The following series of patches apply to the new-style version of the w83791d
driver, with the earlier submitted fandiv patch applied. Hereby for
convenience a refreshed version of that patch which applies cleanly to the
current driver.
Marc
---
Update w83791d with fan bits in vbat mon register (7.48 of the
datasheet). This change allows all fans to have a divisor of 128,
and fixes a problem with incorrectly reported fan speeds.
Signed-off-by: Marc Hulsman <m.hulsman at tudelft.nl>
Acked-by: Jean Delvare <khali at linux-fr.org>
---
Documentation/hwmon/w83791d | 6 +++---
drivers/hwmon/w83791d.c | 24 ++++++++++++++++++++----
2 files changed, 23 insertions(+), 7 deletions(-)
---
diff -uprN linux-2.6.26-rc1-git6/drivers/hwmon/w83791d.c
linux-2.6.26-rc1-git6-modified2/drivers/hwmon/w83791d.c
--- linux-2.6.26-rc1-git6/drivers/hwmon/w83791d.c 2008-05-03
20:59:44.000000000 +0200
+++ linux-2.6.26-rc1-git6-modified2/drivers/hwmon/w83791d.c 2008-05-16
22:13:15.000000000 +0200
@@ -233,11 +233,9 @@ static u8 fan_to_reg(long rpm, int div)
static u8 div_to_reg(int nr, long val)
{
int i;
- int max;
- /* first three fan's divisor max out at 8, rest max out at 128 */
- max = (nr < 3) ? 8 : 128;
- val = SENSORS_LIMIT(val, 1, max) >> 1;
+ /* fan divisors max out at 128 */
+ val = SENSORS_LIMIT(val, 1, 128) >> 1;
for (i = 0; i < 7; i++) {
if (val == 0)
break;
@@ -519,6 +517,7 @@ static ssize_t store_fan_div(struct devi
unsigned long min;
u8 tmp_fan_div;
u8 fan_div_reg;
+ u8 vbat_reg;
int indx = 0;
u8 keep_mask = 0;
u8 new_shift = 0;
@@ -570,6 +569,16 @@ static ssize_t store_fan_div(struct devi
w83791d_write(client, W83791D_REG_FAN_DIV[indx],
fan_div_reg | tmp_fan_div);
+ /* Bit 2 of fans 0-2 is stored in the vbat register (bits 5-7) */
+ if (nr < 3) {
+ keep_mask = ~(1 << (nr + 5));
+ vbat_reg = w83791d_read(client, W83791D_REG_VBAT)
+ & keep_mask;
+ tmp_fan_div = (data->fan_div[nr] << (3 + nr)) & ~keep_mask;
+ w83791d_write(client, W83791D_REG_VBAT,
+ vbat_reg | tmp_fan_div);
+ }
+
/* Restore fan_min */
data->fan_min[nr] = fan_to_reg(min, DIV_FROM_REG(data->fan_div[nr]));
w83791d_write(client, W83791D_REG_FAN_MIN[nr], data->fan_min[nr]);
@@ -1245,6 +1254,7 @@ static struct w83791d_data *w83791d_upda
struct w83791d_data *data = i2c_get_clientdata(client);
int i, j;
u8 reg_array_tmp[3];
+ u8 vbat_reg;
mutex_lock(&data->update_lock);
@@ -1282,6 +1292,12 @@ static struct w83791d_data *w83791d_upda
data->fan_div[3] = reg_array_tmp[2] & 0x07;
data->fan_div[4] = (reg_array_tmp[2] >> 4) & 0x07;
+ /* The fan divisor for fans 0-2 get bit 2 from
+ bits 5-7 respectively of vbat register */
+ vbat_reg = w83791d_read(client, W83791D_REG_VBAT);
+ for (i = 0; i < 3; i++)
+ data->fan_div[i] |= (vbat_reg >> (3 + i)) & 0x04;
+
/* Update the first temperature sensor */
for (i = 0; i < 3; i++) {
data->temp1[i] = w83791d_read(client,
diff -uprN linux-2.6.26-rc1-git6/Documentation/hwmon/w83791d
linux-2.6.26-rc1-git6-modified2/Documentation/hwmon/w83791d
--- linux-2.6.26-rc1-git6/Documentation/hwmon/w83791d 2008-05-03
20:59:44.000000000 +0200
+++ linux-2.6.26-rc1-git6-modified2/Documentation/hwmon/w83791d 2008-05-16
22:10:16.000000000 +0200
@@ -22,6 +22,7 @@ Credits:
Additional contributors:
Sven Anders <anders at anduras.de>
+ Marc Hulsman <m.hulsman at tudelft.nl>
Module Parameters
-----------------
@@ -67,9 +68,8 @@ on until the temperature falls below the
Fan rotation speeds are reported in RPM (rotations per minute). An alarm is
triggered if the rotation speed has dropped below a programmable limit. Fan
-readings can be divided by a programmable divider (1, 2, 4, 8 for fan 1/2/3
-and 1, 2, 4, 8, 16, 32, 64 or 128 for fan 4/5) to give the readings more
-range or accuracy.
+readings can be divided by a programmable divider (1, 2, 4, 8, 16,
+32, 64 or 128 for all fans) to give the readings more range or accuracy.
Voltage sensors (also known as IN sensors) report their values in millivolts.
An alarm is triggered if the voltage has crossed a programmable minimum
-------------- next part --------------
A non-text attachment was scrubbed...
Name: w83791d_fandiv.patch
Type: text/x-diff
Size: 3868 bytes
Desc: not available
Url : http://lists.lm-sensors.org/pipermail/lm-sensors/attachments/20080806/d63a21c4/attachment.bin
