan2: > fan2_input: 0.00 > fan2_min: 0.00 > fan2_div: 2.00 > fan3: > fan3_input: 0.00 > fan3_min: 0.00 > fan3_div: 2.00 > M/B Temp: > temp1_input: 28.00 > temp1_max: 127.00 > temp1_min: 127.00 > temp1_type: 2.00 > CPU Temp: > temp2_input: 34.00 > temp2_max: 127.00 > temp2_min: -69.00 > temp2_type: 2.00 > Temp3: > temp3_input: 128.00 > temp3_max: 127.00 > temp3_min: -1.00 > temp3_type: 0.00 > cpu0_vid: > cpu0_vid: 1.55 > > k8temp-pci-00c3 > Adapter: PCI adapter > Core0 Temp: +25.0?C > Core0 Temp: +8.0?C > Core1 Temp: +19.0?C > Core1 Temp: +19.0?C > > it8712-isa-0290 > Adapter: ISA adapter > VCore 1: +1.14 V (min = +0.00 V, max = +4.08 V) > VCore 2: +4.08 V (min = +0.00 V, max = +4.08 V) > +3.3V: +3.22 V (min = +0.00 V, max = +4.08 V) > +5V: +6.85 V (min = +5.13 V, max = +6.85 V) > +12V: +12.86 V (min = +16.26 V, max = +16.32 V) > -12V: -15.46 V (min = -27.36 V, max = +3.93 V) > -5V: +4.03 V (min = -13.64 V, max = +4.03 V) > Stdby: +6.85 V (min = +0.00 V, max = +6.85 V) > VBat: +3.25 V > fan1: 24107 RPM (min = 0 RPM, div = 2) > fan2: 0 RPM (min = 0 RPM, div = 2) > fan3: 0 RPM (min = 0 RPM, div = 2) > M/B Temp: +28.0?C (low = +127.0?C, high = +127.0?C) sensor = transistor > CPU Temp: +34.0?C (low = -69.0?C, high = +127.0?C) sensor = transistor > Temp3: +128.0?C (low = -1.0?C, high = +127.0?C) sensor = disabled > cpu0_vid: +1.550 V
