The new-style w83791d driver implements the optional detect() callback to cover the use cases of the legacy driver. Signed-off-by: Jean Delvare <khali at linux-fr.org> Cc: Marc Hulsman <m.hulsman at tudelft.nl> --- drivers/hwmon/w83791d.c | 207 ++++++++++++++++------------------------------- 1 file changed, 72 insertions(+), 135 deletions(-) --- linux-2.6.26-rc9.orig/drivers/hwmon/w83791d.c 2008-07-12 09:20:29.000000000 +0200 +++ linux-2.6.26-rc9/drivers/hwmon/w83791d.c 2008-07-12 10:27:11.000000000 +0200 @@ -247,7 +247,6 @@ static u8 div_to_reg(int nr, long val) } struct w83791d_data { - struct i2c_client client; struct device *hwmon_dev; struct mutex update_lock; @@ -286,9 +285,11 @@ struct w83791d_data { u8 vrm; /* hwmon-vid */ }; -static int w83791d_attach_adapter(struct i2c_adapter *adapter); -static int w83791d_detect(struct i2c_adapter *adapter, int address, int kind); -static int w83791d_detach_client(struct i2c_client *client); +static int w83791d_probe(struct i2c_client *client, + const struct i2c_device_id *id); +static int w83791d_detect(struct i2c_client *client, int kind, + struct i2c_board_info *info); +static int w83791d_remove(struct i2c_client *client); static int w83791d_read(struct i2c_client *client, u8 register); static int w83791d_write(struct i2c_client *client, u8 register, u8 value); @@ -300,12 +301,22 @@ static void w83791d_print_debug(struct w static void w83791d_init_client(struct i2c_client *client); +static const struct i2c_device_id w83791d_id[] = { + { "w83791d", w83791d }, + { } +}; +MODULE_DEVICE_TABLE(i2c, w83791d_id); + static struct i2c_driver w83791d_driver = { + .class = I2C_CLASS_HWMON, .driver = { .name = "w83791d", }, - .attach_adapter = w83791d_attach_adapter, - .detach_client = w83791d_detach_client, + .probe = w83791d_probe, + .remove = w83791d_remove, + .id_table = w83791d_id, + .detect = w83791d_detect, + .address_data = &addr_data, }; /* following are the sysfs callback functions */ @@ -905,49 +916,12 @@ static const struct attribute_group w837 .attrs = w83791d_attributes, }; -/* This function is called when: - * w83791d_driver is inserted (when this module is loaded), for each - available adapter - * when a new adapter is inserted (and w83791d_driver is still present) */ -static int w83791d_attach_adapter(struct i2c_adapter *adapter) -{ - if (!(adapter->class & I2C_CLASS_HWMON)) - return 0; - return i2c_probe(adapter, &addr_data, w83791d_detect); -} - - -static int w83791d_create_subclient(struct i2c_adapter *adapter, - struct i2c_client *client, int addr, - struct i2c_client **sub_cli) -{ - int err; - struct i2c_client *sub_client; - - (*sub_cli) = sub_client = - kzalloc(sizeof(struct i2c_client), GFP_KERNEL); - if (!(sub_client)) { - return -ENOMEM; - } - sub_client->addr = 0x48 + addr; - i2c_set_clientdata(sub_client, NULL); - sub_client->adapter = adapter; - sub_client->driver = &w83791d_driver; - strlcpy(sub_client->name, "w83791d subclient", I2C_NAME_SIZE); - if ((err = i2c_attach_client(sub_client))) { - dev_err(&client->dev, "subclient registration " - "at address 0x%x failed\n", sub_client->addr); - kfree(sub_client); - return err; - } - return 0; -} - -static int w83791d_detect_subclients(struct i2c_adapter *adapter, int address, - int kind, struct i2c_client *client) +static int w83791d_detect_subclients(struct i2c_client *client) { + struct i2c_adapter *adapter = client->adapter; struct w83791d_data *data = i2c_get_clientdata(client); + int address = client->addr; int i, id, err; u8 val; @@ -971,10 +945,7 @@ static int w83791d_detect_subclients(str val = w83791d_read(client, W83791D_REG_I2C_SUBADDR); if (!(val & 0x08)) { - err = w83791d_create_subclient(adapter, client, - val & 0x7, &data->lm75[0]); - if (err < 0) - goto error_sc_0; + data->lm75[0] = i2c_new_dummy(adapter, 0x48 + (val & 0x7)); } if (!(val & 0x80)) { if ((data->lm75[0] != NULL) && @@ -986,10 +957,8 @@ static int w83791d_detect_subclients(str err = -ENODEV; goto error_sc_1; } - err = w83791d_create_subclient(adapter, client, - (val >> 4) & 0x7, &data->lm75[1]); - if (err < 0) - goto error_sc_1; + data->lm75[1] = i2c_new_dummy(adapter, + 0x48 + ((val >> 4) & 0x7)); } return 0; @@ -997,53 +966,31 @@ static int w83791d_detect_subclients(str /* Undo inits in case of errors */ error_sc_1: - if (data->lm75[0] != NULL) { - i2c_detach_client(data->lm75[0]); - kfree(data->lm75[0]); - } + if (data->lm75[0] != NULL) + i2c_unregister_device(data->lm75[0]); error_sc_0: return err; } -static int w83791d_detect(struct i2c_adapter *adapter, int address, int kind) -{ - struct i2c_client *client; - struct device *dev; - struct w83791d_data *data; - int i, val1, val2; - int err = 0; - const char *client_name = ""; +/* Return 0 if detection is successful, -ENODEV otherwise */ +static int w83791d_detect(struct i2c_client *client, int kind, + struct i2c_board_info *info) +{ + struct i2c_adapter *adapter = client->adapter; + int val1, val2; + unsigned short address = client->addr; if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) { - goto error0; + return -ENODEV; } - /* OK. For now, we presume we have a valid client. We now create the - client structure, even though we cannot fill it completely yet. - But it allows us to access w83791d_{read,write}_value. */ - if (!