> Hi Jean,
>
>
>> Hi Juerg,
>>
>> Please set the attachment type to text/plain next time.
>
> Hmm... Gmail doesn't give me control over this (I think) and I haven't
> change anything. Weird.
>
>
>> On Thu, 10 Jul 2008 12:37:26 -0700, Juerg Haefliger wrote:
>>> Add detection of VIA VT1212 and SMSC EMC2700LPC Super IOs.
>>>
>>> Signed-off-by: Juerg Haefliger <juergh at gmail.com>
>>
>>> Index: lm-sensors-3.0.0/prog/detect/sensors-detect
>>> ===================================================================
>>> --- lm-sensors-3.0.0.orig/prog/detect/sensors-detect 2008-07-10 12:16:17.709353000 -0700
>>> +++ lm-sensors-3.0.0/prog/detect/sensors-detect 2008-07-10 12:28:41.895364000 -0700
>>> @@ -1666,6 +1666,11 @@
>>> devid => 0x77,
>>> },
>>> {
>>> + name => "SMSC EMC2700LPC Super IO",
>>> + # no datasheet
>>> + devid => 0x67,
>>> + },
>>> + {
>>> name => "SMSC FDC37B72x Super IO",
>>> driver => "not-a-sensor",
>>> devid => 0x4c,
>>> @@ -1908,6 +1913,11 @@
>>> alias_detect => sub { vt1211_alias_detect(@_); },
>>> },
>>> {
>>> + name => "VIA VT1212 Super IO Lite",
>>> + driver => "not-a-sensor",
>>> + devid => 0x3f,
>>
>> Are you sure? On Wilken's system, which according to the documentation
>> has a VT1212 chip, sensors-detect says:
>>
>> Found unknown chip with ID 0xfc01
>>
>> Which would mean a devid value of 0xfc rather then 0x3f.
>
> From the datasheet (sorry for the formatting):
> 7 Configuration Index RW 00
> 20 Device ID RO 3F
> 21 Device Revision RO 01
> 22 Power Down Control RW 00
> 23 LPC Wait State Select RW 09
> 24 GPIO Port 1 Pin Select RW 00
> 25 GPIO Port 2 Pin Select RW 00
I just realized that there's two different device IDs for the two
packaging options, 3F/3E. I'll respin the patch.
...juerg
> ...juerg
>
>
>
>>> + },
>>> + {
>>> name => "Winbond W83627HF/F/HG/G Super IO Sensors",
>>> driver => "w83627hf",
>>> devid => 0x52,
>>
>> Thanks,
>> --
>> Jean Delvare
>>
>
