Hi Jaroslav, On Tue, May 27, 2008 at 12:09 AM, Jaroslav Vacha <vacha at email.cz> wrote: > Hi Juerg, > thanks for your hints! After 'depmod -a' and patch driver is loaded > now and lm_sensors are working: > > # sensors > sch311x-isa-0a70 > Adapter: ISA adapter > in0: +0.00 V (min = +0.00 V, max = +6.64 V) ALARM > in1: +1.76 V (min = +0.00 V, max = +2.99 V) > in2: +3.25 V (min = +0.00 V, max = +4.38 V) > in3: +4.99 V (min = +0.00 V, max = +6.64 V) > in4: +12.31 V (min = +0.00 V, max = +15.94 V) > in5: +3.27 V (min = +0.00 V, max = +4.38 V) > in6: +3.17 V (min = +0.00 V, max = +4.38 V) > fan1: 0 RPM (min = 0 RPM) > fan2: 1747 RPM (min = 0 RPM) > fan3: 0 RPM (min = 0 RPM) > temp1: +47.6?C (low = -127.0?C, high = +127.0?C) > temp2: +42.8?C (low = -127.0?C, high = +127.0?C) > temp3: +41.1?C (low = -127.0?C, high = +127.0?C) > cpu0_vid: +0.000 V > > I have only small error in messages log regarding hwmon-vid module, > but I can live with it..: > > May 27 10:33:34 obelix kernel: dme1737 dme1737.2672: Found a SCH311x > chip at 0x0a70 > May 27 10:33:34 obelix kernel: dme1737 dme1737.2672: Optional > features: pwm3=yes, pwm5=no, pwm6=no, fan3=yes, fan4=no, fan5=no, > fan6=no. > May 27 10:33:34 obelix kernel: hwmon-vid: Unknown VRM version of > your x86 CPU > That's because the sch311x doesn't have VID inputs. I need to fix that when time permits. ...juerg > > Thanks again for your kind help! > Jaroslav > > > > > ------------ P?vodn? zpr?va ------------ > Od: Juerg Haefliger <juergh at gmail.com> > P?edm?t: Re: dme1737 under CentOS 2.6.18 kernel > Datum: 27.5.2008 01:37:05 > --------------------------------------------- > Hi Jaroslav, > > > > On Mon, May 26, 2008 at 12:08 PM, Jaroslav Vacha <vacha at email.cz > (mailto:vacha at email.cz)> wrote: > " Hi, > I'm trying to compile dme1737 driver under CentOS 5.1 with 2.6.18- > 53.1.21.el5 kernel to support VIA EPIA-SN 18000G motherboard > sensors. > Followed Juerg's instruction from post http://lists.lm-sensors.org/ > pipermail/lm-sensors/2007-December/022166.html<http://lists.lm-sensors.org/pipermail/lm-sensors/2007-December/022166.html> > ( > http://lists.lm-sensors.org/pipermail/lm-sensors/2007-December/022166.html > ) > > Code compiled with warnings: > > #make all > make -C /lib/modules/`uname -r`/build M=/install/lm_sensors/driver > modules > make[1]: Entering directory `/usr/src/kernels/2.6.18-53.1.21.el5-i > 686' > CC [M] /install/lm_sensors/driver/dme1737.o > /install/lm_sensors/driver/dme1737.c:55: warning: initialization > discards qualifiers from pointer target type > /install/lm_sensors/driver/dme1737.c: In function 'dme1737_i2c_ > detect': > /install/lm_sensors/driver/dme1737.c:2139: warning: assignment from > incompatible pointer type > /install/lm_sensors/driver/dme1737.c: In function 'dme1737_i2c_ > detach_client': > /install/lm_sensors/driver/dme1737.c:2172: warning: passing argument > 1 of 'hwmon_device_unregister' from incompatible pointer type > /install/lm_sensors/driver/dme1737.c: In function 'dme1737_isa_ > probe': > /install/lm_sensors/driver/dme1737.c:2324: warning: assignment from > incompatible pointer type > /install/lm_sensors/driver/dme1737.c: In function 'dme1737_isa_ > remove': > /install/lm_sensors/driver/dme1737.c:2348: warning: passing argument > 1 of 'hwmon_device_unregister' from incompatible pointer type > Building modules, stage 2. > MODPOST > CC /install/lm_sensors/driver/dme1737.mod.o > LD [M] /install/lm_sensors/driver/dme1737.ko > make[1]: Leaving directory `/usr/src/kernels/2.6.18-53.1.21.el5-i > 686' > [root at server driver]# > > dme1737.ko module is created and copied in /lib/modules/2.6.18- > 53.1.21.el5/kernel/drivers/hwmon path. But when I tried to insert > this module into kernel, module is not loaded with following error > message: > > #insmod dme1737.ko > insmod: error inserting 'dme1737.ko': -1 Unknown symbol in module > > Do you have any idea where is a mistake? Thanks for your reply > " > > The dme1737 driver depends on i2c-core and hwmon-vid. My guess is > one or both of those aren't loaded. Do 'depmod -a' and then > 'modprobe dme1737 probe_all_addr=1' to load the driver an all the > modules it depends upon. > Note that for the driver to correctly work on a SN18000 board, you > need to have the following patch applied (hence the probe_all_addr > option): > http://lists.lm-sensors.org/pipermail/lm-sensors/2008-April/022802. > html<http://lists.lm-sensors.org/pipermail/lm-sensors/2008-April/022802.html> > (http://lists.lm-sensors.org/pipermail/lm-sensors/2008-April/022802.html) > > ...juerg > > > " Jaroslav > > > > > _______________________________________________ > lm-sensors mailing list > lm-sensors at lm-sensors.org(mailto:lm-sensors at lm-sensors.org) > http://lists.lm-sensors.org/mailman/listinfo/lm-sensors > (http://lists.lm-sensors.org/mailman/listinfo/lm-sensors) > " > > > _______________________________________________ > lm-sensors mailing list > lm-sensors at lm-sensors.org > http://lists.lm-sensors.org/mailman/listinfo/lm-sensors > -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.lm-sensors.org/pipermail/lm-sensors/attachments/20080527/c71542a9/attachment.html
