Here it is:
vendor_id = "CentaurHauls"
version information (1/eax):
processor type = primary processor (0)
family = Intel Pentium Pro/II/III/Celeron, AMD
Athlon/Duron, Cyrix M2, VIA C3 (6)
model = 0xa (10)
stepping id = 0x9 (9)
extended family = 0x0 (0)
extended model = 0x0 (0)
(simple synth) = VIA C7 / C7-M (Esther WinChip C5J core)
miscellaneous (1/ebx):
process local APIC physical ID = 0x0 (0)
cpu count = 0x1 (1)
CLFLUSH line size = 0x8 (8)
brand index = 0x0 (0)
brand id = 0x00 (0): unknown
feature information (1/edx):
x87 FPU on chip = true
virtual-8086 mode enhancement = true
debugging extensions = true
page size extensions = true
time stamp counter = true
RDMSR and WRMSR support = true
physical address extensions = true
machine check exception = true
CMPXCHG8B inst. = true
APIC on chip = true
SYSENTER and SYSEXIT = true
memory type range registers = true
PTE global bit = true
machine check architecture = false
conditional move/compare instruction = true
page attribute table = true
page size extension = false
processor serial number = false
CLFLUSH instruction = true
debug store = false
thermal monitor and clock ctrl = true
MMX Technology = true
FXSAVE/FXRSTOR = true
SSE extensions = true
SSE2 extensions = true
self snoop = false
hyper-threading / multi-core supported = false
therm. monitor = false
According to the datasheet, this should be 'true'.
IA64 = false
pending break event = true
feature information (1/ecx):
PNI/SSE3: Prescott New Instructions = true
MONITOR/MWAIT = false
CPL-qualified debug store = false
VMX: virtual machine extensions = false
Enhanced Intel SpeedStep Technology = true
thermal monitor 2 = false
Same here.
context ID: adaptive or shared L1 data = false
cmpxchg16b available = false
xTPR disable = false
extended processor signature (0x80000001/eax):
generation = 0x0 (0)
model = 0x0 (0)
stepping = 0x0 (0)
(simple synth) = unknown
extended feature flags (0x80000001/edx):
x87 FPU on chip = false
virtual-8086 mode enhancement = false
debugging extensions = false
page size extensions = false
time stamp counter = false
RDMSR and WRMSR support = false
physical address extensions = false
machine check exception = false
CMPXCHG8B inst. = false
APIC on chip = false
SYSCALL and SYSRET instructions = false
memory type range registers = false
global paging extension = false
machine check architecture = false
conditional move/compare instruction = false
page attribute table = false
page size extension = false
multiprocessing capable = false
AMD multimedia instruction extensions = false
MMX Technology = false
extended MMX = false
SSE extensions = false
AA-64 = false
3DNow! instruction extensions = false
3DNow! instructions = false
brand = " VIA Esther processor 1000MHz"
L1 TLB/cache information: 2M/4M pages & L1 TLB (0x80000005/eax):
instruction # entries = 0x0 (0)
instruction associativity = 0x0 (0)
data # entries = 0x0 (0)
data associativity = 0x0 (0)
L1 TLB/cache information: 4K pages & L1 TLB (0x80000005/ebx):
instruction # entries = 0x80 (128)
instruction associativity = 0x8 (8)
data # entries = 0x80 (128)
data associativity = 0x8 (8)
L1 data cache information (0x80000005/ecx):
line size (bytes) = 0x40 (64)
lines per tag = 0x1 (1)
associativity = 0x4 (4)
size (Kb) = 0x40 (64)
L1 instruction cache information (0x80000005/ecx):
line size (bytes) = 0x40 (64)
lines per tag = 0x1 (1)
associativity = 0x4 (4)
size (Kb) = 0x40 (64)
L2 TLB/cache information: 2M/4M pages & L2 TLB (0x80000006/eax):
instruction # entries = 0x0 (0)
instruction associativity = L2 off (0)
data # entries = 0x0 (0)
data associativity = L2 off (0)
L2 TLB/cache information: 4K pages & L2 TLB (0x80000006/ebx):
instruction # entries = 0x0 (0)
instruction associativity = L2 off (0)
data # entries = 0x0 (0)
data associativity = L2 off (0)
L2 unified cache information (0x80000006/ecx):
line size (bytes) = 0x40 (64)
lines per tag = 0x1 (1)
associativity = 0xa (10)
size (Kb) = 0x80 (128)
0xc0000001: eax=0x00000000
extended feature flags (0xc0000001/edx):
alternate instruction set = false
alternate instruction set enabled = false
random number generator = true
random number generator enabled = true
LongHaul MSR 0000_110Ah = false
FEMMS = false
advanced cryptography engine (ACE) = true
advanced cryptography engine (ACE)enabled = true
0xc0000002: eax=0x00000000 ebx=0x08000810 ecx=0x08100a13 edx=0x42000000
Wilken, what motherboard is this? Are there any BIOS settings (thermal
management) that you can play around with? Try different thermal
management settings and rerun cpuid and check if the thermal monitors
show up as 'true'.
I have a cpuid dump from Sergio (C7 on a LN10000 board) and the only
difference between his dump and yours is that his shows 'true' for
both thermal monitors. Maybe your BIOS disables these features on your
CPU.
...juerg
On Fri, Jul 4, 2008 at 12:07 AM, Jean Delvare <khali at linux-fr.org> wrote:
> On Thu, 3 Jul 2008 07:39:24 +0200, Wilken Gottwalt wrote:
>> Am Mittwoch 02 Juli 2008 20:22:57 schrieb Juerg Haefliger:
>> > Hi Jean, Wilken,
>> >
>> > Thanks for testing the driver. Wilken, can you run the attached tool
>> > with and without the '-r' option and send the output? Your CPU should
>> > have the diode.
>> >
>> > ...juerg
>>
>> Hi Juerg,
>>
>> this is a really cute little app. Okay, here is the output.
>
> Err, where?
>
> --
> Jean Delvare
>
