Dear Srs, I want to monitor some temperatures in a server with a Supermicro X6DH8-XG2 motherboard with 2 Xeon processors, running Linux 2.6.25.4 and lm-sensors v3.0.2, in a Debian Etch box. LM93 and PC87427 Super I/O sensor chips are detected, according to the wiki only LM93 is fully supported by lm-sensors, in PC87427 fan monitoring only is available, this is an example of the command output: ======================================================================== ====== # sensors lm93-i2c-0-2e Adapter: SMBus I801 adapter at 1100 in1: +0.94 V (min = +0.83 V, max = +1.02 V) in2: +0.94 V (min = +0.83 V, max = +1.02 V) in3: +0.94 V (min = +0.83 V, max = +1.02 V) in4: +1.21 V (min = +1.08 V, max = +1.32 V) in5: +1.49 V (min = +1.35 V, max = +1.66 V) in6: +1.50 V (min = +1.35 V, max = +1.66 V) in7: +1.35 V (min = +1.02 V, max = +1.54 V) in8: +1.36 V (min = +1.02 V, max = +1.54 V) in9: +3.35 V (min = +2.97 V, max = +3.64 V) in10: +5.02 V (min = +4.47 V, max = +5.49 V) in11: +0.00 V (min = +2.25 V, max = +2.76 V) in12: +1.79 V (min = +1.77 V, max = +2.17 V) in13: +1.19 V (min = +0.89 V, max = +1.09 V) in14: +0.97 V (min = +0.89 V, max = +1.09 V) in15: +0.30 V (min = +0.07 V, max = +0.54 V) in16: +3.41 V (min = +2.97 V, max = +3.63 V) fan1: 0 RPM (min = 0 RPM) fan2: 0 RPM (min = 0 RPM) fan3: 0 RPM (min = 0 RPM) fan4: 0 RPM (min = 0 RPM) temp1: +32.0?C (low = -128.0?C, high = -128.0?C) temp2: +32.0?C (low = -128.0?C, high = -128.0?C) temp3: +27.0?C (low = -128.0?C, high = +50.0?C) cpu0_vid: +1.088 V cpu1_vid: +1.088 V ======================================================================== ====== What's the meaning of temp1, temp2 and temp3 params? maybe physical processors (temp1, temp2) and mother board (temp3)? There's no info about lm93 chip in "/etc/sensors3.conf" file.. Is there anyway to get processor temperatures in this motherboard using ACPI? There's no data inside "/proc/acpi/thermal_zone/".. running "acpi" I get this error: # modprobe thermal # acpi --thermal No support for device type: thermal Regards! -- Santi Saez