(data = kzalloc(sizeof(struct w83791d_data), GFP_KERNEL))) { - err = -ENOMEM; - goto error0; - } - - client = &data->client; - dev = &client->dev; - i2c_set_clientdata(client, data); - client->addr = address; - client->adapter = adapter; - client->driver = &w83791d_driver; - mutex_init(&data->update_lock); - - /* Now, we do the remaining detection. */ - /* The w83791d may be stuck in some other bank than bank 0. This may make reading other information impossible. Specify a force=... parameter, and the Winbond will be reset to the right bank. */ if (kind < 0) { if (w83791d_read(client, W83791D_REG_CONFIG) & 0x80) { - dev_dbg(dev, "Detection failed at step 1\n"); - goto error1; + return -ENODEV; } val1 = w83791d_read(client, W83791D_REG_BANK); val2 = w83791d_read(client, W83791D_REG_CHIPMAN); @@ -1052,15 +999,13 @@ static int w83791d_detect(struct i2c_ada /* yes it is Bank0 */ if (((!(val1 & 0x80)) && (val2 != 0xa3)) || ((val1 & 0x80) && (val2 != 0x5c))) { - dev_dbg(dev, "Detection failed at step 2\n"); - goto error1; + return -ENODEV; } } /* If Winbond chip, address of chip and W83791D_REG_I2C_ADDR should match */ if (w83791d_read(client, W83791D_REG_I2C_ADDR) != address) { - dev_dbg(dev, "Detection failed at step 3\n"); - goto error1; + return -ENODEV; } } @@ -1075,30 +1020,33 @@ static int w83791d_detect(struct i2c_ada /* get vendor ID */ val2 = w83791d_read(client, W83791D_REG_CHIPMAN); if (val2 != 0x5c) { /* the vendor is NOT Winbond */ - dev_dbg(dev, "Detection failed at step 4\n"); - goto error1; + return -ENODEV; } val1 = w83791d_read(client, W83791D_REG_WCHIPID); if (val1 == 0x71) { kind = w83791d; } else { if (kind == 0) - dev_warn(dev, + dev_warn(&adapter->dev, "w83791d: Ignoring 'force' parameter " "for unknown chip at adapter %d, " "address 0x%02x\n", i2c_adapter_id(adapter), address); - goto error1; + return -ENODEV; } } - if (kind == w83791d) { - client_name = "w83791d"; - } else { - dev_err(dev, "w83791d: Internal error: unknown kind (%d)?!?\n", - kind); - goto error1; - } + strlcpy(info->type, "w83791d", I2C_NAME_SIZE); + + return 0; +} + +static int w83791d_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct w83791d_data *data; + struct device *dev = &client->dev; + int i, val1, err; #ifdef DEBUG val1 = w83791d_read(client, W83791D_REG_DID_VID4); @@ -1106,15 +1054,18 @@ static int w83791d_detect(struct i2c_ada (val1 >> 5) & 0x07, (val1 >> 1) & 0x0f, val1); #endif - /* Fill in the remaining client fields and put into the global list */ - strlcpy(client->name, client_name, I2C_NAME_SIZE); + data = kzalloc(sizeof(struct w83791d_data), GFP_KERNEL); + if (!data) { + err = -ENOMEM; + goto error0; + } - /* Tell the I2C layer a new client has arrived */ - if ((err = i2c_attach_client(client))) - goto error1; + i2c_set_clientdata(client, data); + mutex_init(&data->update_lock); - if ((err = w83791d_detect_subclients(adapter, address, kind, client))) - goto error2; + err = w83791d_detect_subclients(client); + if (err) + goto error1; /* Initialize the chip */ w83791d_init_client(client); @@ -1141,43 +1092,29 @@ static int w83791d_detect(struct i2c_ada error4: sysfs_remove_group(&client->dev.kobj, &w83791d_group); error3: - if (data->lm75[0] != NULL) { - i2c_detach_client(data->lm75[0]); - kfree(data->lm75[0]); - } - if (data->lm75[1] != NULL) { - i2c_detach_client(data->lm75[1]); - kfree(data->lm75[1]); - } -error2: - i2c_detach_client(client); + if (data->lm75[0] != NULL) + i2c_unregister_device(data->lm75[0]); + if (data->lm75[1] != NULL) + i2c_unregister_device(data->lm75[1]); error1: kfree(data); error0: return err; } -static int w83791d_detach_client(struct i2c_client *client) +static int w83791d_remove(struct i2c_client *client) { struct w83791d_data *data = i2c_get_clientdata(client); - int err; - - /* main client */ - if (data) { - hwmon_device_unregister(data->hwmon_dev); - sysfs_remove_group(&client->dev.kobj, &w83791d_group); - } - if ((err = i2c_detach_client(client))) - return err; + hwmon_device_unregister(data->hwmon_dev); + sysfs_remove_group(&client->dev.kobj, &w83791d_group); - /* main client */ - if (data) - kfree(data); - /* subclient */ - else - kfree(client); + if (data->lm75[0] != NULL) + i2c_unregister_device(data->lm75[0]); + if (data->lm75[1] != NULL) + i2c_unregister_device(data->lm75[1]); + kfree(data); return 0; } -- Jean Delvare